CenturionPro HPTT - High Performance TableTop Bucker

Free FedEx shipping to anywhere in North America*

Pound for pound the market’s most compact and cost-efficient bucker, the HP TableTop benefits from two rollers that pull the stem into the de-stemmer to pop flowers off at an exceptional rate. Ideal for stems up to 3/8”, with 2-hole sizes to strip plants carefully and comprehensively, the robust machine can process up to 75 pounds of wet cannabis or hemp per hour (up to 15 pounds dry). The impressive power and precision are driven by a 0.33 HP motor with variable speed control, for enhanced versatility bucking wet and dry plants.

PAIRS WITH THE TOP HOME-GROWER TRIMMING SYSTEM

Powerful, Versatile and Combinable

Upgrade your HPTT Bucker to include an HPTT Bucker Stand. Adding the HPTT Bucker Stand allows you to combine your HPTT Bucker with the world’s top home-grower trimming systems such as the CenturionPro TableTop and Twister T6.

*The TableTop Bundle comes standard with a Mesh-Hopper. Plastic Hopper shown is available for an additional cost.

PORTABLE & LIGHTWEIGHT

Has handles and weighs under 50lbs

The elite bucking solution was designed with portability in mind, weighing in at just 46 pounds with sturdy stainless-steel carrying handles. Buck on the go with the discreet CenturionPro HPTT bucker.

GREAT BUCKING VALUE

The world's most cost-efficient bucking solution

Pound for pound the market’s most compact and cost-efficient bucker, the HP TableTop benefits from two rollers that pull the stem into the de-stemmer to pop flowers off at an exceptional rate.

Features:

• Feed Types: Wet/Dry
• Feed Entry Sizes: 2-hole (1/4", 3/8")
• Feed Throughput: +75 lbs/hr (Wet) | +15 lbs/hr (Dry)
• Roller Sets: Neoprene Rubber
• Reverse Operation: No
• Duty Cycle: Continuous
• Pull Speed: 10-30 in/s
• Pull Strength: > >300 lbs
• GMP Compliant: Yes
• UL Compliant: Yes
• CE Compliant: Yes
• RoHS Compliant: Yes
• Primary Material: 304 Stainless Steel / Aluminum

Specifications:

• Input Voltage: NA: 120V, 60Hz Single Phase
• EU, AUS: 240V, 50Hz Single Phase
• Current Draw: NA: <3A Operating
• EU, AUS: <1.5A Operating
• Drive Motor: 0.33HP, IP54 | 1690 RPM
• Variable Speed: Control Yes
• Weight: 50lbs / 23kg
• Length: 18in / 46cm
• Width: 15in / 38cm
• Height: 17in / 43cm
• Circuit Breaker Required: NA: 15A/120V
• EU, AUS: 15A/220V

Additional Requirements

Extension Cord 14 AWG (min AWG SIZE) 7.6m/25ft MAX LENGTH

>Dry Bucking Tips

Best practices when bucking dry flower

Moisture Content

The moisture content of your cannabis is critical to minimize flower damage. If it is too dry, flower may fall apart when bucked. If it is too wet, buds may compact degrading trichomes.

To achieve optimal results when bucking, the moisture content of flower should be between 12% and 14%.

Desired Dankness

For peak bucking performance, buds should be “springy” and return to their original shape when squeezed. Manual bucking can be done when the big stems are still pliable, but the smaller stems snap when bent.

When harnessing a CenturionPro GC or HP bucker, the smaller stems must be pliable as well. This ensures they fold and can be comprehensively stripped upon entering the bucking machine. If stems are brittle, they will simply break off and may not be properly cleared.

Machine Speed

When bucking dry flower decreasing the machine's speed often produces better results, which is why the variable speed control on CenturionPro's HP buckers is so beneficial. Reducing the motor tempo to half of its regular speed can ensure stems are totally stripped and mitigate bud damage.

Dry Bucking 101

Establishing the Environment

• Ensure adequate space
• Review electrical requirements
• Have adequate bins for product transport
• Cooler temperatures in processing room is beneficial

Preparing the Plant

• Cut main stalk
• Separate each individual stem, leaving no shoots attached
• Leave enough stem to provide machine clearance
• Ensure clean angled cuts for precise feeding

Feeding the Machine

• Supply stems bottom first into the bucker
• Feed the stem into the closest fitting hole
• Use the variable speed controller to adjust flow
• Keep stems flower side up where possible

*ADDITIONAL COMPONENTS PICTURED ARE SOLD SEPARATELY

NOTE: Any missing or damaged items must be reported within 7 days of receiving shipment. Once machinery/parts are opened and/or used they are no longer eligible for refund or exchange. Customers can only return if written notice of return or a RMA# (Return Material Authorization Number) has been provided by CenturionPro Solutions within 7 days of receiving their machine and the machine or any component of which has not been used. There will be a 20% restocking fee and the customer will be responsible for all shipping costs. Returns must be packaged the same as they arrived and Centurion Pro is not liable for any shipping damage incurred on return. If damage occurs in transit on return, CenturionPro will refuse the return and customer will need to process a claim with their shipping provider. All unauthorized returns will be rejected by Centurion Pro and returned to the shipper at sender's expense. As a courtesy, BGH may assist with warranty claims and repairs by acting as a liaison between the customer and the manufacturer.

*free shipping excludes some remote parts of Hawaii and Alaska; contact us for more details

Brand	Centurion
Part Number	CP-16000
Length	18 in
Width	15 in
Height	17 in
Product Weight	50.0 lb
Actual Product Weight
Warranty	Yes