Double Ended Reflectors

18 Item(s)

per page

  • DE Boss Double Ended Reflector

    State-of-the-art, optically engineered for high performance based on proven, patented designs. Made specifically for double ended 1000 watt HPS horticultural lamps (not included). Unique double ended construction allows for maximum optical efficiency and uniformity. Full spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/Lumen maintenance (up to 90% PAR at 10,000 hours of operation). Deep reflector design holds the lamp heat to keep the DE lamp at optimal operating temperature. 95% reflective textured German aluminum interior with 98% reflective corner inserts offer unsurpassed uniformity, output and diffusion. Galvanized steel housing with durable powder coated finish. Detachable 15 ft lamp cord at the reflector and at ballast. Learn More
  • AC/DE Air-Cooled Double Ended Reflector 8"

    Don't buy an air-cooled double-ended reflector until you read this!

    The AC/DE is the best air-cooled DE reflector available - period. Other air-cooled DE reflectors allow the air to pass over the lamp or through the lamp compartment. While this does remove more heat, it also has a negative impact on the quality and spectrum of light produced by the lamp. This is due to the fact that DE lamps use quartz instead of borosilicate glass, which offers less insulation to the inner arc tube. DE lamps are designed to operate at a very high temperature. While other air-cooled reflectors cool the lamp and take away from the light, the AC/DE positions the lamp deep into the top of the hood, keeping the lamp at the temperature the lamp was designed to run at.

    Learn More
  • AC/DE 8 in Replacement Glass Frame

    All reflector replacement glass frames are made to the same exacting standards as your original reflector glass frame. White powder coated frame with the glass sealed in with neoprene. Match the glass frame that goes with your reflector. Includes frame and tempered glass. Learn More
  • Agrotech Magnum Double Ended Reflector

    Not only is this double ended reflector affordable, it's our favorite choice for installations in rooms with standard 8' ceilings. In a typical setup with two lights over a 4' x 8' area, you will find that the light directly underneath the lamp is too strong for the plants, often causing the leaves to yellow, while the light around perimeter of the area isn't strong enough. What's great about this reflector is that it is so wide, it covers the long edges of the area very well. Instead of positioning the reflectors in the center of each 4' x 4' square we recommend that you push them away from each other, so that they are almost at the edges of the 8' area. This is due to the fact that the DE lamp produces so much plant-usable light that instead the "hot spot" forming underneath the lamps, it actually forms directly between the two reflectors. When you spread them out you do two things. First, you increase the amount of light available at the ends of the 8' area. Second, the hot spot between the two lights is eliminated. We've actually setup test rooms with 4' x 8' trays and two lights above each tray. They we walked the length of the trays with our PAR meter to test the actual peaks and valleys in the light throw. The tray with the Agrotech Magnum reflectors actually produced the most even light spread we've ever seen. In addition, the most common feedback we get from customers using these reflectors is that they never have to turn the lights up past 750 watts, yet they achieve better results than their old 1000 watt single ended systems. Better yields and a 25% savings in electricity - an absolute win/win situation. This reflector is very lightweight and ships unassembled, which means that although it is a very large reflector, it's less expensive to ship than most of the other reflectors we offer.

    Learn More
  • Adjust-A-Wing Avenger DE Reflector

    Made specifically for double ended 1000W HPS horticulture lamps (not included). 95% reflective proprietary textured German aluminum. Unique double ended constructions allows doe maximum optical efficiency and uniformity. Full spectrum DE Lamps used in the fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/lumen maintenance (up to 90% PAR at 10,000 hrs of operation).

    Socket and lamp cord included.

    Reflector Dimensions: 27.6"L x 39.5 to 34.5"W - Height varies by width.

    Learn More
  • Blazer DE Reflector

    The shape of the Blazer� DE Reflector is perfect for square growing areas. Highly reflective aluminum offers excellent output, reflectivity and diffusion. Made specifically for double-ended horticulture lamps (not included). German made, UL listed double-ended sockets. Unique double-ended construction allows for maximum optical efficiency and uniformity. Improved spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/Lumen maintenance (up to 90% PAR at 10,000 hours of operation). Deep reflector design holds the lamp heat to keep the DE lamp at optimal operating temperature. Galvanized steel housing with durable powder-coated finish. Includes pre-wired sockets and 15 ft lamp cord. Learn More
  • Super Spreader for Adjust-A-Wings Large Double Ended

    Creates wider, more even light spread. Eliminates “hot spots” and “shady edges”. Allows closer light placement for increased power. Reduces heat at plant level by at least 9ºF. Increase your yields using less lights! Grow right through summer... No problem! New lightweight 95% reflective super alloy. Prismatic surface spreads light more evenly. Compatible with Large Adjust-A-Wings Double Ended Reflectors.

    Learn More
  • Flex DE Reflector

    The Flex DE Reflector is larger than most standard wing reflectors. Highly reflective aluminum offers excellent uniformity, output and diffusion. Patent pending enclosed end wing design for better control of the light footprint. Made specifically for double-ended horticultural lamps (not included). Features German made, UL listed double-ended sockets. Unique double-ended construction allows for maximum optical efficiency and uniformity. Improved spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/Lumen maintenance (up to 90% PAR at 10,000 hours of operation). Light weight and easy to hang. Comes completely assembled with prewired 15 ft lamp cord and sockets. Learn More
  • Dominator XXXL Double Ended Non AC Reflector

    State-of-the-art, optically engineered for high performance based on proven, patented designs. Made specifically for double ended 1000 watt HPS horticultural lamps (not included). Unique double ended construction allows for maximum optical efficiency and uniformity. Full spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/Lumen maintenance (up to 90% PAR at 10,000 hours of operation). Deep reflector design holds the lamp heat to keep the DE lamp at optimal operating temperature. 95% reflective textured German aluminum interior with 98% reflective corner inserts offer unsurpassed uniformity, output and diffusion. Galvanized steel housing with durable powder coated finish. Detachable 15 ft lamp cord at the reflector and at ballast. Learn More
  • Silver Sun DE Reflector

    The Silver Sun® DE by Sun System® is a large traditional multi-leaf parabolic hood design that delivers broad coverage using the double-ended platform (not included). Features German made, UL listed double-ended sockets. Unique double-ended construction allows for maximum optical efficiency and uniformity. Improved spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/Lumen maintenance (up to 90% PAR at 10,000 hours of operation). Deep reflector design holds the lamp heat to keep the DE lamp at optimal operating temperature. Made from highly reflective aluminum. Large size provides for a large coverage area even when placed close to plants. V-strike bend above lamp to increase performance. Comes unassembled and easily sets up in minutes. Pre-wired with 15 ft lamp cord and socket. Learn More
  • Gavita HortiStar 1000 Double Ended (DE) Reflector

    • HortiStar 1000 Double Ended has a replaceable Miro aluminum reflector with 96% efficiency.
    • Specifically designed for high frequency electronic ballasts it has a connection at each side of the lamp, removing the need for a frame wire inside the lamp. For double ended 1000 watt lamps.
    • The lamp cord terminal is shielded by a metal housing. Comes with 13' lamp cord.
    • Installation is very easy with two eye bolts.
    • Lamp not included.
    • Reflector dimensions: 20.1" long x 9.6" wide x 7.6" high.

    Learn More
  • Gavita HortiStar 96 1000 DE Reflector Replacement

    • HortiStar 1000 Double Ended has a replaceable Miro aluminum reflector with 96% efficiency.
    • Specifically designed for high frequency electronic ballasts it has a connection at each side of the lamp, removing the need for a frame wire inside the lamp. For double ended 1000 watt lamps.
    • The lamp cord terminal is shielded by a metal housing. Comes with 13' lamp cord.
    • Installation is very easy with two eye bolts.
    • Lamp not included.
    • Reflector dimensions: 20.1" long x 9.6" wide x 7.6" high.

    Learn More
  • Gavita HortiStar HR 96 600 SE Reflector Replacement

    The reflector is one of the key elements of a successful fixture. You can have the best ballast and the best lamp, but without a good reflector you waste a lot of light, every day you use it. Keeping your reflectors in optimal condition is a must for good results. These are replacement reflector inserts for the Gavita HortiStar reflector (#906015). Reflector replacement only; does not include fixture, etc.

    Learn More
  • Gavita Pro Wide 150° DE Reflector

    Replacement reflector for Gavita Pro line and HortiStar. Easy to install, no tools required. Wide spread for optimal uniformity (150° beam angle). Suitable for double-ended 750-1000W HPS. This reflector is most suitable for overlapping plans. Designed for uniformity. Made from MIRO® aluminum.

    Learn More
  • Gavita M110 DE SR Reflector

    This replacement reflector for the Gavita Pro line and HortiStar requires no tools to install. The medium spread of this reflector with 110° beam angle is great for tents and small rooms. This is Gavita's most suitable reflector for single light set ups. The 110° is designed for uniformity and deep crop penetration in 1-2 fixture configurations. Suitable for double ended 750-1000W HPS. Learn More
  • Gavita TripleStar 600 Reflector

    Rugged, compact design that is adjustable to 3 different positions: Wide, medium and deep.

    For every position the efficiency is better than 90%.

    The three Miro Aluminum reflector plates are replaceable.

    We recommend changing the reflector plates every year.

    In set-ups with multiple reflectors you can adjust them asymmetrically.

    Suitable for MH or HPS lamps ranging from 400 - 750 watts.

    The lamp cord terminal is shielded by a metal housing.

    13' lamp cord included.

    Reflector dimensions: 18.3" long x 9.8" wide x 5.5" high.

    Learn More
  • Gavita Triplestar 600 Inlay Reflector Kit

    The reflector is one of the key elements of a successful fixture. You can have the best ballast and the best lamp, but without a good reflector you waste a lot of light, every day you use it. Keeping your reflectors in optimal condition is a must for good results. These are replacement reflector inserts for the Gavita Triplestar reflector (#906005). Learn More
  • Gavita HortiStar 600 SE Reflector

    HortiStar 600 SE has a replaceable Miro aluminum reflector with 96% efficiency.

    This fixture is suitable for HPS and MH lamps 600 watt to 750 watts.

    The lamp cord terminal is shielded by a metal housing.

    Installation is very easy with two eye bolts.

    Comes with 13' lamp cord.

    Reflector dimensions: 20.1" long x 9.6" wide x 7.6" high.

    Learn More

18 Item(s)

per page