Fluence FLEX T-Connector Cable - 5' (M16)
Please read before adding this item to your cart. If you need help figuring out which Fluence parts to purchase and/or you are not 100% certain you are ordering the correct items, please contact us before making your purchase - we're Fluence experts and we're here to help! If you order the incorrect Fluence parts they may be subject to a restocking fee if returned.
Complete Fluence Dimming & FLEX Cable Guide w/Diagrams
One T-Connector is required for every light in a series. Use a 5' cable if fixtures are mounted less than 5' apart, or a 10' cable for greater spacing. Use a 20' 4-output cable to connect 4 fixtures in a series that will be mounted less than 5' apart (more affordable than purchasing (4) individual 5' cables).
NOTE: This cable uses an M16 (push-lock) plug; if your power supply uses an M12 (metal screw-on type) then you will need to use an M12 FLEX cable or an M16 to M12 adapter.
Compatible with all Fluence Gen 2 fixtures: SPYDR 2x, SPYDR 2p, SPYDR 2i, VYPR 2x, VYPR 2p
To use with a Gen 1 fixture (SPYDRx, SPYDRx PLUS, RAZR or RAY) you must use a Fluence Dimming Threaded Cable Adapter (Fluence part #71370) and use in conjunction with the Dimming Signal Cable that came with your fixture (also available for purchase separately).
Fluence part #: CDMA-71388
- $42.00 each and save 10%
Complete Fluence Dimming & FLEX Cable Guide w/Diagrams
One T-Connector is required for every light in a series. Use a 5' cable if fixtures are mounted less than 5' apart, or a 10' cable for greater spacing. Use a 20' 4-output cable to connect 4 fixtures in a series that will be mounted less than 5' apart (more affordable than purchasing (4) individual 5' cables).
Compatible with all Fluence Gen 2 fixtures:
- SPYDR 2x
- SPYDR 2p
- SPYDR 2i
- VYPR 2x
- VYPR 2p
NOTE: This cable uses an M16 (push-lock) plug; if your power supply uses an M12 (metal screw-on type) then you will need to use an M12 FLEX cable or an M16 to M12 adapter.
To use with a Gen 1 fixture (SPYDRx, SPYDRx PLUS, RAZR or RAY) you must use a Fluence Dimming Threaded Cable Adapter (Fluence part #71370) and use in conjunction with the Dimming Signal Cable that came with your fixture (also available for purchase separately).
Fluence part #: CDMA-71388
DC FLEX DIMMING CABLE SYSTEM:
These cables provide a low-cost solution to connect multiple power supplies for dimming. When grouped, independent dimming control zones are formed, organized, and isolated in case of problematic environmental factors.
FEATURES AND BENEFITS
- Plug-and-play “T” cables and cable extensions with matching connectors. No wire cutting or stripping is needed, reducing installation time and cost.
- Multiple cable length options are available to create dimming zones with various configurations.
- IP 65 rating ensures full protection from environmental factors from lighting control panel to dimming ports on power supplies.
- 100% compatible for all Fluence products with either pushlock or threaded connectors.
- Ground shield ensures maximum electrical performance for low voltage dimming signals.
Connector Legend:
- M12 - Latest connector type, found on most new SPYDR 2, FANG, VYPR 3 and RAZRm fixtures
- M16 Push Lock - Predecessor of the M12, this connector type was used on all SPYDR 2 and VYPR 2 fixtures prior to the M12 introduction
- M16 Twist Lock - This connector is used on most SPYDRx and VYPRx fixtures, and all RAZRx and RAY fixtures
- 3.5mm Jack - This connector was used on some the oldest first generation SPYDRx and VYPRx fixtures
If you need any help determining which Fluence cords or accessories you need please contact us and we'll be happy to help!
| SKU | 13217 |
|---|---|
| Manufacturer's Suggested Retail Price | $61.25 |
| Dimensional/Billable Weight (lbs) | 0.50 |
| Length (in.) | 12 |
| Width (in.) | 6 |
| Height (in.) | 6 |
| Lead Time | Normally ships in 14-28 days |
| Brand | Fluence Bioengineering |
| Vendor Item # | CDMA-71369 |
| Manufacturer Warranty | Yes |