The Octa-Bubbler flow control device allows you to change the gallons per hour on your Octa-Bubbler without replacing it. The flow control devices are color coded. Choose the red flow control device for 10 GPH and the green for 20 GPH. NOTE: you will need 8 of these (one for each outlet) to convert your existing Octa-Bubbler to a 20 GPH Octa-Bubbler.
The Octa-Bubbler is an eight-outlet, pressure compensating, low-flow irrigation device. Along with 8 flow-controlled swivel barbed outlets (acommodates 3/16" ID - 1/4" OD drip tubing), it has a 1/2” FPT inlet thread base for installation on standard risers, and a backflow prevention device for added protection.
The Octa-Bubbler® is ideal for converting sprinkler systems to low flow, because it is designed to apply the amount of water the plants need during the time the sprinkler zone operates.
Primary Application: Designed for tree, shrub, flower and ground cover planting beds. This bubbler can be placed on spray head zones. Water is applied in the right quantity where needed with no waste.
The Pressure Compensating Diaphragm will deliver relatively uniform distribution of water across a wide pressure range of 20 PSI to 60 PSI.
|Dimensional/Billable Weight (lbs)||0.05|
|Actual Product Weight||0.05|
|Vendor Item #||708192|
|Manufacturer's Suggested Retail Price||$0.65|