Fluence Integrated Dimmer

If you need help figuring out what parts to purchase, or you need help wiring multiple fixtures please contact us - we're Fluence experts and we're here to help!

Download FLEX Cable and standard wiring diagrams here -> Complete Fluence Dimming & FLEX Cable Guide w/Diagrams

This simple dimmer module plugs directly into the M12 dimmer port on your Fluence power supply (ballast).

If you have an M16 push lock port on your power supply (see Connector Legend below) then you will need to add a Fluence Dimming Adapter - M16 Push-Lock to M12 Threaded to your order (see Related Items). 

If you have an M16 twist lock port on your power supply (see Connector Legend below) then you will need to add both a Fluence FLEX Adapter Gen1/Gen2 and a Fluence Dimming Adapter - M16 Push-Lock to M12 Threaded (see Related Items).

The Fluence Integrated Dimmer offers dimming from 0-100% in 10% increments, simply turn the knob to the desired output level. Please note that depending on the fixture, the lowest setting (where the light turns off) can be anywhere from 10% to 25%.

Please note: This dimmer is meant to control the overall light intensity of your Fluence Bioengineering fixture(s). It is not meant to act as a timer to control photoperiod. Please use a switch or timer to power fixtures on/off for photoperiod control.

Plug type: M12 metal threaded

Connector Legend:

• M12 - Latest connector type, found on the SPYDR FANG and most new SPYDR 2, VYPR 3 and RAZRm fixtures
• M16 Push Lock - Predecessor of the M12, this connector type was used on all SPYDR 2 and VYPR 2 fixtures prior to the M12 introduction
• M16 Twist Lock - This connector is used on most SPYDRx and VYPRx fixtures, and all RAZRx and RAY fixtures
• 3.5mm Jack - This connector was used on some the oldest first generation SPYDRx and VYPRx fixtures

If you need any help determining which Fluence cords or accessories you need please contact us and we'll be happy to help!