Ideal Air

Ideal Air Conditioners, Dehumidifiers and Ducting Accessories for Grow Rooms

Items 1 to 20 of 150 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Humidifier - Commercial Grade - 75 Pints

    This excellent quality humidifier features a multi-directional fogging head. Measures 12.2" tall x 12.2" in diameter. Coverage is from 160-320 sq ft, depending on humidification requirements and ceiling height. Maximum output is 0.4 gallons per hour. Industrial-grade motor for years of use. Connects directly to your water supply with your own hookup (uses 1/4" tubing). Operates at 62 dBA. 110 volts/60 hz/.9 amps. 1 year manufacturer's warranty. Consider using a Titan Controls EOS 1 with this product!

    PRO TIP: Consider using an RO system along with a DI (De-Ionization) post filter to produce the water used to supply your humidifier. Tap water is high in salts (PPM's), and RO water is typically 20-60 PPM. Even a small amount of dissolved solids in your humidifier water can eventually lead to a white salt buildup that accumulates on the humidifier and the surrounding area, including your plants, the walls, grow room equipment, and worst of all, air conditioner and dehumidifier pre-filters. 

    Learn More
  • Ideal-Air Mini Split Heat Pump 36,000 BTU 15 SEER - DIY

    DESIGNED FOR HEATING/COOLING WITH OUTSIDE TEMPERATURES RANGING FROM 5º TO 105º F.
    USE OF UNIT OUTSIDE OF THESE TEMPERATURE RANGES IS NOT RECOMMENDED.
    IMPROPER USAGE RELATING TO OUTSIDE TEMPERATURE IS NOT COVERED UNDER WARRANTY.

     

    • Can be used with the optional programmable thermostat with up to 4 temperature settings each day. (see related products)
    • Flexible stainless steel pre-charged 23' line set with quick connect fittings allows for easy Do It Yourself installation.  No technician required.
    • High energy efficiency performance: 15 SEER using advanced DC inverter compressor.
    • Mini-Split inverter technology offers up to 30% savings.
    • Auto restart after power failure.
    • Ambient air temperature and individual room conditions will affect performance.
    • Must have a dedicated power circuit.
    • One year manufacturer warranty.
    12,000 BTU Unit
    Amp Range: 2 to 14 amps.
    dB Rating: Indoor 32 dB, Outdoor 45 dB.
    Requires 120 volt dedicated 15 amp circuit.

    24,000 BTU Unit
    Amp Range: 6 to 14 amps.
    dB Rating: Indoor 35 dB, Outdoor 45 dB.
    Requires 240 volt dedicated 15 amp circuit.

    36,000 BTU Unit
    Amp Range: 8 to 20 amps.
    dB Rating: Indoor 42 dB, Outdoor 52 dB.
    Requires 240 volt dedicated 20 amp circuit.

    Note:  All Ideal-Air Heat Pumps need surge protection and a dedicated power circuit. In the event of a power failure, a spike in power may occur when the power is reinstated. This can damage the circuit board which is not covered under warranty.


    Learn More
  • Equipment Pad 16 x 36 (Foam & Cement) for Mini Split Systems

    A foam and cement equipment pad that is 2 in thick. The equipment pads are a base for the outdoor mini split air conditioner or heat pump unit to sit on. The industry standard used across a variety of applications. Learn More
  • Ideal-Air ReFlex Line Set 3/8 X 5/8 X 15 ft Insulated w/ Interconnecting wire

    ReFlex® line sets are used to simplify installation of HVAC split system equipment. By connecting the indoor evaporator along with the outdoor condensing unit, this system allows an easy installation with out the headache of kinking copper tubing and saves on install time and labor. The ReFlex® line set comes pre-wired, pre-insulated and also comes with flare fitting on both ends, with an ETL listing for 800 PSI pressure test. 700586 & 700588 can be used with these Pro Series parts 700480, 700482, 700476 & 700478. 700571 & 700583 can be used with these Mega-Split™ parts 700498 & 700499. Learn More
  • Ideal-Air DriFecta 5 Ton Packaged Commercial Two stage Gas/Electric Air Conditioner, 120 MBH input, 208/230V 3Ph 60Hz

    DriFecta® Plus Gas/Electric is not only a commercial grade air conditioner, but also allows for independent humidity control. Temperature and humidity can have independent set points. Even if temperature set point is achieved, it will continue to operate the dehumidification feature until the desired humidity level is achieved. DriFecta® units are available in 3, 4, 5, 7.5 & 10 ton standard. Also available up to 25 ton, upon request. DriFecta® units are designed for roof mounting on a curb (14 in curb sold separately) they can also be slab-mounted at ground level. DriFecta® units are an all in one unit which eliminates the need for an indoor A/C and a standalone dehumidifier. Every unit is completely charged, wired and only 1 electrical circuit is required. They are piped and tested at the factory to provide for quick and easy field installation. All models are convertible between bottom and horizontal duct connections. DriFecta® Gas/Electric units are also available in the following configuration: cooling with single stage gas heat. Field installed low ambient cooling parts 700090 are required for running cooling when outdoor temperatures are below 0 degrees Fahrenheit. Factory installed Phase monitors protects the DriFecta® motor and PCB from expensive electrical damage. Ideal-Air™ DriFecta® is a Commercial Packaged, 13.0 SEER, R-410A Air Conditioner with Natural gas heat, and a standard dehumidification feature. The 3 HP belt drive blower and 2 inch throwaway filters are included. The units are all 208/230V 3ph 60Hz. 1 year parts warranty, 5 year limited compressor warranty, when installed by certified HVAC contractor, Drop ship only. Freight not included. All units require a certified HVAC-Professional for proper start up. Learn More
  • Duct Reducer 12in - 8in

    Got an 8" exhaust fan but the ducting coming off of your air-cooled hood is only 6"? No problem! These galvanized duct adapters can be used with fans, ducting, air-cooled hoods, ventilation systems, and whatever else you can think of to make your life easier.

    Our heavy-duty Duct Reducers are made of a thick gauge galvanized steel. We have improved the design for easier use and more secure duct connections. We offer a variety of sizes for all your HVAC and ducting needs.

    Learn More
  • Mini Split Line Set - 1/4 in x 5/8 in - 50 ft for 2 and 3 Ton Single Zone

    Line sets and interconnecting wires for Mini Split Systems. These parts are required for a Mini Split installation. Look to the description to match the correct part for your Mini Split. All parts contain 25 ft of 14 GA/3 conductor wire x 25 ft 16 GA/2 conductor wire (shielded) in addition to the insulated copper refrigerant line. The tube diameters for both 700570 and 700574 are 1/4 in and 3/8 in. The tube diameters for both 700572 and 700576 are 1/4 in and 5/8 in. Tube diameters for both the 700566 and 700568 are 1/4 in and 1/2 in. Learn More
  • Ideal-Air Line Set 1-1/8 in x 3/8 in - 25 ft (Used for 701706)

    Ideal-Air™ Copper Line Set Reducer Coupling (1-1/8 inch to 7/8 inch) is exclusively for use with Ideal-Air™ Line Sets 700813 and 700814. This fitting is required for line set installation on the Ideal-Air™ 5 Ton Split System (701706). Purchase line sets separately - item 700813 or 700814. Learn More
  • Ideal-Air Pro-Dual 24,000 BTU 22 SEER Multi-Zone Heating & Cooling Outdoor Unit

    Ideal-Air™ Pro-Dual™ 24,000 BTU 22 Seer Multi-Zone Heating & Cooling Outdoor Unit. The Ideal-Air™ Pro-Dual™ Outdoor unit can me matched up with multiple indoor head configurations. These systems are designed to function with 1 single outdoor condensing unit with a minimum 2 indoor units up to 4 indoor heads maximum. (See Match up chart online at www.ideal-air.com, this will also be listed on the packaging of the box). 208-230V, 1ph, 60Hz, 25 Amps and 1970 watts. Outdoor ambient cooling operating temperature range -13°F to 122°F, outdoor ambient heating operating temperature range -13°F to 86°F. Line set size depends on the indoor wall mount or ceiling evaporator head. Learn More
  • Ideal-Air Electric Heat Strip with Out Circuit Breaker 5 kW 208 / 230 Volt

    Ideal-Air™ 5 Ton 14 SEER Split Complete System Air Conditioner Package. This system features internal compressor protection and includes a factory installed filter drier to keep the refrigerant clean and dry on the outdoor unit for years of use. The single piece, 24.5 inch wide multi-position air handler is fully insulated to reduce noise and prevent sweating and includes a horizontal condensate drain pan. Included indoor evaporator coils are “compatibility engineered” and an ECM Motor (X13) motor standard for efficiency. The blower delivers 2000 CFM to accommodate large duct work and a matched TX valve is included with every system to ensure maximum efficiency. If extra heat is desired, back-up electric heat is also available (Strip heaters are optional and sold separately). All systems are 208/230 volt, 1 phase, 60Hz. As always R410A environmentally friendly refrigerant. A 10 year compressor and 1 year all other parts warranty is standard when registered and serviced. Learn More
  • Ideal-Air Mini Split Heat Pump 12,000 BTU 15 SEER - DIY

    DESIGNED FOR HEATING/COOLING WITH OUTSIDE TEMPERATURES RANGING FROM 5º TO 105º F.
    USE OF UNIT OUTSIDE OF THESE TEMPERATURE RANGES IS NOT RECOMMENDED.
    IMPROPER USAGE RELATING TO OUTSIDE TEMPERATURE IS NOT COVERED UNDER WARRANTY.

    • Can be used with the optional programmable thermostat with up to 4 temperature settings each day. (see related products)
    • Flexible stainless steel pre-charged 23' line set with quick connect fittings allows for easy Do It Yourself installation.  No technician required.
    • High energy efficiency performance: 15 SEER using advanced DC inverter compressor.
    • Mini-Split inverter technology offers up to 30% savings.
    • Auto restart after power failure.
    • Ambient air temperature and individual room conditions will affect performance.
    • Must have a dedicated power circuit.
    • One year manufacturer warranty.
    Learn More
  • Ideal-Air Dual Hose Air Conditioner 12,000 BTU

    High performance flexible dual hose design. One hose is condenser intake and the other is condenser hot air discharge. Auto restart function. Digital control panel with remote control thermostat. Removable filter. Heavy duty compressor with 3-speed fan motor. Slinger up, no bucket self evaporative condensation removal system: Slinger up removal system helps to reduce the need for external drainage as condensate water is used in the cooling process. Condensate water is expelled as a fine mist through the hot air exhaust hose. Accessories included: 2 flexible duct hoses (5 ft each), 2-piece adjustable window insert, 1 foam window insert seal and 4 duct & hose fittings. Supply voltage: 115 Volt - 60 Hz. Power: 11.8 Amps/1355 Watts. Learn More
  • Ideal-Air ReFlex Line Set 3/4 in x 1/2 in x 15 ft Insulated w/ Interconnecting Wire

    ReFlex® line sets are used to simplify installation of HVAC split system equipment. By connecting the indoor evaporator along with the outdoor condensing unit, this system allows an easy installation with out the headache of kinking copper tubing and saves on install time and labor. The ReFlex® line set comes pre-wired, pre-insulated and also comes with flare fitting on both ends, with an ETL listing for 800 PSI pressure test. 700586 & 700588 can be used with these Pro Series parts 700480, 700482, 700476 & 700478. 700571 & 700583 can be used with these Mega-Split™ parts 700498 & 700499. Learn More
  • Ideal-Air DriFecta 4 Ton Packaged Commercial Two stage Gas/Electric Air Conditioner, 80 MBH input, 208/230V 3Ph 60Hz

    DriFecta® Plus Gas/Electric is not only a commercial grade air conditioner, but also allows for independent humidity control. Temperature and humidity can have independent set points. Even if temperature set point is achieved, it will continue to operate the dehumidification feature until the desired humidity level is achieved. DriFecta® units are available in 3, 4, 5, 7.5 & 10 ton standard. Also available up to 25 ton, upon request. DriFecta® units are designed for roof mounting on a curb (14 in curb sold separately) they can also be slab-mounted at ground level. DriFecta® units are an all in one unit which eliminates the need for an indoor A/C and a standalone dehumidifier. Every unit is completely charged, wired and only 1 electrical circuit is required. They are piped and tested at the factory to provide for quick and easy field installation. All models are convertible between bottom and horizontal duct connections. DriFecta® Gas/Electric units are also available in the following configuration: cooling with single stage gas heat. Field installed low ambient cooling parts 700090 are required for running cooling when outdoor temperatures are below 0 degrees Fahrenheit. Factory installed Phase monitors protects the DriFecta® motor and PCB from expensive electrical damage. Ideal-Air™ DriFecta® is a Commercial Packaged, 13.0 SEER, R-410A Air Conditioner with Natural gas heat, and a standard dehumidification feature. The 3 HP belt drive blower and 2 inch throwaway filters are included. The units are all 208/230V 3ph 60Hz. 1 year parts warranty, 5 year limited compressor warranty, when installed by certified HVAC contractor, Drop ship only. Freight not included. All units require a certified HVAC-Professional for proper start up. Learn More
  • Duct Wye Branch 12in x 10in x 10in

    Need to cool two separate air-cooled lights or grow rooms with the same exhaust fan? No problem! These galvanized duct adapters can be used with fans, ducting, air-cooled hoods, ventilation systems, and whatever else you can think of to make your life easier.
    Learn More
  • Ideal-Air Remote Thermostat Cable for LuxPro Thermostat

    The Ideal-Air™ remote thermostat cable must be used for proper installation when installing the LuxPro Thermostat in conjunction with Ideal-Air™ Mini Split DIY units #700500, #700505 & #700510. Length 20 ft, 4 conductor, 24 AWG with molded plug for connection to indoor unit.

    Learn More
  • Ideal-Air HVAC Compound Pressure-Vacuum Gauge and Hose Set

    This product includes a single valve with an R410A compound gauge showing both pressure and vacuum. The sturdy brass valve comes attached to the gauge, which is covered with a rubber, shock resistant outer cover. Also included are two 36 inch refrigerant hoses with 1/4 inch equipment connections. Learn More
  • Ideal-Air Pro-Dual 24,000 BTU Multi-Zone Heating & Cooling Ceiling Mount Cassette

    Ideal-Air™ Pro-Dual™ 24,000 BTU Multi-Zone Heating & Cooling Ceiling Mount Cassette with grill. The Ideal-Air™ Pro-Dual™ Indoor Head unit can me matched up with multiple different configuration with 1 single outdoor condensing unit. (See Match up chart online at www.ideal-air.com, this will also be listed on the packaging of the box). 208-230V, 60Hz, 1ph, 3 speed fan, 43 dB sound rating, 17.5 Amps and 42 watts. Line set connection 3/8 x 5/8 inch. Learn More
  • Ideal-Air Electric Heat Strip with Circuit Breaker 20 kW 208 / 230 Volt

    Ideal-Air™ 5 Ton 14 SEER Split Complete System Air Conditioner Package. This system features internal compressor protection and includes a factory installed filter drier to keep the refrigerant clean and dry on the outdoor unit for years of use. The single piece, 24.5 inch wide multi-position air handler is fully insulated to reduce noise and prevent sweating and includes a horizontal condensate drain pan. Included indoor evaporator coils are “compatibility engineered” and an ECM Motor (X13) motor standard for efficiency. The blower delivers 2000 CFM to accommodate large duct work and a matched TX valve is included with every system to ensure maximum efficiency. If extra heat is desired, back-up electric heat is also available (Strip heaters are optional and sold separately). All systems are 208/230 volt, 1 phase, 60Hz. As always R410A environmentally friendly refrigerant. A 10 year compressor and 1 year all other parts warranty is standard when registered and serviced. Learn More
  • Ideal-Air Dehumidifier 50 Pint

    Rated at 30, 50 & 70 pints per day at 86�F/80% RH. Quick maintenance with easy carbon filter access that is removable and washable. Low temperature defrosting. Easy to move with built in handles and wheels. Easy to use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. Can be plumbed for permanent drainage. 30 Pint is 4.0 Amps/420 Watts. 50 Pint is 4.7 Amps/520 Watts. 70 Pint is 6.9 Amps/720 Watts. Learn More

Items 1 to 20 of 150 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5