{"title":"LED Grow Light Fixtures","description":"","products":[{"product_id":"fluence-ray22-led-grow-light-bar","title":"Fluence RAY22 LED Grow Light Bar","description":"\u003cp\u003eRAY22 is available in six spectral options in a slim form factor just 22” long for tight grow environments. Like its longer cousins, RAY22 is well-suited for research, vertical farms, side-canopy and intracanopy use.\u003c\/p\u003e\n\u003cp\u003eThe Fluence RAY LED grow light bar is available in three sizes: 22″, 44″ and 66″, and it is available with six different spectral compositions for full-cycle growth and supplemental photomorphogenic response. The Fluence RAY comes with a 120-degree beam angle for close-proximity cultivation, which minimizes the amount of light on the floor, thus maximizes your growth rate and your ROI.\u003c\/p\u003e\n\u003cp\u003eThe LED grow light bars are UL-rated for damp locations and are 0-10V dimmable, so you can achieve the amount of PAR your plants need at each stage of their lifecycle. Each fixture comes with the power supply and everything you need to immediately use the lighting system over your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Greenhouse\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to PhysioSpec Indoor, \u003cstrong\u003ePhysioSpec Greenhouse\u003c\/strong\u003e is enriched with a higher amount of blue photons in the 400-500nm range, which are used to offset plant stretch induced by the sun’s far red radiation. As an added bonus, PhysioSpec Greenhouse offers a world-class work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnthoSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith dual-peak spectrum at 450nm and 660nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eAntho\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSpec is designed to provide rapid anthocyanin accumulation in plant tissue (i.e. purple lettuce coloration). Based on the latest academic research, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eAntho\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSpec is the most efficient spectrum for increasing anthocyanin production in plants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUVSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith a peak wavelength of 400nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eUVSpec\u003c\/span\u003e\u003cspan class=\"s1\"\u003e™ is designed to provide beneficial photomorphogenic responses by creating a mild stress response in plants. When applied incorrectly, research shows UV stress causes photoinhibition of chloroplasts, resulting in lower biomass production, photobleaching and death of leaves. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a peak spectrum at 660nm, PrSpec™ is designed to exclusively target phytochrome red photoreceptors. This spectrum is widely used to target Phytochrome Red (Pr) in photomorphogenic lighting applications, and it is used to delay flowering in short-day plants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePfrSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith a peak spectrum at 730nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003ePfrSpec\u003c\/span\u003e\u003cspan class=\"s1\"\u003e™ is designed to exclusively target phytochrome far red photoreceptors. This spectrum is widely used to target Phytochrome Far Red (Pfr) in photomorphogenic lighting applications, and it is used to lengthen the dark period to encourage the flowering process in Short Day Plants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: see below\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): see below\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): see below\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 1 lb\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor, PhysioSpec Greenhouse, AnthoSpec, PrSpec, PfrSpec or UVSpec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePPF depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 95 μ\u003cspan class=\"s1\"\u003emol\/s\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 95 μ\u003cspan class=\"s1\"\u003emol\/s\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 95 μ\u003cspan class=\"s1\"\u003emol\/s\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 63 μmol\/s\u003c\/li\u003e\n\u003cli\u003ePrSpec: 100 μmol\/s\u003c\/li\u003e\n\u003cli\u003eUVSpec: 54 μmol\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower consumption depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 45W\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 45W\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 44W\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 36W\u003c\/li\u003e\n\u003cli\u003ePrSpec: 38W\u003c\/li\u003e\n\u003cli\u003eUVSpec: 38W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElectrical efficiency depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 2.1 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 2.1 μmol\/J\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 2.2 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 1.8 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePrSpec: 2.6 μmol\/J\u003c\/li\u003e\n\u003cli\u003eUVSpec: 1.4 μmol\/J\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInput voltage is 100-277v. Amperage depends on fixture wattage and input voltage. Below are general estimates. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor (45W) — Amps @ 120V: .4 A | Amps @ 208V: .2A | Amps @ 240V: .2A | Amps @ 277V: .2A\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse (45W) — Amps @ 120V: .4 A | Amps @ 208V: .2A | Amps @ 240V: .2A | Amps @ 277V: .2A\u003c\/li\u003e\n\u003cli\u003eAnthoSpec (45W) — Amps @ 120V: .4 A | Amps @ 208V: .2A | Amps @ 240V: .2A | Amps @ 277V: .2A\u003c\/li\u003e\n\u003cli\u003ePrSpec (35W) — Amps @ 120V: .3A | Amps @ 208V: .2A | Amps@ 240V: .1A | Amps @ 277V: .1A\u003c\/li\u003e\n\u003cli\u003ePfrSpec (35W) — Amps @ 120V: .3A | Amps @ 208V: .2A | Amps@ 240V: .1A | Amps @ 277V: .1A\u003c\/li\u003e\n\u003cli\u003eUVSpec (45W) — Amps @ 120V: .4 A | Amps @ 208V: .2A | Amps @ 240V: .2A | Amps @ 277V: .2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll RAY LED's are guaranteed against manufacturing defects for three years with projected lifetime of 100,000 operating hours to 70 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879707942997,"sku":"9834","price":312.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-ray22-led-grow-light-bar-9834-3443562.png?v=1767477193"},{"product_id":"fluence-ray44-led-grow-light-bar","title":"Fluence RAY44 LED Grow Light Bar","description":"\u003cp\u003eAt 44″ long, our mid-length RAY44 offers six spectral choices and is perfect for side canopy lighting over a 4-foot area.\u003c\/p\u003e\n\u003cp\u003eThe Fluence RAY LED grow light bar is available in three sizes: 22″, 44″ and 66″, and it is available with six different spectral compositions for full-cycle growth and supplemental photomorphogenic response. The Fluence RAY comes with a 120-degree beam angle for close-proximity cultivation, which minimizes the amount of light on the floor, thus maximizes your growth rate and your ROI.\u003c\/p\u003e\n\u003cp\u003eThe LED grow light bars are UL-rated for damp locations and are 0-10V dimmable, so you can achieve the amount of PAR your plants need at each stage of their lifecycle. Each fixture comes with the power supply and everything you need to immediately use the lighting system over your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Greenhouse\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to PhysioSpec Indoor, \u003cstrong\u003ePhysioSpec Greenhouse\u003c\/strong\u003e is enriched with a higher amount of blue photons in the 400-500nm range, which are used to offset plant stretch induced by the sun’s far red radiation. As an added bonus, PhysioSpec Greenhouse offers a world-class work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnthoSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith dual-peak spectrum at 450nm and 660nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eAntho\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSpec is designed to provide rapid anthocyanin accumulation in plant tissue (i.e. purple lettuce coloration). Based on the latest academic research, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eAntho\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSpec is the most efficient spectrum for increasing anthocyanin production in plants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUVSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith a peak wavelength of 400nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eUVSpec\u003c\/span\u003e\u003cspan class=\"s1\"\u003e™ is designed to provide beneficial photomorphogenic responses by creating a mild stress response in plants. When applied incorrectly, research shows UV stress causes photoinhibition of chloroplasts, resulting in lower biomass production, photobleaching and death of leaves. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a peak spectrum at 660nm, PrSpec™ is designed to exclusively target phytochrome red photoreceptors. This spectrum is widely used to target Phytochrome Red (Pr) in photomorphogenic lighting applications, and it is used to delay flowering in short-day plants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePfrSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith a peak spectrum at 730nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003ePfrSpec\u003c\/span\u003e\u003cspan class=\"s1\"\u003e™ is designed to exclusively target phytochrome far red photoreceptors. This spectrum is widely used to target Phytochrome Far Red (Pfr) in photomorphogenic lighting applications, and it is used to lengthen the dark period to encourage the flowering process in Short Day Plants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: see below\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): see below\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): see below\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 1 lb\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor, PhysioSpec Greenhouse, AnthoSpec, PrSpec, PfrSpec or UVSpec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePPF depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 190 μmol\/s\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 190 μmol\/s\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 190 μmol\/s\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 126 μmol\/s\u003c\/li\u003e\n\u003cli\u003ePrSpec: 200 μmol\/s\u003c\/li\u003e\n\u003cli\u003eUVSpec: 108 μmol\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower consumption depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 85W\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 85W\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 88W\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 72W\u003c\/li\u003e\n\u003cli\u003ePrSpec: 76W\u003c\/li\u003e\n\u003cli\u003eUVSpec: 76W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElectrical efficiency depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 2.2 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 2.2 μmol\/J\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 2.2 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 1.8 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePrSpec: 2.6 μmol\/J\u003c\/li\u003e\n\u003cli\u003eUVSpec: 1.4 μmol\/J\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInput voltage is 100-277v. Amperage depends on fixture wattage and input voltage. Below are general estimates. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor (85W) — Amps @ 120V: .7 A | Amps @ 208V: .4A | Amps @ 240V: .4A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse (85W) — Amps @ 120V: .7 A | Amps @ 208V: .4A | Amps @ 240V: .4A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003eAnthoSpec (85W) — Amps @ 120V: .7A | Amps @ 208V: .4A | Amps @ 240V: .4A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003ePrSpec (70W) — Amps @ 120V: .6A | Amps @ 208V: .3A | Amps @ 240V: .3A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003ePfrSpec (70W) — Amps @ 120V: .6A | Amps @ 208V: .3A | Amps @ 240V: .3A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003eUVSpec (85W) — Amps @ 120V: .7A | Amps @ 208V: .4A | Amps @ 240V: .4A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll RAY LED's are guaranteed against manufacturing defects for three years with projected lifetime of 100,000 operating hours to 70 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879707975765,"sku":"9835","price":372.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-ray44-led-grow-light-bar-9835-1849442.png?v=1767477190"},{"product_id":"grower-s-choice-x-tsl-hortitech-roi-e680-led-grow-light-120-240v","title":"Grower's Choice X TSL HortiTech ROI-e680 LED Grow Light 120-240v","description":"\u003cp\u003eIntroducing the Roi-E680 Horticulture LED System. An inspired collaboration between two of the most respected lighting companies in the horticulture industry. TSL Horti Tech and Grower’s Choice have joined forces with their years of innovative experience to create this high performance and cost-effective lighting solution for commercial horticulture.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cp\u003eBalanced spectrum, Incorporating Grower’s Choice famous 3K CMH Full Phase Spectrum for superior growing power with best possible LED diodes available.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.bghydro.com\/media\/catalog\/product\/r\/o\/roi-e680-1.JPG\" alt=\"\" width=\"500\" height=\"339\"\u003e\u003c\/p\u003e\n\u003ch4\u003eHigh Performance:\u003c\/h4\u003e\n\u003cp\u003e• 1700 μmol\/s Total Output\u003cbr\u003e• 2.5 μmol\/J System Efficacy\u003c\/p\u003e\n\u003ch4\u003eEnergy Saving and Easy HVAC:\u003c\/h4\u003e\n\u003cp\u003e• Up to 40% energy saving\u003cbr\u003e• 40% less HVAC requirement\u003c\/p\u003e\n\u003ch4\u003eTotal Control\u003c\/h4\u003e\n\u003cp\u003eWith onboard dimming function, growers can set the ideal intensity at any stage of plant growth for optimal photosynthesis activation. Also, it is compatible with most lighting controllers including Grower’s Choice Master Lighting controller.\u003c\/p\u003e\n\u003ch4\u003eEven Light Distribution\u003c\/h4\u003e\n\u003cp\u003ePrecisely designed to deliver uniform levels of photosynthetic photon flux density (PPFD)\u003c\/p\u003e\n\u003ch4\u003eQuality Components\u003c\/h4\u003e\n\u003cp\u003eIndustrial grade manufactured with Osram Top Bin Diodes and ultra-efficient driver\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source………………...LED\u003c\/li\u003e\n\u003cli\u003eSpectrum………………………GC-3K Full Phase\u003c\/li\u003e\n\u003cli\u003ePPF……………………………..….1700 μmol\/s\u003c\/li\u003e\n\u003cli\u003eInput Power……………………680Watts\u003c\/li\u003e\n\u003cli\u003eEfficacy…………………………..2.5 μmol\/s\u003c\/li\u003e\n\u003cli\u003eFixture \u0026amp; Dimensions……..42.4” L x 42” W x 2.4” H | 30lbs\u003c\/li\u003e\n\u003cli\u003eMounting height……………..≥6” (15.2cm) Above Canopy\u003c\/li\u003e\n\u003cli\u003eThermal Management……..Passive\u003c\/li\u003e\n\u003cli\u003eDimming………………………...0-10V\u003c\/li\u003e\n\u003cli\u003eLight Distribution……………..120°\u003c\/li\u003e\n\u003cli\u003eLife Time……………………….L90: \u0026gt;54,000 hrs\u003c\/li\u003e\n\u003cli\u003ePower Factory………………..\u0026gt;90%\u003c\/li\u003e\n\u003cli\u003eCertification…………………..IP65, ETL, CE\u003c\/li\u003e\n\u003cli\u003eWarranty…………………….. 3 Years Standard Warranty\u003c\/li\u003e\n\u003cli\u003e120v cord and 240v adaptor included in every box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.bghydro.com\/media\/catalog\/product\/r\/o\/roi-e680-2.JPG\" alt=\"\" width=\"686\" height=\"442\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e \u003c\/h4\u003e","brand":"Grower's Choice","offers":[{"title":"Default Title","offer_id":41879708106837,"sku":"12925","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/growers-choice-x-tsl-hortitech-roi-e680-led-grow-light-120-240v-12925-6636636.jpg?v=1767477189"},{"product_id":"grower-s-choice-x-tsl-hortitech-roi-e680-led-grow-light-277v","title":"Grower's Choice X TSL HortiTech ROI-e680 LED Grow Light 277V","description":"\u003cp\u003eThis is the Roi-E680 Fixture with a 277v plug type. \u003c\/p\u003e\n\u003cp\u003eIntroducing the Roi-E680 Horticulture LED System. An inspired collaboration between two of the most respected lighting companies in the horticulture industry. TSL Horti Tech and Grower’s Choice have joined forces with their years of innovative experience to create this high performance and cost-effective lighting solution for commercial horticulture.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cp\u003eBalanced spectrum, Incorporating Grower’s Choice famous 3K CMH Full Phase Spectrum for superior growing power with best possible LED diodes available.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.bghydro.com\/media\/catalog\/product\/r\/o\/roi-e680-1.JPG\" alt=\"\" width=\"500\" height=\"339\"\u003e\u003c\/p\u003e\n\u003ch4\u003eHigh Performance:\u003c\/h4\u003e\n\u003cp\u003e• 1700 μmol\/s Total Output\u003cbr\u003e• 2.5 μmol\/J System Efficacy\u003c\/p\u003e\n\u003ch4\u003eEnergy Saving and Easy HVAC:\u003c\/h4\u003e\n\u003cp\u003e• Up to 40% energy saving\u003cbr\u003e• 40% less HVAC requirement\u003c\/p\u003e\n\u003ch4\u003eTotal Control\u003c\/h4\u003e\n\u003cp\u003eWith onboard dimming function, growers can set the ideal intensity at any stage of plant growth for optimal photosynthesis activation. Also, it is compatible with most lighting controllers including Grower’s Choice Master Lighting controller.\u003c\/p\u003e\n\u003ch4\u003eEven Light Distribution\u003c\/h4\u003e\n\u003cp\u003ePrecisely designed to deliver uniform levels of photosynthetic photon flux density (PPFD)\u003c\/p\u003e\n\u003ch4\u003eQuality Components\u003c\/h4\u003e\n\u003cp\u003eIndustrial grade manufactured with Osram Top Bin Diodes and ultra-efficient driver\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source………………...LED\u003c\/li\u003e\n\u003cli\u003eSpectrum………………………GC-3K Full Phase\u003c\/li\u003e\n\u003cli\u003ePPF……………………………..….1700 μmol\/s\u003c\/li\u003e\n\u003cli\u003eInput Power……………………680Watts\u003c\/li\u003e\n\u003cli\u003eEfficacy…………………………..2.5 μmol\/s\u003c\/li\u003e\n\u003cli\u003eFixture \u0026amp; Dimensions……..42.4” L x 42” W x 2.4” H | 30lbs\u003c\/li\u003e\n\u003cli\u003eMounting height……………..≥6” (15.2cm) Above Canopy\u003c\/li\u003e\n\u003cli\u003eThermal Management……..Passive\u003c\/li\u003e\n\u003cli\u003eDimming………………………...0-10V\u003c\/li\u003e\n\u003cli\u003eLight Distribution……………..120°\u003c\/li\u003e\n\u003cli\u003eLife Time……………………….L90: \u0026gt;54,000 hrs\u003c\/li\u003e\n\u003cli\u003ePower Factory………………..\u0026gt;90%\u003c\/li\u003e\n\u003cli\u003eCertification…………………..IP65, ETL, CE\u003c\/li\u003e\n\u003cli\u003eWarranty…………………….. 3 Years Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.bghydro.com\/media\/catalog\/product\/r\/o\/roi-e680-2.JPG\" alt=\"\" width=\"686\" height=\"442\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e \u003c\/h4\u003e","brand":"Grower's Choice","offers":[{"title":"Default Title","offer_id":41879708139605,"sku":"12927","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/growers-choice-x-tsl-hortitech-roi-e680-led-grow-light-277v-12927-9114332.jpg?v=1767477190"},{"product_id":"fluence-vypr-2p-led-grow-light-system","title":"Fluence VYPR 2p LED Grow Light System","description":"\u003cp\u003eWith energy efficiency reaching 2.7 µmol\/J and 1700 PPF, VYPR is a path to sustainability and productivity.\u003c\/p\u003e\n\u003cp\u003eVYPR 2p is a full-cycle top lighting solution for high bay growing environments. VYPR 2p is ideal for greenhouse supplemental lighting or indoor sole-source lighting. VYPR 2p builds on the previous generation’s VYPRx PLUS performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrow Into The Night. Grow Into The Winter. Grow Year-Round.\u003c\/strong\u003e Whether extending your day or extending your season, VYPR has the power, energy efficiency and longevity to grow sunup to sundown to sunup… year-round.\u003c\/p\u003e\n\u003cp\u003eVYPR is only 2.9” wide for shade free deployment. VYPR has a photosynthetic photon flux (PPF) up to 1700 µmol\/s. New power supply enclosure equipped with PushLock connectors for quick and easy installation.\u003c\/p\u003e\n\u003cp\u003eAll VYPR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height is ≥ 24” (61cm) above the canopy. BGH (and Fluence) both recommend a mounting height of approx. 3.5' above canopy, which will cover 16-18 sq ft and achieve approx. 950 PPFD. We do not recommend using the VYPR as a single light source, it's primarily designed to be used in large rooms where many VYPR's will be needed\/deployed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003eCompared to PhysioSpec Indoor, \u003cstrong\u003ePhysioSpec Greenhouse \u003c\/strong\u003eis enriched with a higher amount of blue photons in the 400-500nm range, which are used to offset plant stretch induced by the sun’s far red radiation. As an added bonus, PhysioSpec Greenhouse offers a world-class work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Pipe Bracket:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures below pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Square Bracket:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures from structural channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures from Unistrut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Options:\u003c\/strong\u003e The power supply is connected to the fixture using a DC Cord. A pair of Power Supply Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1700 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 631 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.7\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 9 lbs 4 oz (fixture), 12 lbs (power supply)\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™ or PhysioSpec Greenhouse™\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 100-277v. Amperage depends on fixture wattage (631W for VYPR 2p) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.2A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 3.03A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 2.63A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.28A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eStarting late 2019 all VYPR 2p's will now ship with the new PSU power supply (as opposed to the old PSE model). This new PSU is much smaller and lighter than the old PSE. See product images for specs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll VYPR 2 systems are guaranteed against manufacturing defects for five years with projected lifetime of 50,000 operating hours to 90 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708172373,"sku":"108200","price":1075.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-vypr-2p-led-grow-light-system-108200-7404736.png?v=1767477189"},{"product_id":"fluence-vypr-2x-led-grow-light-system","title":"Fluence VYPR 2x LED Grow Light System","description":"\u003cp\u003eVYPR 2x is comparable to VYPRx with a 20% increase in output and a shorter form factor, now just 24” long, VYPR 2x is an ideal greenhouse grow light or indoor high ceiling grow light for low DLI crops and operations looking to extend their photoperiod.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrow Into The Night. Grow Into The Winter. Grow Year-Round.\u003c\/strong\u003e Whether extending your day or extending your season, VYPR has the power, energy efficiency and longevity to grow sunup to sundown to sunup… year-round.\u003c\/p\u003e\n\u003cp\u003eVYPR is only 2.9” wide for shade free deployment. VYPR has a photosynthetic photon flux (PPF) up to 900 µmol\/s. New power supply enclosure equipped with PushLock connectors for quick and easy installation.\u003c\/p\u003e\n\u003cp\u003eAll VYPR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height is ≥ 24” (61cm) above the canopy. BGH (and Fluence) both recommend a mounting height of approx. 3.5' above canopy, which will cover 16-18 sq ft and achieve approx. 950 PPFD. We do not recommend using the VYPR as a single light source, it's primarily designed to be used in large rooms where many VYPR's will be needed\/deployed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments.  With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"{{media%20url='wysiwyg\/BGH\/productdesc\/SPDC_PhysioSpec.png'}}\" alt=\"PhysioSpec Indoor Spectrum\"\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to PhysioSpec Indoor, \u003cstrong\u003ePhysioSpec Greenhouse \u003c\/strong\u003eis enriched with a higher amount of blue photons in the 400-500nm range, which are used to offset plant stretch induced by the sun’s far red radiation. As an added bonus, PhysioSpec Greenhouse offers a world-class work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"{{media%20url='wysiwyg\/BGH\/productdesc\/SPDC_PhysioSpec-Greenhouse-966.png'}}\" alt=\"PhysioSpec Indoor Spectrum\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Pipe Bracket:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures below pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Square Bracket:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures from structural channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures from Unistrut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Options:\u003c\/strong\u003e The power supply is connected to the fixture using a DC Cord. A pair of Power Supply Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 900 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 342 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.6\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 4 lbs 15 oz (fixture), 9 lbs (power supply)\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™ or PhysioSpec Greenhouse™\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 100-277v. Amperage depends on fixture wattage (631W for VYPR 2p) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 2.85A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 1.64A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 1.43A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 1.23A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll VYPR 2 systems are guaranteed against manufacturing defects for five years with projected lifetime of 50,000 operating hours to 90 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708205141,"sku":"108480","price":740.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-vypr-2x-led-grow-light-system-108480-4440481.png?v=1767477191"},{"product_id":"fluence-spydrx-plus-led-grow-light-system","title":"Fluence SPYDRx PLUS LED Grow Light System","description":"\u003cp\u003eSPYDRx PLUS is a full-cycle top-lighting solution for commercial horticulture cultivation, with the power to scale from vegetative growth to bloom. For optimal results, we recommend SPYDRx PLUS deployed in environments with CO2 supplementation between 800-1400 ppm in reproductive growth stage due to high PPFD levels.\u003c\/p\u003e\n\u003cp\u003eSolid-state engineering coupled with a patent-pending form factor makes the SPYDRx family ideal for multi-tier vertical farming applications and single-tier applications including growth chambers, tables with adjacent aisles, and tents.\u003c\/p\u003e\n\u003cp\u003eWith a thickness of only 4.6” thin, and recommended mounting height just 6” from the top of the canopy, the SPYDR family is purposefully designed for vertical farming – from veg to bloom – with an average PPFD up to 1,030 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with their optional light intensity dimmer for precise control over PPFD, and offer the flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height 6” from top of canopy for optimal light uniformity, penetration and flux density above a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-Bracket:\u003c\/strong\u003e This bracket can be attached to the top of the SPYDRx unit and then screwed into whatever you are attaching the console\/fixture to. This option is preferred by growers using multi-tier growing systems, since it takes up the least amount of vertical space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAircraft Cable:\u003c\/strong\u003e Also referred to as a \"Gripple\" this \"Y\" hanger is what most growers choose because it's a bit more adaptable to different uses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Cable Kit:\u003c\/strong\u003e This add-on is a \"yo-yo\" style hanger, and is basically an adjustable version of the Aircraft Cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1535 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 660 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.3\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 32\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 100-277V. Amperage depends on fixture wattage (660W for SPYDRx PLUS) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cp\u003eAmperage depends on fixture wattage (660W for SPYDRx PLUS) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.5A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 3.2A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 2.8A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.4A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years with projected lifetime of 100,000 operating hours to 70 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708270677,"sku":"980900","price":1350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydrx-plus-led-grow-light-system-980900-7316171.png?v=1767477192"},{"product_id":"fluence-spydr-2p-47-led-grow-light-system","title":"Fluence SPYDR 2p 47\" LED Grow Light System","description":"\u003ch3\u003eIntroducing the second generation SPYDR Series.\u003cbr\u003eIteratively designed with you in mind.\u003c\/h3\u003e\n\u003cp\u003eSPYDR 2p is a full-cycle top lighting solution for commercial cultivation, with the power to scale from vegetative growth to higher light intensities in bloom. For optimal results, we recommend SPYDR 2p deployed in environments with C02 supplementation between 800-1400 ppm in reproductive growth stage due to high PPFD levels. SPYDR 2p builds on the previous generation’s SPYDRx PLUS performance.\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 2p has been designed with commercial growers in mind. With the upgraded form factor, the SPYDR 2 Series unfolds out of the box for a faster installation and a plug and play solution. SPYDR Series is ideal for both multi and single-tier applications including vertical farms, growth cambers, tables with adjustable aisles, and tents.\u003c\/p\u003e\n\u003cp\u003eWith a remotely mountable power supply, the SPYDR 2 Series is just 1.3” thin with a recommended mounting height of 6” above canopy. The SPYDR Series is purposefully designed for multi-tier cultivation – from veg to bloom – with PPFD up to 1,060 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1580 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 632 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.5\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 24lbs 13oz\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard SPYDR 2 Series fixtures ship with autosensing 100-277V power supplies.\u003c\/strong\u003e\u003c\/em\u003e To order 347V, 400V or 480V SPYDR 2 models, please contact us for pricing and lead times. Amperage depends on fixture wattage (632W for SPYDR 2p) and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage. Please note that 347V, 400V \u0026amp; 480V SPYDR 2 Series fixtures operate at an average of 3% higher wattage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.27A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 3.04A\u003c\/li\u003e\n\u003cli\u003eAmps @240V: 2.63A\u003c\/li\u003e\n\u003cli\u003eAmps @277V: 2.28A\u003c\/li\u003e\n\u003cli\u003eAmps @347V: 1.88A\u003c\/li\u003e\n\u003cli\u003eAmps @400V: 1.63A\u003c\/li\u003e\n\u003cli\u003eAmps @480V: 1.36A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eStarting late 2019 all SPYDR 2p's will now ship with the new PSU power supply (as opposed to the old PSE model). See product images for specs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE:\u003c\/b\u003e The SPYDR 2p's conformal coating is subject to degradation when it comes into contact with sulfur. Therefore, burning sulfur around these fixtures will void the warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr-comparison-1.png?v=1767933728\" alt=\"SPYDR Comparison Chart\" style=\"float: none;\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Low Voltage (120-277V)","offer_id":42152711127125,"sku":"104560","price":420.0,"currency_code":"USD","in_stock":false},{"title":"High Voltage (208-480V)","offer_id":42152711159893,"sku":"104561","price":420.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2p-47-led-grow-light-system-104560-3647266.png?v=1767477135"},{"product_id":"fluence-spydrx-led-grow-light-system","title":"Fluence SPYDRx LED Grow Light System","description":"\u003cp\u003eDesigned as an vegetative-stage, top-lighting solution for commercial applications, and as a full-cycle top-lighting solution for residential applications without CO2 supplementation.\u003c\/p\u003e\n\u003cp\u003eSolid-state engineering coupled with a patent-pending form factor makes the SPYDRx family ideal for multi-tier vertical farming applications and single-tier applications including growth chambers, tables with adjacent aisles, and tents.\u003c\/p\u003e\n\u003cp\u003eWith a thickness of only 4.6” thin, and recommended mounting height just 6” from the top of the canopy, the SPYDR family is purposefully designed for vertical farming – from veg to bloom – with an average PPFD up to 1,030 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with their optional light intensity dimmer for precise control over PPFD, and offer the flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height 6” from top of canopy for optimal light uniformity, penetration and flux density above a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-Bracket:\u003c\/strong\u003e This bracket can be attached to the top of the SPYDRx unit and then screwed into whatever you are attaching the console\/fixture to. This option is preferred by growers using multi-tier growing systems, since it takes up the least amount of vertical space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAircraft Cable:\u003c\/strong\u003e Also referred to as a \"Gripple\" this \"Y\" hanger is what most growers choose because it's a bit more adaptable to different uses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Cable Kit:\u003c\/strong\u003e This add-on is a \"yo-yo\" style hanger, and is basically an adjustable version of the Aircraft Cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 810 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 330 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.5\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 22\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 100-277V.\u003c\/p\u003e\n\u003cp\u003eAmperage depends on fixture wattage (330W for SPYDRx) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 2.8A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 1.6A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 1.4A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 1.2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years with projected lifetime of 100,000 operating hours to 70 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708336213,"sku":"980800","price":875.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydrx-led-grow-light-system-980800-4461877.png?v=1767477136"},{"product_id":"fluence-spydr-2x-47-led-grow-light-system","title":"Fluence SPYDR 2x 47\" LED Grow Light System","description":"\u003ch3\u003eIntroducing the second generation SPYDR Series.\u003cbr\u003eIteratively designed with you in mind.\u003c\/h3\u003e\n\u003cp\u003eWith a remotely mountable power supply, the SPYDR 2 Series is just 1.3” thin with a recommended mounting height of 6”–12″ above canopy. The SPYDR Series is purposefully designed for multi-tier growing – from veg to bloom – with PPFD up to 1,060 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eSPYDR 2x is an early-development stage top-lighting solution for commercial horticulture growing, or a full-cycle top-lighting solution for home hobbyists growing without CO2 supplementation at ambient conditions around 400 ppm. SPYDR 2x is comparable to SPYDRx.\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 2 series has been designed with commercial growers in mind. With the upgraded form factor, the SPYDR 2 series unfolds out of the box for a faster installation and a plug and play solution. SPYDR Series is ideal for both multi and single-tier applications including vertical farms, growth cambers, tables with adjustable aisles, and tents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrow vertical\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a remotely mountable power supply, the SPYDR 2 Series is just 1.3” thin with a recommended mounting height of 6” above canopy. The SPYDR Series is purposefully designed for multi-tier growing – from veg to bloom – with PPFD up to 1,060 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PhysioSpec Indoor Spectrum\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 860 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 345 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.6\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 24lbs 13oz\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard SPYDR 2 Series fixtures ship with autosensing 100-277V power supplies.\u003c\/strong\u003e\u003c\/em\u003e To order 347V, 400V or 480V SPYDR 2 models, please contact us for pricing and lead times. Amperage depends on fixture wattage (345W for SPYDR 2x) and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage. Please note that 347V, 400V \u0026amp; 480V SPYDR 2 Series fixtures operate at an average of 3% higher wattage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 2.71A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 1.56A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 1.35A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 1.17A\u003c\/li\u003e\n\u003cli\u003eAmps @ 347V: 0.96A\u003c\/li\u003e\n\u003cli\u003eAmps @ 400V: 0.84A\u003c\/li\u003e\n\u003cli\u003eAmps @ 480V: 0.7A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr-comparison-1.png?v=1767933728\" alt=\"SPYDR Comparison Chart\" style=\"float: none;\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708368981,"sku":"107420","price":593.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2x-47-led-grow-light-system-107420-2900987.png?v=1767477134"},{"product_id":"fluence-spydr-2x-33-led-grow-light-system","title":"Fluence SPYDR 2x 33\" LED Grow Light System","description":"\u003ch3\u003eIntroducing the second generation SPYDR Series.\u003cbr\u003eIteratively designed with you in mind.\u003c\/h3\u003e\n\u003cp\u003eThe SPYDR 2x 33\" provides excellent coverage over a 4' x 3' canopy. Perfect for smaller areas or to fill in rows where another full-sized (47\") 2i would more be than what's needed (e.g. using two 2i 33\" fixtures plus one 47\" fixture to cover a perfect 10' long row).\u003c\/p\u003e\n\u003cp\u003eWith a remotely mountable power supply, the SPYDR 2 Series is just 1.3” thin with a recommended mounting height of 6”–12″ above canopy. The SPYDR Series is purposefully designed for multi-tier cultivation.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eSPYDR 2x is an early-development stage top-lighting solution for commercial horticulture cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO2 supplementation at ambient conditions around 400 ppm. SPYDR 2x is comparable to SPYDRx.\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 2 series has been designed with commercial growers in mind. With the upgraded form factor, the SPYDR 2 series unfolds out of the box for a faster installation and a plug and play solution. SPYDR Series is ideal for both multi and single-tier applications including vertical farms, growth cambers, tables with adjustable aisles, and tents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 705 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 294 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.4\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eFixture Weight (lbs): 12.5 lbs\u003c\/li\u003e\n\u003cli\u003ePSE Weight (lbs): 8.2\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 3 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard SPYDR 2 Series fixtures ship with autosensing 100-277V power supplies.\u003c\/strong\u003e\u003c\/em\u003e To order 347V, 400V, 480V or European SPYDR 2 models, please contact us for pricing and lead times. Amperage depends on fixture wattage and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage. Please note that 347V, 400V \u0026amp; 480V SPYDR 2 Series fixtures operate at an average of 3% higher wattage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 2.48A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 1.41A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 1.27A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 1.06A\u003c\/li\u003e\n\u003cli\u003eAmps @ 347V: 0.84A\u003c\/li\u003e\n\u003cli\u003eAmps @ 400V: 0.72A\u003c\/li\u003e\n\u003cli\u003eAmps @ 480V: 0.60A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR 2 systems are guaranteed against manufacturing defects for 5 years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708401749,"sku":"131720","price":683.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2x-33-led-grow-light-system-131720-6282824.png?v=1767477134"},{"product_id":"gavita-ct1930e-led-120-277v","title":"Gavita CT1930e LED 120-277V","description":"\u003cp\u003eThe revolutionary new Gavita CT 1930e is the first and only LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS.\u003c\/p\u003e\n\u003cp\u003eCompatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size.\u003c\/p\u003e\n\u003cp\u003eThe CT 1930e delivers more crop-loving light in a broader spectrum at up to 20% energy savings than Gavita 1000 W DE and single ended HPS fixtures (based on average wattage of each fixture).\u003c\/p\u003e\n\u003cp\u003eCompatible with Gavita EL Master Controllers (sold separately) and most building automation systems. Patent-pending controller technology embedded within each fixture enables control of up to 2,000 fixtures per EL Master control channel and helps maintain unwavering output from light to light. If connecting to the Gavita EL1 or 2 controller purchase of HGC906717 or HGC906716 is required.\u003c\/p\u003e","brand":"Gavita","offers":[{"title":"Gavita 8 ft Power Cord 120 Volt for LED","offer_id":41879708467285,"sku":"13295-10643","price":1020.38,"currency_code":"USD","in_stock":true},{"title":"Gavita 8 ft Power Cord 208-240 Volt for LED","offer_id":41879708500053,"sku":"13295-10644","price":1020.38,"currency_code":"USD","in_stock":true},{"title":"Gavita 8 ft Power Cord 277 Volt for LED","offer_id":41879708532821,"sku":"13295-10645","price":1020.38,"currency_code":"USD","in_stock":true},{"title":"Gavita 8 ft Power Cord 277-400 Volt for Gavita LED","offer_id":41879708565589,"sku":"13295-13041","price":1020.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/gavita-ct1930e-led-120-277v-gavita-8-ft-power-cord-120-volt-for-led-13295-10643-7641982.jpg?v=1767477134"},{"product_id":"fluence-spydr-fang-led-grow-light","title":"Fluence SPYDR FANG LED Grow Light","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe wait is over! An American-made, full spectrum LED for the price of a China-made knockoff. This is the real deal.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFor the last few years, companies like Gavita, Luxx, Growers Choice and many others have tried to copy what Fluence innovated with the original SPYDRx PLUS. Because all of them (except Gavita) are manufactured in China, many growers chose to spend less (and we totally get it!).\u003c\/p\u003e\n\u003cp\u003eBut now, Fluence brings a fixture to the table that is almost identical to their flagship SPYDR 2p, but priced like a China-made Luxx or Grower's Choice. And we couldn't be happier about it.\u003c\/p\u003e\n\u003cp\u003eThe main differences between the SPYDR 2p and the FANG are that the FANG has a slightly higher output, comes with a detachable dimmer module (0-100% in 10% increments) and has a 3 year warranty instead of a 5 year. Oh, and it's a lot less expensive!\u003c\/p\u003e\n\u003cp\u003eThe FANG is compatible with all SPYDR 2 accessories, including mounting hardware, AC Flex and DC Flex cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBroad R4 (PhysioSpec Indoor) \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e This is the standard mounting option, and is included free with your purchase of a FANG. Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCord Options:\u003c\/strong\u003e The FANG ships with a 6' long 120V (NEMA 5) power cord. Additional cords are available for purchase separately, including 15' long cords and cords with other plug types. FANG fixtures are compatible with all Fluence SPYDR 2 power cords (e.g. 2x, 2p, 2i and 2h power cords).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1600 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 626 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.5\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 24.8 lbs\u003c\/li\u003e\n\u003cli\u003eSpectrum: Broad R4\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8\" in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SPYDR FANG fixture ships with an autosensing 100-277V power supply.\u003c\/strong\u003e\u003c\/em\u003e Amperage depends on fixture wattage (632W for SPYDR 2p) and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.32A\u003c\/li\u003e\n\u003cli\u003eAmps @ 230\/240V: 2.79A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.34A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"SPYDR Comparison Chart\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr-comparison-1.png?v=1767933728\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"6' 120V (NEMA 5) Power Cord","offer_id":41879708598357,"sku":"7242-171_68","price":424.95,"currency_code":"USD","in_stock":false},{"title":"6' 240V (NEMA 6) Power Cord","offer_id":41879708631125,"sku":"7242-172_68","price":424.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-fang-led-grow-light-6-120v-nema-5-power-cord-7242-171-68-4940479.jpg?v=1767477133"},{"product_id":"nanolux-ledzx-630w-commercial-led-fixture","title":"Nanolux LEDzx 630w Commercial LED Fixture","description":"\u003ch3\u003eNanoLux LEDzx 630W Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e110V-277V wide voltage design, available with different NEMA power plugs for a wider range of voltage used.\u003c\/li\u003e\n\u003cli\u003eFolding design facilitates transportation and saves on shipping and storage costs.\u003c\/li\u003e\n\u003cli\u003eModular patented design.\u003c\/li\u003e\n\u003cli\u003eDigital control buttons are used for smart digital dimming with dimming ranges of 105W, 210W, 315W, 420W, 525W, and 630W\u003c\/li\u003e\n\u003cli\u003eSmart digital bar protection system: Upon one or more bar failures the system will digitally protect working bars and the power supply allowing for continuous ongoing operation.\u003c\/li\u003e\n\u003cli\u003eIP65 design protects against environmental conditions such as moisture and dust.\u003c\/li\u003e\n\u003cli\u003eIncluded features: Random start, soft start, soft dimming, over-temperature, over-voltage and open\/short circuit protection.\u003c\/li\u003e\n\u003cli\u003eCompatible with various 0-10V control systems.\u003c\/li\u003e\n\u003cli\u003eUses Sanan high-quality horticultural chips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLight Output PPF \u003c\/b\u003e1650 μmol\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency \u003c\/b\u003e2.62 μmol\/J\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimmingj \u003c\/b\u003e0-10V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Power \u003c\/b\u003e630W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Voltage \u003c\/b\u003eAC 110V-277V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Height \u003c\/b\u003e8”- 20” (20-50cm) above canopy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperating Temperature \u003c\/b\u003e0°C~35°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperating Humidity \u003c\/b\u003e0~95%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThermal Management \u003c\/b\u003ePassive\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRequirement of Installment \u003c\/b\u003eComply with ETL\/FCC\/CE\/EAC certificate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLifetime L90 \u003c\/b\u003e\u0026gt; 50,000hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Dimensions \u003c\/b\u003e48\" L x 46\" W x 3\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight \u003c\/b\u003e24\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaing Dimensions \u003c\/b\u003e48\" L x 24\" W x 4\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGross Weight \u003c\/b\u003e28\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty \u003c\/b\u003e5 Year standard warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GrowGeneration","offers":[{"title":"Default Title","offer_id":41879708696661,"sku":"13500","price":790.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/nanolux-ledzx-630w-commercial-led-fixture-13500-8734534.jpg?v=1767477134"},{"product_id":"floraflex-incubator-led-clone-light-2-pack-luxx-clone-led-replacement","title":"FloraFlex Incubator LED Clone Light - 2 pack","description":"\u003cp\u003eThe FloraFlex Incubator LED Clone Light (2pk) is the perfect replacement for a T5 fluorescent light fixture. The Incubator LED Clone Light is 67% more efficient, has a higher PPF, lasts longer and emits less heat than traditional fluorescent clone lights. It is fully waterproof, rated for 54,000 hours, and comes with a standard 5 year warranty.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes (2) 18W Incubator LED Clone Lights per box\u003c\/li\u003e\n\u003cli\u003eColor Temperature : \u003cstrong\u003e9000 Kelvin\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePPE : \u003cstrong\u003e2.6 μmol\/J\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePPF : \u003cstrong\u003e46.8 μmol\/s\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBeam Angle : \u003cstrong\u003e120º\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWater resistant housing and connectors\u003c\/li\u003e\n\u003cli\u003e18W per strip (0.15 amps on 120V)\u003c\/li\u003e\n\u003cli\u003eLength: 42.75 Inches\u003c\/li\u003e\n\u003cli\u003eDaisy chain up to 100 strips on a 20 amp circuit\u003c\/li\u003e\n\u003cli\u003eUse two strips per shelf\u003c\/li\u003e\n\u003cli\u003eHang using the zip tie slot for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FloraFlex","offers":[{"title":"Default Title","offer_id":41879708991573,"sku":"14087","price":60.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-incubator-led-clone-light-2-pack-14087-2042109.jpg?v=1767477134"},{"product_id":"gavita-rs-1900e-led-208-480-volt","title":"Gavita RS 1900e LED 208-480 Volt","description":"\u003cdiv class=\"attach_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-gavita-HGC906410_Gavita_RS_1900e_LED_Spec_Sheet.pdf?v=1767658078\" title=\"Gavita RS 1900e LED\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg class=\"aligned-img\" alt=\"PDF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/icon-pdf-35.png\"\u003e \n\u003cstrong\u003e\u003cspan class=\"aligned-text\"\u003eGavita RS 1900e LED Specifications Sheet\n\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\n\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe RS 1900e is the latest offering from Gavita, and replaces the old 1700e. It has a PAR output of 1900 µmol s-1 and an efficiency of 3.0 µmol\/j. It delivers a broad white light with an enhanced blue spectrum, which some studies show may intensify secondary metabolites, such as terpenes and cannabinoids. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis powerful, full-spectrum light source is intended for both vegetative and flowering stages. Used in conjunction with the Gavita Master EL3 Controller (sold separately), this fixture can be dimmed down to 10%. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1900e utilizes a lightweight, 6-bar design similar to the Gavita Pro RS 2400e LED,\u003cspan style=\"font-weight: 400;\"\u003e and a Gavita broad range driver and custom made Gavita diodes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBroad white light with an enhanced blue spectrum, which some studies show may intensify secondary metabolites, such as terpenes and cannabinoids.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eDimmable down to 10% with the \u003c\/span\u003eGavita EL3 Master controller (sold separately)\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eA light weight, 6-bar design built off the platform of the Gavita Pro RS 2400e LED to deliver high output and efficiency\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePremium Gavita diodes and drivers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEmbedded adapter for maximum controllability with the Gavita EL3 Master controller (sold separately)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIP66 wet rating and ANSI\/CAN\/UL 8800 compliant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e5 year limited warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eGavita broad range driver to accommodate a larger voltage range of 208 - 480 V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eQuick Specifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eModel No. HGC906410\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eVolt: 208 - 480 V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFrequency: 50\/60 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eETL Listed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWatts: 650 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCurrent at 208 V: 3.1 A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCurrent at 480 V: 1.34 A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMax Ambient Temp: 40° C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDim: 44.8 in x 43.25 in x 3.3 in\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWeight: 27.5 lb\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BFG Supply","offers":[{"title":"208\/240 Volt - 8'","offer_id":41879709089877,"sku":"14540","price":698.14,"currency_code":"USD","in_stock":true},{"title":"277-400 Volt - 8'","offer_id":41879709057109,"sku":"14540-HV","price":698.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/gavita-rs-1900e-led-208-480-volt-277-400-volt-8-14540-8275443.jpg?v=1767477135"},{"product_id":"fluence-vypr-3p-led-grow-light-system","title":"Fluence VYPR 3p LED Grow Light System","description":"\u003cp class=\"title-w-sub\"\u003e\u003cb\u003eEFFICIENT AND POWERFUL FOR BOUNTIFUL HARVESTS ALL YEAR LONG\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt upon patented thermal management technologies, the latest VYPR top lights feature market-leading efficacies and high light output per fixture. Thus, helping reduce the fixture count and system cost per lit area to accelerate the adoption of LED horticulture lighting.\u003c\/p\u003e\n\u003cp\u003eWith more compact power supplies, beam widening reflectors and new mounting options, the latest VYPR empowers growers to achieve their growing targets all year round.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGROWER'S CHOICE OF SPECTRUM\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eFrom broad white to high red, Fluence PhysioSpec is offering BROAD and DUAL spectrum options on VYPR Series. This flexibility prioitizes the grower's needs in optoimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhysioSpec ™ BROAD Spectra\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe PhysioSpec™ BROAD Spectra offers photon emission across the PAR 400-700nm continuous wavelength range, balancing energy efficiency with quality of light for desired plant response and human work environment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhysioSpec ™ DUAL Spectra\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe PhysioSpec™ DUAL Spectra features two narrow spectral bands that maximize energy efficiency, aiming to further reduce energy cost and operational expense.\u003c\/p\u003e\n\u003cp\u003eAll VYPR models are dimmable for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height is ≥ 24” (61cm) above the canopy. BGH (and Fluence) both recommend a mounting height of approx. 3.5' above canopy, which will cover 16-18 sq ft and achieve approx. 950 PPFD. We do not recommend using the VYPR as a single light source, it's primarily designed to be used in large rooms where many VYPR's will be needed\/deployed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Wire Hangers:\u003c\/strong\u003e These standard mounting options include Pipe, Unistrut and Square wire hangers. Ideal for mounting under the truss or pairing with chain or cable to suspend the fixture lower.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCombo Mount:\u003c\/b\u003e Stacking the light fixture and power supply under the truss allows individual VYPRs to be close to one another without a second support structure for hanging the power supplies \u003ci\u003e\u003cb\u003e(for AC input voltage 277-480V only)\u003c\/b\u003e\u003c\/i\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePSU2 Surface Mount:\u003c\/b\u003e Mounting the power supply above the truss increases VYPR's distance to crops for better light uniformity, and allows VYPRs to be close to one another without a second support structure for hanging the power supplies \u003ci\u003e\u003cb\u003e(for AC Input Voltage 277-480 V only)\u003c\/b\u003e\u003c\/i\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVYPR Parallel to Truss Mount:\u003c\/b\u003e This mounting option maximizes light fixture's distance to crops for better light uniformity, and clears the space under the truss for operating other equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVYPR Perpendicular to Truss Mount:\u003c\/b\u003e This mounting option allows the fixture to hang perpendicular to the truss to be in parallel to high-wire crop rows, providing better light uniformity without installing additional support structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Options:\u003c\/strong\u003e The power supply is connected to the fixture using a DC Cord. A pair of Power Supply Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: up to 2330 µmol\/s (depending on chosen spectrum)\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 620 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.7-3.8 (depending on chosen spectrum)\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 7.8 lbs (fixture), 7.1 lbs (power supply)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 120-277v (347-480v model also available). Amperage depends on fixture wattage and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.3A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 3.0A\u003c\/li\u003e\n\u003cli\u003eAmps @ 230V: 2.7A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.23A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll VYPR 3 systems are guaranteed against manufacturing defects for five years with projected lifetime of 50,000 operating hours to 90 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879709253717,"sku":"722001","price":632.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-vypr-3p-led-grow-light-system-722001-4580803.png?v=1767477131"},{"product_id":"floraflex-700w-full-spectrum-led-grow-light-120v","title":"FloraFlex 700w Full Spectrum LED Grow Light","description":"\u003ch3\u003ePowerful. Affordable. Bright.\u003c\/h3\u003e\n\u003cp\u003eThe ultimate grow light with the most advanced full spectrum custom diodes ever built in a 700 Watt LED.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo Tools Required for Assembly\u003c\/li\u003e\n\u003cli\u003eSelf-Assembly in Under 5 Minutes\u003c\/li\u003e\n\u003cli\u003e8-Bar Design for Optimal Light Distribution\u003c\/li\u003e\n\u003cli\u003eDaisy Chain Capable\u003c\/li\u003e\n\u003cli\u003eDesigned for Maximum Plant Health and Yield\u003c\/li\u003e\n\u003cli\u003eLightweight and Easy to Install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source: LED\u003c\/li\u003e\n\u003cli\u003eVeg Coverage: 5' x 5'\u003c\/li\u003e\n\u003cli\u003eBloom Coverage: 4' x 4'\u003c\/li\u003e\n\u003cli\u003eLight Output PPF: 1890 µmol\/s\u003c\/li\u003e\n\u003cli\u003eEfficacy PPE: 2.7 µmol\/J\u003c\/li\u003e\n\u003cli\u003eAC Input Power: 700W\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 120-277V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eLight Distribution: 120°\u003c\/li\u003e\n\u003cli\u003eMounting Height: 12\" - 24\" (30.48cm - 60.96cm)\u003c\/li\u003e\n\u003cli\u003eThermal Management: Passive\u003c\/li\u003e\n\u003cli\u003eMax Ambient Temperature: 95°F \/ 35°C\u003c\/li\u003e\n\u003cli\u003eDimming: 0-10V (compatible with TrolMaster; use LMA-14 lighting adapter)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): 15%\u003c\/li\u003e\n\u003cli\u003eLifetime: L90 \u0026gt; 50,000hrs\u003c\/li\u003e\n\u003cli\u003eCertifications: DLC, UL 8800, UL 1598\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 Year Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FloraFlex","offers":[{"title":"120V","offer_id":41879709286485,"sku":"20010-173_69","price":342.31,"currency_code":"USD","in_stock":true},{"title":"240V","offer_id":41879709319253,"sku":"20010-174_69","price":342.31,"currency_code":"USD","in_stock":true},{"title":"277V","offer_id":41879709352021,"sku":"20010-175_69","price":342.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-700w-full-spectrum-led-grow-light-120v-20010-173-69-9614470.jpg?v=1767477133"},{"product_id":"fluence-spydr-2h-47-led-grow-light-system","title":"Fluence SPYDR 2h 47\" LED Grow Light System","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIncrease in PPF Increase efficiency by 28% and maximizes space with greater light intensity.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSPYDR 2h\u003c\/strong\u003e is a high-output grow light for commercial cultivation environments, producing a photosynthetic photon flux (PPF) of 2,180 µmol\/s. With strong uniformity and our PhysioSpec broad R4 spectrum, SPYDR 2h is designed to maximize yields for growers by incorporating high-intensity lighting and cultivation strategies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetachable Power Supply\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 2 Series features a detachable Power Supply that can be mounted remotely on the side of a rack or on an adjacent wall to remove heat from your grow space. With the power supply remote mounted, the remaining SPYDR 2 fixture is only 1.3” (33 mm) thin (4.6” (117 mm) with power supply attached).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePush-lock Connectors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor quick and easy installation, all SPYDR 2 Series fixtures and associated cables have been updated with Push-Lock connectors. Power and dimming cables now snap together with a light push while still retaining their IP66 wet-location rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Mounting Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith the ability to maximize use of your growing space, SPYDR 2 has various hardware options for easy mounting to all types of racks and tables with no drilling or other modifications to the rack system.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height of 6”–12″ (152 x 305 mm) above plant canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @230V: 3.63A\u003c\/li\u003e\n\u003cli\u003eAmps @277V: 2.87A\u003c\/li\u003e\n\u003cli\u003eAmps @347V: 2.34A\u003c\/li\u003e\n\u003cli\u003eAmps @480V: 1.70A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"SPYDR 2r specs\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr2h_specs.jpg?v=1767934648\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879709384789,"sku":"141290","price":894.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2h-47-led-grow-light-system-141290-1705345.jpg?v=1767477134"},{"product_id":"grow-pros-4-led-clone-light-18-30w-2-pack","title":"Grow Pros 4' LED Clone Light 18\/30W - 2 pack","description":"\u003cp\u003eThe GPS 4' Clone Light is a 1:1 replacement for a T5 fluorescent light fixture ideal for providing high-performance, efficient illumination for seedlings and plants in the early vegetative state. Its sleek, low-profile and 4-ft length fits into low-clearance, vertical farming environments.\u003c\/p\u003e\n\u003cp\u003eThe GPS Clone Light Series is easy to install and features easy\u003cstrong\u003e daisy-chaining\u003c\/strong\u003e to connect multiple lights from end to end. The waterproof connections eliminate the need for an excess of power cords and electrical sockets when running multiple fixtures in a confined space.\u003c\/p\u003e\n\u003ch4\u003eFeatures and Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Install\u003c\/strong\u003e: Luminaires can be easily connected through double-ended connectors, daisy-chain up to 28 strips on 18W, daisy-chain up to 17 strips on 30W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy-to-Maintain Construction\u003c\/strong\u003e: PC cover is durable, easy to clean, and features excellent light transmittance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-Life\u003c\/strong\u003e: Excellent thermal management system consists of an aluminum heat sink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile\u003c\/strong\u003e: multi-shelved racks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Wattage\u003c\/strong\u003e \u003cstrong\u003eSwitch\u003c\/strong\u003e: 18w and 30w\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures\u003c\/strong\u003e: 24 x 660nm Far Red Diodes 24 x 460nm Pure Blue Diodes 144 x 4000K Full Spectrum White Diodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIntended Applications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCloning\u003c\/li\u003e\n\u003cli\u003eSeed Starting\u003c\/li\u003e\n\u003cli\u003eTissue CultureMicro Greens\u003c\/li\u003e\n\u003cli\u003eExotics Plants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat’s in the box\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Clone Lights (w\/ 12\" cable on each end)\u003c\/li\u003e\n\u003cli\u003e1 x 4' Power Cord\u003c\/li\u003e\n\u003cli\u003eMounting Brackets and Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grow Pros Solutions","offers":[{"title":"Each","offer_id":41879709417557,"sku":"20009","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/grow-pros-4-led-clone-light-1830w-2-pack-20009-1962980.jpg?v=1767477129"},{"product_id":"grow-pros-4-under-canopy-light-model-2-deep-red-spectrum-2","title":"Grow Pros 8' Under Canopy Light - Model 2 - 80% Deep Red Spectrum","description":"\u003cp\u003eThe Grow Pros Solutions 4′ under canopy light red spectrum version are designed to provide supplemental light to the lower regions of plants in indoor cultivation environments by strategically placing them beneath the top canopy of plants to ensuring leaves and flowers below the canopy receive optimal light exposure by eliminating shady areas. Under Canopy Grow Lights benefits include uniform light distribution,  maximizes yield and denser flower.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDLC Listed, eligible for rebate program from unity companies - contact us for details\u003c\/li\u003e\n\u003cli\u003eDesigned for enhancing plant growth and optimizing light availability to less exposed areas\u003c\/li\u003e\n\u003cli\u003eDeploys a lens angle of 120 degrees, from a singular bar design\u003c\/li\u003e\n\u003cli\u003eBuilt-in driver, slim profile\u003c\/li\u003e\n\u003cli\u003eImprove overall quality specially B-bud structure, density, and coloring\u003c\/li\u003e\n\u003cli\u003eMaximize yields with a 25%-30% improvement\u003c\/li\u003e\n\u003cli\u003eUtilizes deep and far red spectrum\u003c\/li\u003e\n\u003cli\u003eOptimized Infrared + full spectrum proven for veg and flowering stages\u003c\/li\u003e\n\u003cli\u003eCompact and lightweight, heavy duty components and quality\u003c\/li\u003e\n\u003cli\u003eEasy to work around during harvest\u003c\/li\u003e\n\u003cli\u003eQuick to uninstall between setting up and taking down runs\u003c\/li\u003e\n\u003cli\u003ePower and data chaining through same connections, no extra components required\u003c\/li\u003e\n\u003cli\u003eAccessories available: Under Canopy Grow Lights Stands, Interconnect Cable, 120V Power Cord (L-15P) with attached RJ12 Data Cable, 240V commercial power cords - \u003ci\u003eSold Separately\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Grow Pros Solutions 125W 4′ under canopy grow lights have been developed by assessing SMD (Surface Mount Device) chips and drivers from leading manufacturers in controlled test applications and cultivation facilities. It’s IR spectrum penetrate deep into the plant canopy, sparking life in lower regions of the canopy and nurturing robust growth from top to bottom.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWattage: 125W\u003c\/li\u003e\n\u003cli\u003eInput power: 120V-277V \/ 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eColor: Full Spectrum + Infrared\u003c\/li\u003e\n\u003cli\u003eLifespan: 90% output at 36,000 hours\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 years limited\u003c\/li\u003e\n\u003cli\u003eAmperage:\n\u003cul\u003e\n\u003cli\u003e120V – 1.04A\u003c\/li\u003e\n\u003cli\u003e208V – 0.60A\u003c\/li\u003e\n\u003cli\u003e240V – 0.52A\u003c\/li\u003e\n\u003cli\u003e277V – 0.45A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaisy chain:\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e13 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e15 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat’s in the box\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 4ft Under Canopy Light \u003ci\u003e\u003cb\u003e(power cord sold separately)\u003c\/b\u003e\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Grow Pros Solutions","offers":[{"title":"Default Title","offer_id":41879709450325,"sku":"20266","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/grow-pros-8-under-canopy-light-model-2-80-deep-red-spectrum-20266-3781751.png?v=1767477130"},{"product_id":"grow-pros-4-under-canopy-light-model-2-80-deep-red-spectrum-2-pack","title":"Grow Pros 4' Under Canopy Light - Model 2 - 80% Deep Red Spectrum","description":"\u003cp\u003eThe Grow Pros Solutions 4′ under canopy light red spectrum version are designed to provide supplemental light to the lower regions of plants in indoor cultivation environments by strategically placing them beneath the top canopy of plants to ensuring leaves and flowers below the canopy receive optimal light exposure by eliminating shady areas. Under Canopy Grow Lights benefits include uniform light distribution,  maximizes yield and denser flower.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDLC Listed, eligible for rebate program from unity companies - contact us for details\u003c\/li\u003e\n\u003cli\u003eDesigned for enhancing plant growth and optimizing light availability to less exposed areas\u003c\/li\u003e\n\u003cli\u003eDeploys a lens angle of 120 degrees, from a singular bar design\u003c\/li\u003e\n\u003cli\u003eBuilt-in driver, slim profile\u003c\/li\u003e\n\u003cli\u003eImprove overall quality specially B-bud structure, density, and coloring\u003c\/li\u003e\n\u003cli\u003eMaximize yields with a 25%-30% improvement\u003c\/li\u003e\n\u003cli\u003eUtilizes deep and far red spectrum\u003c\/li\u003e\n\u003cli\u003eOptimized Infrared + full spectrum proven for veg and flowering stages\u003c\/li\u003e\n\u003cli\u003eCompact and lightweight, heavy duty components and quality\u003c\/li\u003e\n\u003cli\u003eEasy to work around during harvest\u003c\/li\u003e\n\u003cli\u003eQuick to uninstall between setting up and taking down runs\u003c\/li\u003e\n\u003cli\u003ePower and data chaining through same connections, no extra components required\u003c\/li\u003e\n\u003cli\u003eAccessories available: Under Canopy Grow Lights Stands, Interconnect Cable, 120V Power Cord (L-15P) with attached RJ12 Data Cable, 240V commercial power cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Grow Pros Solutions 125W 4′ under canopy grow lights have been developed by assessing SMD (Surface Mount Device) chips and drivers from leading manufacturers in controlled test applications and cultivation facilities. It’s IR spectrum penetrate deep into the plant canopy, sparking life in lower regions of the canopy and nurturing robust growth from top to bottom.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow to Determine How Many Power Cords and Interconnect Cables to Order\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOne pair of 4' UCL's are designed to cover a 4' x 4' area. Each UCL has a short, flexible pigtail that allows you to daisy-chain multiple fixtures together (both power and data\/dimming). So if you will be running multiple fixtures in a straight line and the fixtures will be very close to each other end-to-end, you would only need a single power cord and no extension cables.\u003c\/p\u003e\n\u003cp\u003eCommon configurations\/examples:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4' x 4' space: this would require (1) pair of UCL's, (1) power cord and (1) interconnect cable, since the two fixtures will be spaced a couple of feet apart, which is longer than the pigtails on the fixtures themselves.\u003c\/li\u003e\n\u003cli\u003e4' x 8' space: this would require (2) pair of UCL's, (1) power cord and (1) interconnect cable. Each pair of UCL's would be daisy-chained together using the attached pigtails to make an 8' long light, and the interconnect cable would join the first 8' section on one side of the space to the second 8' section on the other side. All four fixtures would be powered by the same power cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNow that you understand how the fixtures daisy chain together and how the interconnect cables are used, you can see how easy it is to expand this to larger spaces, custom benches, etc. Keep in mind there is a limit to how many fixtures you can daisy chain together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e13 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e15 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eController Options\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrow Pros UCL's can be controlled using most 0-10V controllers on the market today. When using a TrolMaster controller you will simply need to add a TrolMaster LMA-14. Grow Pros also offers a low-cost controller that has many additional features for controlling UCL's. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIf you are planning on using a simple ON\/OFF timer to control your Under Canopy Lights then you will need a Data Bypass Chip\u003c\/em\u003e to plug into the data side of the power cord. This will make the lights default to 100% ON when they get power from the wall. This chip by-passes the standard commercial setting that defaults the light to 0% OFF until it receives a data signal (from a 0-10V lighting controller) to turn on. This commercial setting prevents lights from turning on in the middle of the night if the data signal or an individual fixture malfunctions. However, without using a Data Bypass Chip or a lighting controller, the fixture will not turn on when it's powered on.\u003c\/p\u003e\n\u003cp\u003eSimply put...\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eIf you plan on using your Under Canopy Lights with a lighting controller (e.g. Trolmaster or any other 0-10V controller) -\u003c\/em\u003e \u003cstrong\u003eyou do not need to purchase a Data Bypass Chip\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eIf you will not be using a lighting controller - \u003c\/em\u003e\u003cstrong\u003eyou must purchase a Data Bypass Chip. \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eLighting Stands\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrow Pros offers optional telescopic stands to keep your UCL's off the floor or bottom of your trays. They facilitate easy installation and secure placement of your UCL's. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWattage: 125W\u003c\/li\u003e\n\u003cli\u003eInput power: 120V-277V \/ 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eColor: 80% Deep Red + Full Spectrum\u003c\/li\u003e\n\u003cli\u003eLifespan: 90% output at 36,000 hours\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 years limited\u003c\/li\u003e\n\u003cli\u003eAmperage:\n\u003cul\u003e\n\u003cli\u003e120V – 1.04A\u003c\/li\u003e\n\u003cli\u003e208V – 0.60A\u003c\/li\u003e\n\u003cli\u003e240V – 0.52A\u003c\/li\u003e\n\u003cli\u003e277V – 0.45A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaisy chain:\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e13 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e15 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grow Pros Solutions","offers":[{"title":"Default Title","offer_id":41879709483093,"sku":"200070","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/grow-pros-4-under-canopy-light-model-2-80-deep-red-spectrum-200070-3321823.png?v=1772724225"},{"product_id":"grow-pros-4-under-canopy-light-model-1-full-spectrum-5-ir-2-pack","title":"Grow Pros 4' Under Canopy Light - Model 1 - Full Spectrum + 5% IR","description":"\u003cp\u003eThe Grow Pros Solutions 4′ under canopy grow lights are designed to provide supplemental light to the lower regions of plants in indoor cultivation environments by strategically placing them beneath the top canopy of plants to ensuring leaves and flowers below the canopy receive optimal light exposure by eliminating shady areas. Under Canopy Grow Lights benefits include uniform light distribution, maximizes yield and denser flower.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDLC Listed, eligible for rebate program from utility companies. Contact us for details\u0026gt;\u0026gt;\u003c\/li\u003e\n\u003cli\u003e4 ft ( 48″ ) 125w Light Bars 2 pcs with 8ft Power Cord 1pc\u003c\/li\u003e\n\u003cli\u003eDesigned for enhancing plant growth and optimizing light availability to less exposed areas\u003c\/li\u003e\n\u003cli\u003eDeploys a lens angle of 120 degrees, from a singular bar design\u003c\/li\u003e\n\u003cli\u003eBuilt-in driver, slim profile\u003c\/li\u003e\n\u003cli\u003eImprove overall quality specially B-bud structure, density, and coloring\u003c\/li\u003e\n\u003cli\u003eMaximize yields with a 25%-40% improvement\u003c\/li\u003e\n\u003cli\u003eUtilizes deep and far red spectrum\u003c\/li\u003e\n\u003cli\u003eOptimized Infrared + full spectrum proven for veg and flowering stages\u003c\/li\u003e\n\u003cli\u003eCompact and lightweight, heavy duty components and quality\u003c\/li\u003e\n\u003cli\u003eEasy to work around during harvest\u003c\/li\u003e\n\u003cli\u003eQuick to uninstall between setting up and taking down runs\u003c\/li\u003e\n\u003cli\u003ePower and data chaining through same connections, no extra components required\u003c\/li\u003e\n\u003cli\u003eAccessories available: Under Canopy Grow Lights Stands, Inter-connect Cable, 120V Power Cord (L-15P) with attached RJ12 Data Cable, 240V commercial power cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"560\" src=\"https:\/\/www.youtube.com\/embed\/NLtaYi8Xzeo?si=qc3eGgGzNI2tT7_h\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIlluminate Growth, Cultivate Brilliance: Grow Pros Solutions Under Canopy Light 4ft\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrowpros Solutions’ under canopy light 4ft are engineered to enhance the yield and color of lower flowers. These supplemental lights effectively enlarge B-buds and C-buds, promoting better growth and development in areas that typically underperform. By targeting the understory, Growpros Solutions ensures a more uniform and abundant harvest, maximizing the potential of every plant.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eMaximize Flowering and THC Concentration\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eUnder canopy lights are designed to illuminate beneath the dense plant canopies where traditional overhead lights struggle to reach. This strategic lighting approach not only boosts the yield but also enhances the quality of your crops by:\u003c\/p\u003e\n\u003cp\u003eIncreasing Flowering: By providing essential light to lower canopy areas, these lights promote more extensive flowering even in the shaded parts of the plant.\u003c\/p\u003e\n\u003cp\u003eEnhancing THC Concentration: The added light spectrum encourages the development of THC and terpene compounds, improving the potency and profile of your harvest.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003eSpectrum Balancing for Optimal Growth\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003eTo achieve these benefits, it’s crucial to select the right spectrum based on your existing setup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eModel 1 Lights: Ideal for complementing HID top lights, which are rich in ROY (red, orange, yellow) spectrums.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 14px;\"\u003eModel 2 Lights: Best paired with full spectrum LED top lights to ensure comprehensive coverage.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis customization allows growers to balance light spectrums effectively, ensuring that every plant receives the optimal wavelengths necessary for peak growth and quality. By integrating these advanced lighting solutions, you can achieve not only increased yields but also superior product quality, setting your harvest apart in both appearance and chemical composition.\u003c\/p\u003e\n\u003cp\u003eA solution was needed when addressing the hindered development of lower buds and leaves on plants grown where limited lighting reaches beneath the top canopy. It was found that the strategic installation of under-canopy grow lights improves overall plant development.\u003c\/p\u003e\n\u003cp\u003eThe Grow Pros Solutions 125W under canopy light 4ft have been developed by assessing SMD (Surface Mount Device) chips and drivers from leading manufacturers in controlled test applications and cultivation facilities. It’s IR spectrum penetrate deep into the plant canopy, sparking life in lower regions of the canopy and nurturing robust growth from top to bottom.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow to Determine How Many Power Cords and Interconnect Cables to Order\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOne pair of 4' UCL's are designed to cover a 4' x 4' area. Each UCL has a short, flexible pigtail that allows you to daisy-chain multiple fixtures together (both power and data\/dimming). So if you will be running multiple fixtures in a straight line and the fixtures will be very close to each other end-to-end, you would only need a single power cord and no extension cables.\u003c\/p\u003e\n\u003cp\u003eCommon configurations\/examples:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4' x 4' space: this would require (1) pair of UCL's, (1) power cord and (1) interconnect cable, since the two fixtures will be spaced a couple of feet apart, which is longer than the pigtails on the fixtures themselves.\u003c\/li\u003e\n\u003cli\u003e4' x 8' space: this would require (2) pair of UCL's, (1) power cord and (1) interconnect cable. Each pair of UCL's would be daisy-chained together using the attached pigtails to make an 8' long light, and the interconnect cable would join the first 8' section on one side of the space to the second 8' section on the other side. All four fixtures would be powered by the same power cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNow that you understand how the fixtures daisy chain together and how the interconnect cables are used, you can see how easy it is to expand this to larger spaces, custom benches, etc. Keep in mind there is a limit to how many fixtures you can daisy chain together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e13 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e15 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eController Options\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrow Pros UCL's can be controlled using most 0-10V controllers on the market today. When using a TrolMaster controller you will simply need to add a TrolMaster LMA-14. Grow Pros also offers a low-cost controller that has many additional features for controlling UCL's.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIf you are planning on using a simple ON\/OFF timer to control your Under Canopy Lights then you will need a Data Bypass Chip\u003c\/em\u003e to plug into the data side of the power cord. This will make the lights default to 100% ON when they get power from the wall. This chip by-passes the standard commercial setting that defaults the light to 0% OFF until it receives a data signal (from a 0-10V lighting controller) to turn on. This commercial setting prevents lights from turning on in the middle of the night if the data signal or an individual fixture malfunctions. However, without using a Data Bypass Chip or a lighting controller, the fixture will not turn on when it's powered on.\u003c\/p\u003e\n\u003cp\u003eSimply put...\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eIf you plan on using your Under Canopy Lights with a lighting controller (e.g. TrolMaster or any other 0-10V controller) -\u003c\/em\u003e \u003cstrong\u003eyou do not need to purchase a Data Bypass Chip\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eIf you will not be using a lighting controller - \u003c\/em\u003e\u003cstrong\u003eyou must purchase a Data Bypass Chip. \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse Grow Pros 2-way or 3-way data splitters to control all under-canopy lights with a single controller. These splitters efficiently distribute control signals, simplifying your installation and enhancing system performance. They are designed for seamless integration with your existing lighting setup.\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/grow-pros-ucl-model-1-dimming.jpg?v=1767934878\" alt=\"Dimming\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003ch4\u003e\u003cstrong\u003eLighting Stands\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrow Pros offers optional telescopic stands to keep your UCL's off the floor or bottom of your trays. They facilitate easy installation and secure placement of your UCL's.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat is the difference between Model 1 and Model 2 lights in terms of spectrum and compatibility?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWhen choosing between Model 1 and Model 2 lights, understanding their differences in spectrum and compatibility is essential for optimizing plant growth.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel 1 Lights: These lights are tailored to enhance particular growth phases by incorporating 20% red light in their spectrum. This balance is perfect for nurturing phases that require a boost in the red spectrum.\u003c\/li\u003e\n\u003cli\u003eModel 2 Lights: Stand out with a striking 80% red light composition, Model 2 lights are engineered to significantly enhance flowering and fruiting stages. This robust red spectrum is optimal for producing the desired results during these critical growth phases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility Factors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel 1 Lights: Ideally used with Single Channel Full spectrum top lights. This pairing allows Model 1 lights to complement Single Channel LED Grow Lights Full spectrum, particularly enriching it with red light.\u003c\/li\u003e\n\u003cli\u003eModel 2 Lights: Best suited for use with full-spectrum LED top lights. The high concentration of red light from Model 2 beautifully complements Growpros Beast Series 2 channels full-spectrum LED Grow Lights, providing plants with a balanced lighting environment conducive to all-around growth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBy choosing the right model for your lighting setup, you can effectively cater to the specific needs of your plants throughout different stages of growth.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWattage: 125W\u003c\/li\u003e\n\u003cli\u003eInput power: 120V-277V \/ 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eColor: Full Spectrum + Infrared\u003c\/li\u003e\n\u003cli\u003eLifespan: 90% output at 36,000 hours\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 years limited\u003c\/li\u003e\n\u003cli\u003eAmperage:\n\u003cul\u003e\n\u003cli\u003e120V – 1.04A\u003c\/li\u003e\n\u003cli\u003e208V – 0.60A\u003c\/li\u003e\n\u003cli\u003e240V – 0.52A\u003c\/li\u003e\n\u003cli\u003e277V – 0.45A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaisy chain:\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e13 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e15 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/grow-pros-ucl-model-1-dimensions.jpg?v=1767934878\" alt=\"Dimensions\" style=\"float: none;\"\u003e\u003c\/div\u003e","brand":"Grow Pros Solutions","offers":[{"title":"Default Title","offer_id":41879709515861,"sku":"200060","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/grow-pros-4-under-canopy-light-model-1-full-spectrum-5-ir-2-pack-200060-2705748.png?v=1767477130"},{"product_id":"grow-pros-4-under-canopy-light-model-3-dual-channel-full-spectrum-uv-ir-2-pack","title":"Grow Pros 4' Under Canopy Light - Model 3 - Dual Channel - Full Spectrum + UV + IR","description":"\u003cp\u003eThe Grow Pros Solutions 4′ under canopy light red spectrum version are designed to provide supplemental light to the lower regions of plants in indoor cultivation environments by strategically placing them beneath the top canopy of plants to ensuring leaves and flowers below the canopy receive optimal light exposure by eliminating shady areas. Under Canopy Grow Lights benefits include uniform light distribution,  maximizes yield and denser flower.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDLC Listed, eligible for rebate program from unity companies - contact us for details\u003c\/li\u003e\n\u003cli\u003eDesigned for enhancing plant growth and optimizing light availability to less exposed areas\u003c\/li\u003e\n\u003cli\u003eDeploys a lens angle of 120 degrees, from a singular bar design\u003c\/li\u003e\n\u003cli\u003eBuilt-in driver, slim profile\u003c\/li\u003e\n\u003cli\u003eImprove overall quality specially B-bud structure, density, and coloring\u003c\/li\u003e\n\u003cli\u003eMaximize yields with a 25%-30% improvement\u003c\/li\u003e\n\u003cli\u003eUtilizes deep and far red spectrum\u003c\/li\u003e\n\u003cli\u003eOptimized Infrared + full spectrum proven for veg and flowering stages\u003c\/li\u003e\n\u003cli\u003eCompact and lightweight, heavy duty components and quality\u003c\/li\u003e\n\u003cli\u003eEasy to work around during harvest\u003c\/li\u003e\n\u003cli\u003eQuick to uninstall between setting up and taking down runs\u003c\/li\u003e\n\u003cli\u003ePower and data chaining through same connections, no extra components required\u003c\/li\u003e\n\u003cli\u003eAccessories available: Under Canopy Grow Lights Stands, Interconnect Cable, 120V Power Cord (L-15P) with attached RJ12 Data Cable, 240V commercial power cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Grow Pros Solutions 150W 4′ under canopy grow lights have been developed by assessing SMD (Surface Mount Device) chips and drivers from leading manufacturers in controlled test applications and cultivation facilities. It’s IR spectrum penetrate deep into the plant canopy, sparking life in lower regions of the canopy and nurturing robust growth from top to bottom.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow to Determine How Many Power Cords and Interconnect Cables to Order\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOne pair of 4' UCL's are designed to cover a 4' x 4' area. Each UCL has a short, flexible pigtail that allows you to daisy-chain multiple fixtures together (both power and data\/dimming). So if you will be running multiple fixtures in a straight line and the fixtures will be very close to each other end-to-end, you would only need a single power cord and no extension cables.\u003c\/p\u003e\n\u003cp\u003eCommon configurations\/examples:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4' x 4' space: this would require (1) pair of UCL's, (1) power cord and (1) interconnect cable, since the two fixtures will be spaced a couple of feet apart, which is longer than the pigtails on the fixtures themselves.\u003c\/li\u003e\n\u003cli\u003e4' x 8' space: this would require (2) pair of UCL's, (1) power cord and (1) interconnect cable. Each pair of UCL's would be daisy-chained together using the attached pigtails to make an 8' long light, and the interconnect cable would join the first 8' section on one side of the space to the second 8' section on the other side. All four fixtures would be powered by the same power cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNow that you understand how the fixtures daisy chain together and how the interconnect cables are used, you can see how easy it is to expand this to larger spaces, custom benches, etc. Keep in mind there is a limit to how many fixtures you can daisy chain together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e12 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e14 pcs @ 220V\u003c\/li\u003e\n\u003cli\u003e16 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eController Options\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrow Pros UCL's can be controlled using most 0-10V controllers on the market today. When using a TrolMaster controller you will simply need to add a TrolMaster LMA-14. Grow Pros also offers a low-cost controller that has many additional features for controlling UCL's. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIf you are planning on using a simple ON\/OFF timer to control your Under Canopy Lights then you will need a Data Bypass Chip\u003c\/em\u003e to plug into the data side of the power cord. This will make the lights default to 100% ON when they get power from the wall. This chip by-passes the standard commercial setting that defaults the light to 0% OFF until it receives a data signal (from a 0-10V lighting controller) to turn on. This commercial setting prevents lights from turning on in the middle of the night if the data signal or an individual fixture malfunctions. However, without using a Data Bypass Chip or a lighting controller, the fixture will not turn on when it's powered on.\u003c\/p\u003e\n\u003cp\u003eSimply put...\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eIf you plan on using your Under Canopy Lights with a lighting controller (e.g. Trolmaster or any other 0-10V controller) -\u003c\/em\u003e \u003cstrong\u003eyou do not need to purchase a Data Bypass Chip\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eIf you will not be using a lighting controller - \u003c\/em\u003e\u003cstrong\u003eyou must purchase a Data Bypass Chip. \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eLighting Stands\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrow Pros offers optional telescopic stands to keep your UCL's off the floor or bottom of your trays. They facilitate easy installation and secure placement of your UCL's. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWattage: 150W Dual Channel (75W \/ 75W)\u003c\/li\u003e\n\u003cli\u003eInput power: 120V-277V \/ 50\/60Hz\u003c\/li\u003e\n\u003cli\u003ePPF: 450 μmol\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eColor: Blue + White + UVA \/ Red + IR + White Spectrum\u003c\/li\u003e\n\u003cli\u003eLifespan: 90% output at 36,000 hours\u003c\/li\u003e\n\u003cli\u003eWorking Temperature: 0ºF to 104ºF\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 years limited\u003c\/li\u003e\n\u003cli\u003eAmperage:\n\u003cul\u003e\n\u003cli\u003e120V – 1.28A\u003c\/li\u003e\n\u003cli\u003e208V – 0.73A\u003c\/li\u003e\n\u003cli\u003e220V – 0.67A\u003c\/li\u003e\n\u003cli\u003e240V – 0.63A\u003c\/li\u003e\n\u003cli\u003e277V – 0.54A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaisy chain:\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e12 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e14 pcs @ 220V\u003c\/li\u003e\n\u003cli\u003e16 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grow Pros Solutions","offers":[{"title":"Default Title","offer_id":41879709548629,"sku":"202970","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/grow-pros-4-under-canopy-light-model-3-dual-channel-full-spectrum-uv-ir-2-pack-202970-9829047.png?v=1767477130"},{"product_id":"grow-pros-4-under-canopy-light-model-4-dual-channel-80-red-ir-2-pack","title":"Grow Pros 4' Under Canopy Light - Model 4 - Dual Channel - 80% Red + IR - 2-PACK","description":"\u003cp\u003eThe GrowPros Solutions Viper Under Canopy Light 4ft is designed to provide supplemental light to the lower regions of plants in indoor cultivation environments. By strategically placing Vipers beneath the canopy of the plants previously low yielding shaded areas now receive the ideal amount of light intensity, making bigger and more potent flowers.\u003c\/p\u003e\n\u003cp\u003eThe main 125w Full Spectrum channel has the perfect proven spectrum and intensity to eliminate C buds and increase the size and yield of the A and B buds.\u003c\/p\u003e\n\u003cp\u003eThe 25w independent Infrared channel not only increases the light penetration up through the canopy, it also allows for growers to trigger the “Emerson Effect”.\u003c\/p\u003e\n\u003cp\u003eBy providing pure infrared light for a short time at the beginning of the dark cycle growers can stimulate a faster hormone switch in the plants which will shorten the transition period between Vegetative and Flowering stages of the plant.\u003c\/p\u003e\n\u003cp\u003eBud sites can set and start developing up to 1-2 weeks faster which leads to earlier harvesting.\u003c\/p\u003e\n\u003cp\u003eThe Viper has multiple benefits that make return on investment super-fast and smart business decision.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAdapted with 120V power cord or 240V power cord *Sold Separately*\u003c\/li\u003e\n\u003cli\u003eIncreased Over All Yield – 25%-40%\u003c\/li\u003e\n\u003cli\u003eMore Uniform Maturity across depth of canopy\u003c\/li\u003e\n\u003cli\u003eLess labor required in striping of under canopy\u003c\/li\u003e\n\u003cli\u003eLess labor required in sorting and trimming\u003c\/li\u003e\n\u003cli\u003eIncrease in A and B buds means a higher value per pound\u003c\/li\u003e\n\u003cli\u003eIncrease in grams per cubic foot of canopy\u003c\/li\u003e\n\u003cli\u003eShortening of Flowering time – more harvest per year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIlluminate Growth, Cultivate Brilliance: Grow Pros Solutions Under Canopy Lights Red Spectrum Model 4\u003c\/h4\u003e\n\u003cp\u003eGrowpros Solutions’ first-ever under canopy lights dual channel are engineered to enhance the yield and color of lower flowers. These supplemental lights cab significantly effectively enlarge B-buds and C-buds, promoting better growth and development in areas that typically underperform. By targeting the understory, Growpros Solutions ensures a more uniform and abundant harvest, maximizing the potential of every plant.\u003c\/p\u003e\n\u003cp\u003eA solution was needed when addressing the hindered development of lower buds and leaves on plants grown where limited lighting reaches beneath the top canopy. It was found that the strategic installation of under-canopy grow lights improves overall plant development.\u003c\/p\u003e\n\u003cp\u003eThe GrowPros Solutions 150W 4′ Under Canopy Grow Lights Model 4 Dual Channel have been meticulously designed by hydro growers for hydro growers. This innovative lighting system features two channels: one 125 Watt channel with a Red + White spectrum and the other with an 25 Watt IR spectrum. Both channels are dimmable, allowing for precise control over light intensity to meet the specific needs of your plants at important growth stages.\u003c\/p\u003e\n\u003cp\u003eAdditionally, these grow lights are DLC and ETL listed, making them eligible for energy rebates under most utility rebate programs. This ensures not only superior performance but also cost savings on energy bills.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow to Determine How Many Power Cords and Interconnect Cables to Order\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOne pair of 4' UCL's are designed to cover a 4' x 4' area. Each UCL has a short, flexible pigtail that allows you to daisy-chain multiple fixtures together (both power and data\/dimming). So if you will be running multiple fixtures in a straight line and the fixtures will be very close to each other end-to-end, you would only need a single power cord and no extension cables.\u003c\/p\u003e\n\u003cp\u003eCommon configurations\/examples:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4' x 4' space: this would require (1) pair of UCL's, (1) power cord and (1) interconnect cable, since the two fixtures will be spaced a couple of feet apart, which is longer than the pigtails on the fixtures themselves.\u003c\/li\u003e\n\u003cli\u003e4' x 8' space: this would require (2) pair of UCL's, (1) power cord and (1) interconnect cable. Each pair of UCL's would be daisy-chained together using the attached pigtails to make an 8' long light, and the interconnect cable would join the first 8' section on one side of the space to the second 8' section on the other side. All four fixtures would be powered by the same power cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNow that you understand how the fixtures daisy chain together and how the interconnect cables are used, you can see how easy it is to expand this to larger spaces, custom benches, etc. Keep in mind there is a limit to how many fixtures you can daisy chain together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e12 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e14 pcs @ 220V\u003c\/li\u003e\n\u003cli\u003e16 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eController Options\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrow Pros UCL's can be controlled using most 0-10V controllers on the market today. When using a TrolMaster controller you will simply need to add a TrolMaster LMA-14. Grow Pros also offers a low-cost controller that has many additional features for controlling UCL's. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIf you are planning on using a simple ON\/OFF timer to control your Under Canopy Lights then you will need a Data Bypass Chip\u003c\/em\u003e to plug into the data side of the power cord. This will make the lights default to 100% ON when they get power from the wall. This chip by-passes the standard commercial setting that defaults the light to 0% OFF until it receives a data signal (from a 0-10V lighting controller) to turn on. This commercial setting prevents lights from turning on in the middle of the night if the data signal or an individual fixture malfunctions. However, without using a Data Bypass Chip or a lighting controller, the fixture will not turn on when it's powered on.\u003c\/p\u003e\n\u003cp\u003eSimply put...\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eIf you plan on using your Under Canopy Lights with a lighting controller (e.g. Trolmaster or any other 0-10V controller) -\u003c\/em\u003e \u003cstrong\u003eyou do not need to purchase a Data Bypass Chip\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eIf you will not be using a lighting controller - \u003c\/em\u003e\u003cstrong\u003eyou must purchase a Data Bypass Chip. \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eLighting Stands\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGrow Pros offers optional telescopic stands to keep your UCL's off the floor or bottom of your trays. They facilitate easy installation and secure placement of your UCL's. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWattage: 150W Dual Channel (125W \/ 25W)\u003c\/li\u003e\n\u003cli\u003eInput power: 120V-277V \/ 50\/60Hz\u003c\/li\u003e\n\u003cli\u003ePPF: 450 μmol\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eColor: Red + White \/ IR\u003c\/li\u003e\n\u003cli\u003eLifespan: 90% output at 36,000 hours\u003c\/li\u003e\n\u003cli\u003eWorking Temperature: 0ºF to 104ºF\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 years limited\u003c\/li\u003e\n\u003cli\u003eAmperage:\n\u003cul\u003e\n\u003cli\u003e120V – 1.28A\u003c\/li\u003e\n\u003cli\u003e208V – 0.73A\u003c\/li\u003e\n\u003cli\u003e220V – 0.68A\u003c\/li\u003e\n\u003cli\u003e240V – 0.63A\u003c\/li\u003e\n\u003cli\u003e277V – 0.53A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaisy chain:\n\u003cul\u003e\n\u003cli\u003e8pcs @ 120V\u003c\/li\u003e\n\u003cli\u003e12 pcs @ 208V\u003c\/li\u003e\n\u003cli\u003e14 pcs @ 220V\u003c\/li\u003e\n\u003cli\u003e16 pcs @ 240V\u003c\/li\u003e\n\u003cli\u003e18 pcs @ 277V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grow Pros Solutions","offers":[{"title":"Default Title","offer_id":41879709581397,"sku":"202990","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/grow-pros-4-under-canopy-light-model-4-dual-channel-80-red-ir-2-pack-202990-2656570.png?v=1767477130"},{"product_id":"fluence-spydr-2r-led-grow-light-system","title":"Fluence SPYDR 2r LED Grow Light System","description":"\u003cp\u003eThe Fluence SPYDR 2r LED Grow Light is an advanced lighting solution designed specifically for craft herb cultivators. It offers a powerful 1600 µmol\/s PPF output, ideal for micro-growers aiming to optimize their harvest. Equipped with the PhysioSpec™ Broad R4 spectrum, the SPYDR 2r ensures balanced, full-cycle cultivation, while the included 0-100% dimmer provides precise control over light intensity throughout the growth stages. This high performance grow light is tailored for those seeking to command their indoor growing environment with efficiency and ease.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBroad R4 (PhysioSpec Indoor) \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e This is the standard mounting option, and is included free with your purchase of a SPYDR 2r. Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCord Options:\u003c\/strong\u003e The SPYDR 2r ships with a 6' long 120V (NEMA 5) power cord. Additional cords are available for purchase separately, including 15' long cords and cords with other plug types. SPYDR 2r fixtures are compatible with all Fluence SPYDR 2 power cords (e.g. 2x, 2p, 2i and 2h power cords).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1600 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 626 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.5\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 24.8 lbs\u003c\/li\u003e\n\u003cli\u003eSpectrum: Broad R4\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8\" in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SPYDR 2r fixture ships with an autosensing 100-277V power supply.\u003c\/strong\u003e\u003c\/em\u003e Amperage depends on fixture wattage and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.32A\u003c\/li\u003e\n\u003cli\u003eAmps @ 230\/240V: 2.79A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.34A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSPYDR 2r systems are guaranteed against manufacturing defects for five years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr-comparison-1.png?v=1767933728\" alt=\"SPYDR Comparison Chart\" style=\"float: none;\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879709646933,"sku":"619700","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2r-led-grow-light-system-619700-2803582.jpg?v=1767477128"},{"product_id":"floraflex-900w-full-spectrum-led-grow-light","title":"FloraFlex 900w Full Spectrum LED Grow Light","description":"\u003ch3\u003ePowerful. Affordable. Bright.\u003c\/h3\u003e\n\u003cp\u003eThe ultimate grow light with the most advanced full spectrum custom diodes ever built in a 900 Watt LED.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo Tools Required for Assembly\u003c\/li\u003e\n\u003cli\u003eSelf-Assembly in Under 5 Minutes\u003c\/li\u003e\n\u003cli\u003e10-Bar Design for Optimal Light Distribution\u003c\/li\u003e\n\u003cli\u003eDaisy Chain Capable\u003c\/li\u003e\n\u003cli\u003eDesigned for Maximum Plant Health and Yield\u003c\/li\u003e\n\u003cli\u003eLightweight and Easy to Install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source: LED\u003c\/li\u003e\n\u003cli\u003eVeg Coverage: 5' x 5'\u003c\/li\u003e\n\u003cli\u003eBloom Coverage: 4' x 4'\u003c\/li\u003e\n\u003cli\u003eLight Output PPF: 2430 µmol\/s\u003c\/li\u003e\n\u003cli\u003eEfficacy PPE: 2.7 µmol\/J\u003c\/li\u003e\n\u003cli\u003eAC Input Power: 900W\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 120-277V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eLight Distribution: 120°\u003c\/li\u003e\n\u003cli\u003eMounting Height: 12\" - 24\" (30.48cm - 60.96cm)\u003c\/li\u003e\n\u003cli\u003eThermal Management: Passive\u003c\/li\u003e\n\u003cli\u003eMax Ambient Temperature: 95°F \/ 35°C\u003c\/li\u003e\n\u003cli\u003eDimming: 0-10V\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): 15%\u003c\/li\u003e\n\u003cli\u003eLifetime: L90 \u0026gt; 50,000hrs\u003c\/li\u003e\n\u003cli\u003eCertifications: DLC, UL 8800, UL 1598\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 Year Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FloraFlex","offers":[{"title":"120V","offer_id":41879709712469,"sku":"6212-173_69","price":422.99,"currency_code":"USD","in_stock":true},{"title":"240V","offer_id":41879709745237,"sku":"6212-174_69","price":422.99,"currency_code":"USD","in_stock":true},{"title":"277V","offer_id":41879709778005,"sku":"6212-175_69","price":422.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-900w-full-spectrum-led-grow-light-120v-6212-173-69-8830168.jpg?v=1767477130"},{"product_id":"floraflex-400w-full-spectrum-led-grow-light","title":"FloraFlex 400w Full Spectrum LED Grow Light","description":"\u003ch3\u003ePowerful. Affordable. Bright.\u003c\/h3\u003e\n\u003cp\u003eThe ultimate grow light with the most advanced full spectrum custom diodes ever built in a 400 Watt LED.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo Tools Required for Assembly\u003c\/li\u003e\n\u003cli\u003eSelf-Assembly in Under 5 Minutes\u003c\/li\u003e\n\u003cli\u003e5-Bar Design for Optimal Light Distribution\u003c\/li\u003e\n\u003cli\u003eDaisy Chain Capable\u003c\/li\u003e\n\u003cli\u003eDesigned for Maximum Plant Health and Yield\u003c\/li\u003e\n\u003cli\u003eLightweight and Easy to Install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source: LED\u003c\/li\u003e\n\u003cli\u003eVeg Coverage: 5' x 5'\u003c\/li\u003e\n\u003cli\u003eBloom Coverage: 4' x 4'\u003c\/li\u003e\n\u003cli\u003eLight Output PPF: 1080 µmol\/s\u003c\/li\u003e\n\u003cli\u003eEfficacy PPE: 2.7 µmol\/J\u003c\/li\u003e\n\u003cli\u003eAC Input Power: 400W\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 120-277V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eLight Distribution: 120°\u003c\/li\u003e\n\u003cli\u003eMounting Height: 12\" - 24\" (30.48cm - 60.96cm)\u003c\/li\u003e\n\u003cli\u003eThermal Management: Passive\u003c\/li\u003e\n\u003cli\u003eMax Ambient Temperature: 95°F \/ 35°C\u003c\/li\u003e\n\u003cli\u003eDimming: 0-10V\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): 15%\u003c\/li\u003e\n\u003cli\u003eLifetime: L90 \u0026gt; 50,000hrs\u003c\/li\u003e\n\u003cli\u003eCertifications: DLC, UL 8800, UL 1598\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 Year Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FloraFlex","offers":[{"title":"120V","offer_id":41879709810773,"sku":"6213-173_69","price":258.01,"currency_code":"USD","in_stock":true},{"title":"240V","offer_id":41879709843541,"sku":"6213-174_69","price":258.01,"currency_code":"USD","in_stock":true},{"title":"277V","offer_id":41879709876309,"sku":"6213-175_69","price":258.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-400w-full-spectrum-led-grow-light-120v-6213-173-69-8328712.jpg?v=1767477130"},{"product_id":"floraflex-680w-hig-bay-full-spectrum-led-grow-light","title":"FloraFlex 680w Hig Bay Full Spectrum LED Grow Light","description":"\u003ch3\u003eFull Spectrum Custom Diodes\u003c\/h3\u003e\n\u003cp\u003eThe FloraFlex 680W High Bay Full Spectrum LED Grow Light features a comprehensive spectrum range, including 3000K for promoting plant germination, 5000K to boost flowering, 660nm red for flowering, and 730nm far red to improve yields, ensuring optimal growth at every stage.\u003c\/p\u003e\n\u003ch3\u003ePar Distribution + Penetration\u003c\/h3\u003e\n\u003cp\u003eEach FloraFlex 680W High Bay light undergoes rigorous testing to ensure unmatched quality before it's packaged and delivered to you. Each High Bay LED delivers a center reading of 1242 PPFD at a height of 24 inces.\u003c\/p\u003e","brand":"FloraFlex","offers":[{"title":"120V","offer_id":41879710695509,"sku":"6214-173_69","price":498.75,"currency_code":"USD","in_stock":true},{"title":"240V","offer_id":41879710728277,"sku":"6214-174_69","price":498.75,"currency_code":"USD","in_stock":true},{"title":"277V","offer_id":41879710761045,"sku":"6214-175_69","price":498.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-680w-hig-bay-full-spectrum-led-grow-light-120v-6214-173-69-7693876.jpg?v=1767477130"},{"product_id":"floraflex-3-bar-360w-far-red-under-canopy-led-grow-light","title":"FloraFlex 3-Bar 360W Far Red Under Canopy LED Grow Light","description":"\u003ch3\u003eFull Spectrum Custom Diodes\u003c\/h3\u003e\n\u003cp\u003eFloraFlex 360W LED Under-Canopy Grow Lights feature industry-leading far-red custom diodes. They deliver unmatched efficacy at 3.3 micromoles per joule - boosting flowering, enhancing photosynthesis, and optimizing your yields like never before.\u003c\/p\u003e\n\u003ch3\u003ePar Distribution + Penetration\u003c\/h3\u003e\n\u003cp\u003eEach FloraFlex 360W LED Under-Canopy Grow Light undergoes rigorous testing to ensure unmatched quality before it's packaged and delivered to you. Each 3-bar setup delivers a center reading of 780 PPFD at a height of 12 inces.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStands sold separately.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source: LED\u003c\/li\u003e\n\u003cli\u003eLight Output PPF: 1188 µmol\/s\u003c\/li\u003e\n\u003cli\u003eEfficacy PPE: 3.3 µmol\/J\u003c\/li\u003e\n\u003cli\u003eAC Input Power: 360W (Adjustable from 100W-360W)\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 120V-277V AV, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eLight Distribution: 120°\u003c\/li\u003e\n\u003cli\u003eCoverage: 4' x 4' - 4' x 6'\u003c\/li\u003e\n\u003cli\u003eChips: Full Spectrum Custom Diodes + Osram 6.24\u003c\/li\u003e\n\u003cli\u003eCord Length Between Bars: 24 inches\u003c\/li\u003e\n\u003cli\u003eThermal Management: Passive\u003c\/li\u003e\n\u003cli\u003eMax Ambient Temperature: 95°F \/ 35°C\u003c\/li\u003e\n\u003cli\u003eDimming: 0 - 10V\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): 15%\u003c\/li\u003e\n\u003cli\u003eLifetime: L90 \u0026gt; 50,000 hours\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eCertifications: ETL, DLC\u003c\/li\u003e\n\u003cli\u003eWarranty: 10-Year Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FloraFlex","offers":[{"title":"120V","offer_id":41879710859349,"sku":"6215-173_69","price":437.88,"currency_code":"USD","in_stock":true},{"title":"240V","offer_id":41879710892117,"sku":"6215-174_69","price":437.88,"currency_code":"USD","in_stock":true},{"title":"277V","offer_id":41879710924885,"sku":"6215-175_69","price":437.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-3-bar-360w-far-red-under-canopy-led-grow-light-120v-6215-173-69-3918645.jpg?v=1767477132"},{"product_id":"floraflex-3-bar-360w-full-spectrum-under-canopy-led-grow-light","title":"FloraFlex 3-Bar 360W Full Spectrum Under Canopy LED Grow Light","description":"\u003ch3\u003eFull Spectrum Custom Diodes\u003c\/h3\u003e\n\u003cp\u003eFloraFlex 360W LED Under-Canopy Grow Lights feature industry-leading far-red custom diodes. They deliver unmatched efficacy at 2.7 micromoles per joule - boosting flowering, enhancing photosynthesis, and optimizing your yields like never before.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStands sold separately.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source: LED\u003c\/li\u003e\n\u003cli\u003eLight Output PPF: 1188 µmol\/s\u003c\/li\u003e\n\u003cli\u003eEfficacy PPE: 3.3 µmol\/J\u003c\/li\u003e\n\u003cli\u003eAC Input Power: 360W (Adjustable from 100W-360W)\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 120V-277V AV, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eLight Distribution: 120°\u003c\/li\u003e\n\u003cli\u003eCoverage: 4' x 4' - 4' x 6'\u003c\/li\u003e\n\u003cli\u003eChips: Full Spectrum Custom Diodes + Osram 6.24\u003c\/li\u003e\n\u003cli\u003eCord Length Between Bars: 24 inches\u003c\/li\u003e\n\u003cli\u003eThermal Management: Passive\u003c\/li\u003e\n\u003cli\u003eMax Ambient Temperature: 95°F \/ 35°C\u003c\/li\u003e\n\u003cli\u003eDimming: 0 - 10V\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): 15%\u003c\/li\u003e\n\u003cli\u003eLifetime: L90 \u0026gt; 50,000 hours\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eCertifications: ETL, DLC\u003c\/li\u003e\n\u003cli\u003eWarranty: 10-Year Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FloraFlex","offers":[{"title":"120V","offer_id":41879710957653,"sku":"6216-173_69","price":208.51,"currency_code":"USD","in_stock":true},{"title":"240V","offer_id":41879710990421,"sku":"6216-174_69","price":208.51,"currency_code":"USD","in_stock":true},{"title":"277V","offer_id":41879711023189,"sku":"6216-175_69","price":208.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-3-bar-360w-full-spectrum-under-canopy-led-grow-light-120v-6216-173-69-1348642.jpg?v=1767477131"},{"product_id":"floraflex-under-canopy-adjustable-stand","title":"FloraFlex Under Canopy Adjustable Stand - 12.5\" - 22.5\"","description":"\u003cp\u003eFloraFlex Under Canopy Adjustable Stands allow for precise height adjustments from 12.5 inches up to 22.5 inches.\u003c\/p\u003e","brand":"FloraFlex","offers":[{"title":"Default Title","offer_id":41879711121493,"sku":"6217","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-under-canopy-adjustable-stand-125-225-6217-2036535.jpg?v=1767477129"},{"product_id":"floraflex-6-bar-720w-far-red-under-canopy-led-grow-light","title":"FloraFlex 6-Bar 720W Far Red Under Canopy LED Grow Light","description":"\u003ch3\u003eFull Spectrum Custom Diodes\u003c\/h3\u003e\n\u003cp\u003eFloraFlex 720W LED Under-Canopy Grow Lights feature industry-leading far-red custom diodes. They deliver unmatched efficacy at 3.3 micromoles per joule - boosting flowering, enhancing photosynthesis, and optimizing your yields like never before.\u003c\/p\u003e\n\u003ch3\u003ePar Distribution + Penetration\u003c\/h3\u003e\n\u003cp\u003eEach FloraFlex 720W LED Under-Canopy Grow Light undergoes rigorous testing to ensure unmatched quality before it's packaged and delivered to you. Each 3-bar setup delivers a center reading of 780 PPFD at a height of 12 inces.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStands sold separately.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source: LED\u003c\/li\u003e\n\u003cli\u003eLight Output PPF: 2376 µmol\/s\u003c\/li\u003e\n\u003cli\u003eEfficacy PPE: 3.3 µmol\/J\u003c\/li\u003e\n\u003cli\u003eAC Input Power: 720W (Adjustable from 100W-720W)\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 120V-277V AV, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eLight Distribution: 120°\u003c\/li\u003e\n\u003cli\u003eCoverage: 4' x 8' - 4' x 12'\u003c\/li\u003e\n\u003cli\u003eChips: Full Spectrum Custom Diodes + Osram 6.24\u003c\/li\u003e\n\u003cli\u003eCord Length Between Bars: 24 inches\u003c\/li\u003e\n\u003cli\u003eThermal Management: Passive\u003c\/li\u003e\n\u003cli\u003eMax Ambient Temperature: 95°F \/ 35°C\u003c\/li\u003e\n\u003cli\u003eDimming: 0 - 10V\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): 15%\u003c\/li\u003e\n\u003cli\u003eLifetime: L90 \u0026gt; 5000 hours\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eCertifications: ETL, DLC\u003c\/li\u003e\n\u003cli\u003eWarranty: 10-Year Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FloraFlex","offers":[{"title":"120V","offer_id":41879711154261,"sku":"6218-173_69","price":788.88,"currency_code":"USD","in_stock":true},{"title":"240V","offer_id":41879711187029,"sku":"6218-174_69","price":788.88,"currency_code":"USD","in_stock":true},{"title":"277V","offer_id":41879711219797,"sku":"6218-175_69","price":788.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-6-bar-720w-far-red-under-canopy-led-grow-light-120v-6218-173-69-2833721.jpg?v=1767477131"},{"product_id":"floraflex-6-bar-720w-full-spectrum-under-canopy-led-grow-light","title":"FloraFlex 6-Bar 720W Full Spectrum Under Canopy LED Grow Light","description":"\u003ch3\u003eFull Spectrum Custom Diodes\u003c\/h3\u003e\n\u003cp\u003eFloraFlex 720W LED Under-Canopy Grow Lights feature industry-leading far-red custom diodes. They deliver unmatched efficacy at 3.3 micromoles per joule - boosting flowering, enhancing photosynthesis, and optimizing your yields like never before.\u003c\/p\u003e\n\u003ch3\u003ePar Distribution + Penetration\u003c\/h3\u003e\n\u003cp\u003eEach FloraFlex 720W LED Under-Canopy Grow Light undergoes rigorous testing to ensure unmatched quality before it's packaged and delivered to you. Each 3-bar setup delivers a center reading of 780 PPFD at a height of 12 inces.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStands sold separately.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Source: LED\u003c\/li\u003e\n\u003cli\u003eLight Output PPF: 1,948 µmol\/s\u003c\/li\u003e\n\u003cli\u003eEfficacy PPE: 2.7 µmol\/J\u003c\/li\u003e\n\u003cli\u003eAC Input Power: 720W\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 120V-277V AV, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eLight Distribution: 120°\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4' x 8' - 4' x 12'\u003c\/li\u003e\n\u003cli\u003eChips: FloraFlex Custom Full Spectrum + Osram Reds\u003c\/li\u003e\n\u003cli\u003eThermal Management: Passive\u003c\/li\u003e\n\u003cli\u003eMax Ambient Temperature: 95°F (35°C)\u003c\/li\u003e\n\u003cli\u003eDimming: 0-10V\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): 15%\u003c\/li\u003e\n\u003cli\u003eLifetime: L90 \u0026gt; 50,000 hours\u003c\/li\u003e\n\u003cli\u003eIP Rating: IP65\u003c\/li\u003e\n\u003cli\u003eCertifications: ETL, DLC\u003c\/li\u003e\n\u003cli\u003eWarranty: 10-Year Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FloraFlex","offers":[{"title":"120V","offer_id":41879711252565,"sku":"6219-173_69","price":359.1,"currency_code":"USD","in_stock":true},{"title":"240V","offer_id":41879711285333,"sku":"6219-174_69","price":359.1,"currency_code":"USD","in_stock":true},{"title":"277V","offer_id":41879711318101,"sku":"6219-175_69","price":359.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-6-bar-720w-full-spectrum-under-canopy-led-grow-light-120v-6219-173-69-6658452.jpg?v=1767477130"},{"product_id":"fluence-spydr-3-series-led-grow-light-systems","title":"Fluence SPYDR 3 Series LED Grow Light Systems","description":"\u003cp\u003eTen years after setting the standard in cannabis lighting, Fluence redefines it once again with SPYDR 3—the next-generation, multi-tier fixture designed for commercial-scale success. Built for both vegetative and flowering stages, SPYDR 3 delivers precision light control, higher energy efficiency, and rugged durability in the harshest grow environments. With flexible wattage, advanced spectra, and an IP66-rated design, it’s the most adaptable and powerful SPYDR yet—engineered to help growers simplify operations, maintain high quality and boost yields.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular and Scalable Design:\u003c\/strong\u003e Removable light bars, foldable frame, and plug-and-play connectors streamline installation and transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher Output, Greater Efficiency:\u003c\/strong\u003e Delivers up to 2,260 μmol\/s at up to 3.06 μmol\/J to maximize canopy penetration and reduce OPEX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNew Easy Dimming Setup:\u003c\/strong\u003e Separate input and output dimming ports for daisy-chaining multiple fixtures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Harsh Environments:\u003c\/strong\u003e Fully sealed, IP66-rated driver and lens resist humidity, chemicals, and cleaning agents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebate-Ready and ROI-Focused:\u003c\/strong\u003e Meets leading rebate program thresholds and lowers total cost of ownership for high-volume cultivators.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ci\u003e\u003cb\u003eLV (Low Voltage SPYDR 3 Series fixtures ship with autosensing 120-277V power supplies. HV (High Voltage) fixtures ship with autosensing 208-480V power supplies.\u003c\/b\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/spydr-3-comparison-chart.jpg?v=1768176097\" alt=\"SPYDR 3 Comparison Chart\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/hr3qLWombP4?si=UC5CS8wco6oFV0_7\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 3 delivers output up to 2,260 μmol\/s while maintaining exceptional efficiency at 3.0 μmol\/J. Up to multiple power configurations (390W, 500W, 620W, 700W, and 800W) give growers the flexibility to optimize their lighting strategy for any cultivation environment. With a Q90 rating at 50,000 hours and broad voltage compatibility from 208V to 480V, the SPYDR 3 ensures reliable, consistent performance across your entire operation. The versatile voltage range supports both standard and industrial electrical systems, making integration seamless across different facility types.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpectrum Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSPYDR 3 is available in Fluence’s PhysioSpec™ spectra — R4a, R5, and R45 — each optimized to meet the unique needs of commercial cannabis cultivators. Whether you’re focused on maximizing vegetative growth, enhancing flower quality, or achieving full-cycle performance, these scientifically engineered spectra deliver the precision and consistency modern grows demand. Built on more than a decade of photobiological research, PhysioSpec™ helps growers fine-tune morphology, control plant responses, and drive better results—rack after rack, season after season. \u003cstrong\u003eSpectrum options are fixed by model type.\u003c\/strong\u003e The reason for this is that more red causes more photobleaching at high PPFD levels. So lower output fixtures can have higher red and not risk photobleaching, while gaining efficiency. Higher PPF output fixtures cannot have as high of a red content so they do sacrifice some of efficiency, but that is to protect the crop from the issues of photobleaching at those high intensities.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Broad R4a (3h47)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spectrum_broad-r4a.jpg?v=1768176097\" alt=\"PhysioSpec Broad R4a\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Broad R5 (3x47)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spectrum_broad-r5.jpg?v=1768176097\" alt=\"PhysioSpec Broad R5\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Broad R45 (3i33, 3p47 and 3i47)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spectrum_broad-r45.jpg?v=1768176096\" alt=\"PhysioSpec Broad R45\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: Up to 2,200 µmol\/s\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec™ Broad R4a, R45, R5\u003c\/li\u003e\n\u003cli\u003eLight Output: PPF Up to 2,200 μmol\/s\u003c\/li\u003e\n\u003cli\u003eEfficacy: Up to 3.0 μmol\/J\u003c\/li\u003e\n\u003cli\u003eAC Input Power: From 390W to 800W\u003c\/li\u003e\n\u003cli\u003eMax. Ambient Temperature\/Humidity: 40°C, 90% RH non-condensing\u003c\/li\u003e\n\u003cli\u003eDimming: Source Signal Driver, 0-10 V, Dim to Off \/ Dimming: 10-100% (M12 Port)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): \u0026lt; 10% at 100% output\u003c\/li\u003e\n\u003cli\u003eLifetime (Driver and LED L90): \u0026gt; 50,000 hrs\u003c\/li\u003e\n\u003cli\u003eIP Rating: IEC 60529 IP66\u003c\/li\u003e\n\u003cli\u003eCertifications: UL 8800, UL 1598 Wet Location, CE\/CB, DLC UL 8800, UL 1598 Wet Location, CE\/CB, DLC\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 Year Limited Warranty\u003c\/li\u003e\n\u003cli\u003eDLC Reported Application Position\/Use case: Indoor (Stacked and Non-stacked), Top light\/Sole-source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for five years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Fluence SPYDR 3x 47\" LED Grow Light - LV (120-277V)","offer_id":42150648971349,"sku":"865207","price":712.6,"currency_code":"USD","in_stock":true},{"title":"Fluence SPYDR 3x 47\" LED Grow Light - HV (208-480V)","offer_id":42150649004117,"sku":"865208","price":740.55,"currency_code":"USD","in_stock":true},{"title":"Fluence SPYDR 3p 47\" LED Grow Light - LV (120-277V)","offer_id":42150648905813,"sku":"865205","price":841.85,"currency_code":"USD","in_stock":true},{"title":"Fluence SPYDR 3p 47\" LED Grow Light - HV (208-480V)","offer_id":42150648938581,"sku":"865206","price":869.79,"currency_code":"USD","in_stock":true},{"title":"Fluence SPYDR 3i 47\" LED Grow Light - LV (120-277V)","offer_id":42150648840277,"sku":"865203","price":890.75,"currency_code":"USD","in_stock":true},{"title":"Fluence SPYDR 3i 47\" LED Grow Light - HV (208-480V)","offer_id":42150648873045,"sku":"865204","price":985.07,"currency_code":"USD","in_stock":true},{"title":"Fluence SPYDR 3h 47\" LED Grow Light - LV (120-277V)","offer_id":42150648774741,"sku":"865201","price":911.71,"currency_code":"USD","in_stock":true},{"title":"Fluence SPYDR 3h 47\" LED Grow Light - HV (208-480V)","offer_id":42150648807509,"sku":"865202","price":1054.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-3-series-led-grow-light-systems-865201-2757153.jpg?v=1767477131"},{"product_id":"floraflex-under-canopy-adjustable-stand-675-1125","title":"FloraFlex Under Canopy Adjustable Stand - 6.75\"-11.25\"","description":"\u003cp\u003eFloraFlex Under Canopy Adjustable Stands allow for precise height adjustments from 6.75 inches up to 11.25 inches.\u003c\/p\u003e","brand":"FloraFlex","offers":[{"title":"Default Title","offer_id":41879713087573,"sku":"8680","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/floraflex-under-canopy-adjustable-stand-675-1125-8680-8310859.jpg?v=1767477128"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/collections\/led-grow-light-fixtures-8235351.png?v=1776391124","url":"https:\/\/www.bghydro.com\/collections\/led-grow-light-fixtures.oembed","provider":"BetterGrow Hydro","version":"1.0","type":"link"}