{"title":"Commercial Grow Lights","description":"","products":[{"product_id":"fluence-ray22-led-grow-light-bar","title":"Fluence RAY22 LED Grow Light Bar","description":"\u003cp\u003eRAY22 is available in six spectral options in a slim form factor just 22” long for tight grow environments. Like its longer cousins, RAY22 is well-suited for research, vertical farms, side-canopy and intracanopy use.\u003c\/p\u003e\n\u003cp\u003eThe Fluence RAY LED grow light bar is available in three sizes: 22″, 44″ and 66″, and it is available with six different spectral compositions for full-cycle growth and supplemental photomorphogenic response. The Fluence RAY comes with a 120-degree beam angle for close-proximity cultivation, which minimizes the amount of light on the floor, thus maximizes your growth rate and your ROI.\u003c\/p\u003e\n\u003cp\u003eThe LED grow light bars are UL-rated for damp locations and are 0-10V dimmable, so you can achieve the amount of PAR your plants need at each stage of their lifecycle. Each fixture comes with the power supply and everything you need to immediately use the lighting system over your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Greenhouse\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to PhysioSpec Indoor, \u003cstrong\u003ePhysioSpec Greenhouse\u003c\/strong\u003e is enriched with a higher amount of blue photons in the 400-500nm range, which are used to offset plant stretch induced by the sun’s far red radiation. As an added bonus, PhysioSpec Greenhouse offers a world-class work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnthoSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith dual-peak spectrum at 450nm and 660nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eAntho\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSpec is designed to provide rapid anthocyanin accumulation in plant tissue (i.e. purple lettuce coloration). Based on the latest academic research, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eAntho\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSpec is the most efficient spectrum for increasing anthocyanin production in plants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUVSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith a peak wavelength of 400nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eUVSpec\u003c\/span\u003e\u003cspan class=\"s1\"\u003e™ is designed to provide beneficial photomorphogenic responses by creating a mild stress response in plants. When applied incorrectly, research shows UV stress causes photoinhibition of chloroplasts, resulting in lower biomass production, photobleaching and death of leaves. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a peak spectrum at 660nm, PrSpec™ is designed to exclusively target phytochrome red photoreceptors. This spectrum is widely used to target Phytochrome Red (Pr) in photomorphogenic lighting applications, and it is used to delay flowering in short-day plants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePfrSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith a peak spectrum at 730nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003ePfrSpec\u003c\/span\u003e\u003cspan class=\"s1\"\u003e™ is designed to exclusively target phytochrome far red photoreceptors. This spectrum is widely used to target Phytochrome Far Red (Pfr) in photomorphogenic lighting applications, and it is used to lengthen the dark period to encourage the flowering process in Short Day Plants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: see below\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): see below\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): see below\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 1 lb\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor, PhysioSpec Greenhouse, AnthoSpec, PrSpec, PfrSpec or UVSpec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePPF depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 95 μ\u003cspan class=\"s1\"\u003emol\/s\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 95 μ\u003cspan class=\"s1\"\u003emol\/s\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 95 μ\u003cspan class=\"s1\"\u003emol\/s\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 63 μmol\/s\u003c\/li\u003e\n\u003cli\u003ePrSpec: 100 μmol\/s\u003c\/li\u003e\n\u003cli\u003eUVSpec: 54 μmol\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower consumption depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 45W\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 45W\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 44W\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 36W\u003c\/li\u003e\n\u003cli\u003ePrSpec: 38W\u003c\/li\u003e\n\u003cli\u003eUVSpec: 38W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElectrical efficiency depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 2.1 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 2.1 μmol\/J\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 2.2 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 1.8 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePrSpec: 2.6 μmol\/J\u003c\/li\u003e\n\u003cli\u003eUVSpec: 1.4 μmol\/J\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInput voltage is 100-277v. Amperage depends on fixture wattage and input voltage. Below are general estimates. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor (45W) — Amps @ 120V: .4 A | Amps @ 208V: .2A | Amps @ 240V: .2A | Amps @ 277V: .2A\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse (45W) — Amps @ 120V: .4 A | Amps @ 208V: .2A | Amps @ 240V: .2A | Amps @ 277V: .2A\u003c\/li\u003e\n\u003cli\u003eAnthoSpec (45W) — Amps @ 120V: .4 A | Amps @ 208V: .2A | Amps @ 240V: .2A | Amps @ 277V: .2A\u003c\/li\u003e\n\u003cli\u003ePrSpec (35W) — Amps @ 120V: .3A | Amps @ 208V: .2A | Amps@ 240V: .1A | Amps @ 277V: .1A\u003c\/li\u003e\n\u003cli\u003ePfrSpec (35W) — Amps @ 120V: .3A | Amps @ 208V: .2A | Amps@ 240V: .1A | Amps @ 277V: .1A\u003c\/li\u003e\n\u003cli\u003eUVSpec (45W) — Amps @ 120V: .4 A | Amps @ 208V: .2A | Amps @ 240V: .2A | Amps @ 277V: .2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll RAY LED's are guaranteed against manufacturing defects for three years with projected lifetime of 100,000 operating hours to 70 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879707942997,"sku":"9834","price":312.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-ray22-led-grow-light-bar-9834-3443562.png?v=1767477193"},{"product_id":"fluence-ray44-led-grow-light-bar","title":"Fluence RAY44 LED Grow Light Bar","description":"\u003cp\u003eAt 44″ long, our mid-length RAY44 offers six spectral choices and is perfect for side canopy lighting over a 4-foot area.\u003c\/p\u003e\n\u003cp\u003eThe Fluence RAY LED grow light bar is available in three sizes: 22″, 44″ and 66″, and it is available with six different spectral compositions for full-cycle growth and supplemental photomorphogenic response. The Fluence RAY comes with a 120-degree beam angle for close-proximity cultivation, which minimizes the amount of light on the floor, thus maximizes your growth rate and your ROI.\u003c\/p\u003e\n\u003cp\u003eThe LED grow light bars are UL-rated for damp locations and are 0-10V dimmable, so you can achieve the amount of PAR your plants need at each stage of their lifecycle. Each fixture comes with the power supply and everything you need to immediately use the lighting system over your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Greenhouse\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to PhysioSpec Indoor, \u003cstrong\u003ePhysioSpec Greenhouse\u003c\/strong\u003e is enriched with a higher amount of blue photons in the 400-500nm range, which are used to offset plant stretch induced by the sun’s far red radiation. As an added bonus, PhysioSpec Greenhouse offers a world-class work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnthoSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith dual-peak spectrum at 450nm and 660nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eAntho\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSpec is designed to provide rapid anthocyanin accumulation in plant tissue (i.e. purple lettuce coloration). Based on the latest academic research, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eAntho\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSpec is the most efficient spectrum for increasing anthocyanin production in plants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUVSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith a peak wavelength of 400nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003eUVSpec\u003c\/span\u003e\u003cspan class=\"s1\"\u003e™ is designed to provide beneficial photomorphogenic responses by creating a mild stress response in plants. When applied incorrectly, research shows UV stress causes photoinhibition of chloroplasts, resulting in lower biomass production, photobleaching and death of leaves. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a peak spectrum at 660nm, PrSpec™ is designed to exclusively target phytochrome red photoreceptors. This spectrum is widely used to target Phytochrome Red (Pr) in photomorphogenic lighting applications, and it is used to delay flowering in short-day plants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePfrSpec\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003eWith a peak spectrum at 730nm, \u003c\/span\u003e\u003cspan class=\"s2\"\u003ePfrSpec\u003c\/span\u003e\u003cspan class=\"s1\"\u003e™ is designed to exclusively target phytochrome far red photoreceptors. This spectrum is widely used to target Phytochrome Far Red (Pfr) in photomorphogenic lighting applications, and it is used to lengthen the dark period to encourage the flowering process in Short Day Plants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: see below\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): see below\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): see below\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 1 lb\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor, PhysioSpec Greenhouse, AnthoSpec, PrSpec, PfrSpec or UVSpec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePPF depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 190 μmol\/s\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 190 μmol\/s\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 190 μmol\/s\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 126 μmol\/s\u003c\/li\u003e\n\u003cli\u003ePrSpec: 200 μmol\/s\u003c\/li\u003e\n\u003cli\u003eUVSpec: 108 μmol\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower consumption depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 85W\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 85W\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 88W\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 72W\u003c\/li\u003e\n\u003cli\u003ePrSpec: 76W\u003c\/li\u003e\n\u003cli\u003eUVSpec: 76W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElectrical efficiency depends on chosen spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor: 2.2 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse: 2.2 μmol\/J\u003c\/li\u003e\n\u003cli\u003eAnthoSpec: 2.2 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePfrSpec: 1.8 μmol\/J\u003c\/li\u003e\n\u003cli\u003ePrSpec: 2.6 μmol\/J\u003c\/li\u003e\n\u003cli\u003eUVSpec: 1.4 μmol\/J\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInput voltage is 100-277v. Amperage depends on fixture wattage and input voltage. Below are general estimates. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysioSpec Indoor (85W) — Amps @ 120V: .7 A | Amps @ 208V: .4A | Amps @ 240V: .4A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003ePhysioSpec Greenhouse (85W) — Amps @ 120V: .7 A | Amps @ 208V: .4A | Amps @ 240V: .4A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003eAnthoSpec (85W) — Amps @ 120V: .7A | Amps @ 208V: .4A | Amps @ 240V: .4A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003ePrSpec (70W) — Amps @ 120V: .6A | Amps @ 208V: .3A | Amps @ 240V: .3A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003ePfrSpec (70W) — Amps @ 120V: .6A | Amps @ 208V: .3A | Amps @ 240V: .3A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003cli\u003eUVSpec (85W) — Amps @ 120V: .7A | Amps @ 208V: .4A | Amps @ 240V: .4A | Amps @ 277V: .3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll RAY LED's are guaranteed against manufacturing defects for three years with projected lifetime of 100,000 operating hours to 70 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879707975765,"sku":"9835","price":372.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-ray44-led-grow-light-bar-9835-1849442.png?v=1767477190"},{"product_id":"fluence-vypr-2p-led-grow-light-system","title":"Fluence VYPR 2p LED Grow Light System","description":"\u003cp\u003eWith energy efficiency reaching 2.7 µmol\/J and 1700 PPF, VYPR is a path to sustainability and productivity.\u003c\/p\u003e\n\u003cp\u003eVYPR 2p is a full-cycle top lighting solution for high bay growing environments. VYPR 2p is ideal for greenhouse supplemental lighting or indoor sole-source lighting. VYPR 2p builds on the previous generation’s VYPRx PLUS performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrow Into The Night. Grow Into The Winter. Grow Year-Round.\u003c\/strong\u003e Whether extending your day or extending your season, VYPR has the power, energy efficiency and longevity to grow sunup to sundown to sunup… year-round.\u003c\/p\u003e\n\u003cp\u003eVYPR is only 2.9” wide for shade free deployment. VYPR has a photosynthetic photon flux (PPF) up to 1700 µmol\/s. New power supply enclosure equipped with PushLock connectors for quick and easy installation.\u003c\/p\u003e\n\u003cp\u003eAll VYPR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height is ≥ 24” (61cm) above the canopy. BGH (and Fluence) both recommend a mounting height of approx. 3.5' above canopy, which will cover 16-18 sq ft and achieve approx. 950 PPFD. We do not recommend using the VYPR as a single light source, it's primarily designed to be used in large rooms where many VYPR's will be needed\/deployed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003eCompared to PhysioSpec Indoor, \u003cstrong\u003ePhysioSpec Greenhouse \u003c\/strong\u003eis enriched with a higher amount of blue photons in the 400-500nm range, which are used to offset plant stretch induced by the sun’s far red radiation. As an added bonus, PhysioSpec Greenhouse offers a world-class work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Pipe Bracket:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures below pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Square Bracket:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures from structural channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures from Unistrut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Options:\u003c\/strong\u003e The power supply is connected to the fixture using a DC Cord. A pair of Power Supply Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1700 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 631 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.7\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 9 lbs 4 oz (fixture), 12 lbs (power supply)\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™ or PhysioSpec Greenhouse™\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 100-277v. Amperage depends on fixture wattage (631W for VYPR 2p) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.2A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 3.03A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 2.63A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.28A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eStarting late 2019 all VYPR 2p's will now ship with the new PSU power supply (as opposed to the old PSE model). This new PSU is much smaller and lighter than the old PSE. See product images for specs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll VYPR 2 systems are guaranteed against manufacturing defects for five years with projected lifetime of 50,000 operating hours to 90 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708172373,"sku":"108200","price":1075.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-vypr-2p-led-grow-light-system-108200-7404736.png?v=1767477189"},{"product_id":"fluence-vypr-2x-led-grow-light-system","title":"Fluence VYPR 2x LED Grow Light System","description":"\u003cp\u003eVYPR 2x is comparable to VYPRx with a 20% increase in output and a shorter form factor, now just 24” long, VYPR 2x is an ideal greenhouse grow light or indoor high ceiling grow light for low DLI crops and operations looking to extend their photoperiod.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrow Into The Night. Grow Into The Winter. Grow Year-Round.\u003c\/strong\u003e Whether extending your day or extending your season, VYPR has the power, energy efficiency and longevity to grow sunup to sundown to sunup… year-round.\u003c\/p\u003e\n\u003cp\u003eVYPR is only 2.9” wide for shade free deployment. VYPR has a photosynthetic photon flux (PPF) up to 900 µmol\/s. New power supply enclosure equipped with PushLock connectors for quick and easy installation.\u003c\/p\u003e\n\u003cp\u003eAll VYPR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height is ≥ 24” (61cm) above the canopy. BGH (and Fluence) both recommend a mounting height of approx. 3.5' above canopy, which will cover 16-18 sq ft and achieve approx. 950 PPFD. We do not recommend using the VYPR as a single light source, it's primarily designed to be used in large rooms where many VYPR's will be needed\/deployed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments.  With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"{{media%20url='wysiwyg\/BGH\/productdesc\/SPDC_PhysioSpec.png'}}\" alt=\"PhysioSpec Indoor Spectrum\"\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to PhysioSpec Indoor, \u003cstrong\u003ePhysioSpec Greenhouse \u003c\/strong\u003eis enriched with a higher amount of blue photons in the 400-500nm range, which are used to offset plant stretch induced by the sun’s far red radiation. As an added bonus, PhysioSpec Greenhouse offers a world-class work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"{{media%20url='wysiwyg\/BGH\/productdesc\/SPDC_PhysioSpec-Greenhouse-966.png'}}\" alt=\"PhysioSpec Indoor Spectrum\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Pipe Bracket:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures below pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Square Bracket:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures from structural channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Ideal for hanging VYPR series fixtures from Unistrut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Options:\u003c\/strong\u003e The power supply is connected to the fixture using a DC Cord. A pair of Power Supply Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 900 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 342 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.6\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 4 lbs 15 oz (fixture), 9 lbs (power supply)\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™ or PhysioSpec Greenhouse™\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 100-277v. Amperage depends on fixture wattage (631W for VYPR 2p) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 2.85A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 1.64A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 1.43A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 1.23A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll VYPR 2 systems are guaranteed against manufacturing defects for five years with projected lifetime of 50,000 operating hours to 90 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708205141,"sku":"108480","price":740.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-vypr-2x-led-grow-light-system-108480-4440481.png?v=1767477191"},{"product_id":"fluence-spydrx-plus-led-grow-light-system","title":"Fluence SPYDRx PLUS LED Grow Light System","description":"\u003cp\u003eSPYDRx PLUS is a full-cycle top-lighting solution for commercial horticulture cultivation, with the power to scale from vegetative growth to bloom. For optimal results, we recommend SPYDRx PLUS deployed in environments with CO2 supplementation between 800-1400 ppm in reproductive growth stage due to high PPFD levels.\u003c\/p\u003e\n\u003cp\u003eSolid-state engineering coupled with a patent-pending form factor makes the SPYDRx family ideal for multi-tier vertical farming applications and single-tier applications including growth chambers, tables with adjacent aisles, and tents.\u003c\/p\u003e\n\u003cp\u003eWith a thickness of only 4.6” thin, and recommended mounting height just 6” from the top of the canopy, the SPYDR family is purposefully designed for vertical farming – from veg to bloom – with an average PPFD up to 1,030 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with their optional light intensity dimmer for precise control over PPFD, and offer the flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height 6” from top of canopy for optimal light uniformity, penetration and flux density above a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-Bracket:\u003c\/strong\u003e This bracket can be attached to the top of the SPYDRx unit and then screwed into whatever you are attaching the console\/fixture to. This option is preferred by growers using multi-tier growing systems, since it takes up the least amount of vertical space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAircraft Cable:\u003c\/strong\u003e Also referred to as a \"Gripple\" this \"Y\" hanger is what most growers choose because it's a bit more adaptable to different uses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Cable Kit:\u003c\/strong\u003e This add-on is a \"yo-yo\" style hanger, and is basically an adjustable version of the Aircraft Cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1535 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 660 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.3\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 32\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 100-277V. Amperage depends on fixture wattage (660W for SPYDRx PLUS) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cp\u003eAmperage depends on fixture wattage (660W for SPYDRx PLUS) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.5A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 3.2A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 2.8A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.4A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years with projected lifetime of 100,000 operating hours to 70 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708270677,"sku":"980900","price":1350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydrx-plus-led-grow-light-system-980900-7316171.png?v=1767477192"},{"product_id":"fluence-spydr-2p-47-led-grow-light-system","title":"Fluence SPYDR 2p 47\" LED Grow Light System","description":"\u003ch3\u003eIntroducing the second generation SPYDR Series.\u003cbr\u003eIteratively designed with you in mind.\u003c\/h3\u003e\n\u003cp\u003eSPYDR 2p is a full-cycle top lighting solution for commercial cultivation, with the power to scale from vegetative growth to higher light intensities in bloom. For optimal results, we recommend SPYDR 2p deployed in environments with C02 supplementation between 800-1400 ppm in reproductive growth stage due to high PPFD levels. SPYDR 2p builds on the previous generation’s SPYDRx PLUS performance.\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 2p has been designed with commercial growers in mind. With the upgraded form factor, the SPYDR 2 Series unfolds out of the box for a faster installation and a plug and play solution. SPYDR Series is ideal for both multi and single-tier applications including vertical farms, growth cambers, tables with adjustable aisles, and tents.\u003c\/p\u003e\n\u003cp\u003eWith a remotely mountable power supply, the SPYDR 2 Series is just 1.3” thin with a recommended mounting height of 6” above canopy. The SPYDR Series is purposefully designed for multi-tier cultivation – from veg to bloom – with PPFD up to 1,060 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1580 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 632 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.5\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 24lbs 13oz\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard SPYDR 2 Series fixtures ship with autosensing 100-277V power supplies.\u003c\/strong\u003e\u003c\/em\u003e To order 347V, 400V or 480V SPYDR 2 models, please contact us for pricing and lead times. Amperage depends on fixture wattage (632W for SPYDR 2p) and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage. Please note that 347V, 400V \u0026amp; 480V SPYDR 2 Series fixtures operate at an average of 3% higher wattage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.27A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 3.04A\u003c\/li\u003e\n\u003cli\u003eAmps @240V: 2.63A\u003c\/li\u003e\n\u003cli\u003eAmps @277V: 2.28A\u003c\/li\u003e\n\u003cli\u003eAmps @347V: 1.88A\u003c\/li\u003e\n\u003cli\u003eAmps @400V: 1.63A\u003c\/li\u003e\n\u003cli\u003eAmps @480V: 1.36A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eStarting late 2019 all SPYDR 2p's will now ship with the new PSU power supply (as opposed to the old PSE model). See product images for specs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE:\u003c\/b\u003e The SPYDR 2p's conformal coating is subject to degradation when it comes into contact with sulfur. Therefore, burning sulfur around these fixtures will void the warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr-comparison-1.png?v=1767933728\" alt=\"SPYDR Comparison Chart\" style=\"float: none;\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Low Voltage (120-277V)","offer_id":42152711127125,"sku":"104560","price":420.0,"currency_code":"USD","in_stock":false},{"title":"High Voltage (208-480V)","offer_id":42152711159893,"sku":"104561","price":420.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2p-47-led-grow-light-system-104560-3647266.png?v=1767477135"},{"product_id":"fluence-spydrx-led-grow-light-system","title":"Fluence SPYDRx LED Grow Light System","description":"\u003cp\u003eDesigned as an vegetative-stage, top-lighting solution for commercial applications, and as a full-cycle top-lighting solution for residential applications without CO2 supplementation.\u003c\/p\u003e\n\u003cp\u003eSolid-state engineering coupled with a patent-pending form factor makes the SPYDRx family ideal for multi-tier vertical farming applications and single-tier applications including growth chambers, tables with adjacent aisles, and tents.\u003c\/p\u003e\n\u003cp\u003eWith a thickness of only 4.6” thin, and recommended mounting height just 6” from the top of the canopy, the SPYDR family is purposefully designed for vertical farming – from veg to bloom – with an average PPFD up to 1,030 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with their optional light intensity dimmer for precise control over PPFD, and offer the flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height 6” from top of canopy for optimal light uniformity, penetration and flux density above a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-Bracket:\u003c\/strong\u003e This bracket can be attached to the top of the SPYDRx unit and then screwed into whatever you are attaching the console\/fixture to. This option is preferred by growers using multi-tier growing systems, since it takes up the least amount of vertical space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAircraft Cable:\u003c\/strong\u003e Also referred to as a \"Gripple\" this \"Y\" hanger is what most growers choose because it's a bit more adaptable to different uses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Cable Kit:\u003c\/strong\u003e This add-on is a \"yo-yo\" style hanger, and is basically an adjustable version of the Aircraft Cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 810 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 330 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.5\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 22\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 100-277V.\u003c\/p\u003e\n\u003cp\u003eAmperage depends on fixture wattage (330W for SPYDRx) and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 2.8A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 1.6A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 1.4A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 1.2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years with projected lifetime of 100,000 operating hours to 70 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708336213,"sku":"980800","price":875.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydrx-led-grow-light-system-980800-4461877.png?v=1767477136"},{"product_id":"fluence-spydr-2x-47-led-grow-light-system","title":"Fluence SPYDR 2x 47\" LED Grow Light System","description":"\u003ch3\u003eIntroducing the second generation SPYDR Series.\u003cbr\u003eIteratively designed with you in mind.\u003c\/h3\u003e\n\u003cp\u003eWith a remotely mountable power supply, the SPYDR 2 Series is just 1.3” thin with a recommended mounting height of 6”–12″ above canopy. The SPYDR Series is purposefully designed for multi-tier growing – from veg to bloom – with PPFD up to 1,060 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eSPYDR 2x is an early-development stage top-lighting solution for commercial horticulture growing, or a full-cycle top-lighting solution for home hobbyists growing without CO2 supplementation at ambient conditions around 400 ppm. SPYDR 2x is comparable to SPYDRx.\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 2 series has been designed with commercial growers in mind. With the upgraded form factor, the SPYDR 2 series unfolds out of the box for a faster installation and a plug and play solution. SPYDR Series is ideal for both multi and single-tier applications including vertical farms, growth cambers, tables with adjustable aisles, and tents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrow vertical\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a remotely mountable power supply, the SPYDR 2 Series is just 1.3” thin with a recommended mounting height of 6” above canopy. The SPYDR Series is purposefully designed for multi-tier growing – from veg to bloom – with PPFD up to 1,060 µmol\/m\u003csup\u003e2\u003c\/sup\u003e\/s over a 4’x4’ canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PhysioSpec Indoor Spectrum\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 860 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 345 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.6\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 24lbs 13oz\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard SPYDR 2 Series fixtures ship with autosensing 100-277V power supplies.\u003c\/strong\u003e\u003c\/em\u003e To order 347V, 400V or 480V SPYDR 2 models, please contact us for pricing and lead times. Amperage depends on fixture wattage (345W for SPYDR 2x) and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage. Please note that 347V, 400V \u0026amp; 480V SPYDR 2 Series fixtures operate at an average of 3% higher wattage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 2.71A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 1.56A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 1.35A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 1.17A\u003c\/li\u003e\n\u003cli\u003eAmps @ 347V: 0.96A\u003c\/li\u003e\n\u003cli\u003eAmps @ 400V: 0.84A\u003c\/li\u003e\n\u003cli\u003eAmps @ 480V: 0.7A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR systems are guaranteed against manufacturing defects for three years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr-comparison-1.png?v=1767933728\" alt=\"SPYDR Comparison Chart\" style=\"float: none;\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708368981,"sku":"107420","price":593.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2x-47-led-grow-light-system-107420-2900987.png?v=1767477134"},{"product_id":"fluence-spydr-2x-33-led-grow-light-system","title":"Fluence SPYDR 2x 33\" LED Grow Light System","description":"\u003ch3\u003eIntroducing the second generation SPYDR Series.\u003cbr\u003eIteratively designed with you in mind.\u003c\/h3\u003e\n\u003cp\u003eThe SPYDR 2x 33\" provides excellent coverage over a 4' x 3' canopy. Perfect for smaller areas or to fill in rows where another full-sized (47\") 2i would more be than what's needed (e.g. using two 2i 33\" fixtures plus one 47\" fixture to cover a perfect 10' long row).\u003c\/p\u003e\n\u003cp\u003eWith a remotely mountable power supply, the SPYDR 2 Series is just 1.3” thin with a recommended mounting height of 6”–12″ above canopy. The SPYDR Series is purposefully designed for multi-tier cultivation.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eSPYDR 2x is an early-development stage top-lighting solution for commercial horticulture cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO2 supplementation at ambient conditions around 400 ppm. SPYDR 2x is comparable to SPYDRx.\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 2 series has been designed with commercial growers in mind. With the upgraded form factor, the SPYDR 2 series unfolds out of the box for a faster installation and a plug and play solution. SPYDR Series is ideal for both multi and single-tier applications including vertical farms, growth cambers, tables with adjustable aisles, and tents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchuko:\u003c\/strong\u003e This plug type is commonly used in most European countries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 705 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 294 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.4\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eFixture Weight (lbs): 12.5 lbs\u003c\/li\u003e\n\u003cli\u003ePSE Weight (lbs): 8.2\u003c\/li\u003e\n\u003cli\u003eSpectrum: PhysioSpec Indoor™\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 3 ft @ 6-8 in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard SPYDR 2 Series fixtures ship with autosensing 100-277V power supplies.\u003c\/strong\u003e\u003c\/em\u003e To order 347V, 400V, 480V or European SPYDR 2 models, please contact us for pricing and lead times. Amperage depends on fixture wattage and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage. Please note that 347V, 400V \u0026amp; 480V SPYDR 2 Series fixtures operate at an average of 3% higher wattage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 2.48A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 1.41A\u003c\/li\u003e\n\u003cli\u003eAmps @ 240V: 1.27A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 1.06A\u003c\/li\u003e\n\u003cli\u003eAmps @ 347V: 0.84A\u003c\/li\u003e\n\u003cli\u003eAmps @ 400V: 0.72A\u003c\/li\u003e\n\u003cli\u003eAmps @ 480V: 0.60A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll SPYDR 2 systems are guaranteed against manufacturing defects for 5 years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879708401749,"sku":"131720","price":683.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2x-33-led-grow-light-system-131720-6282824.png?v=1767477134"},{"product_id":"gavita-ct1930e-led-120-277v","title":"Gavita CT1930e LED 120-277V","description":"\u003cp\u003eThe revolutionary new Gavita CT 1930e is the first and only LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS.\u003c\/p\u003e\n\u003cp\u003eCompatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size.\u003c\/p\u003e\n\u003cp\u003eThe CT 1930e delivers more crop-loving light in a broader spectrum at up to 20% energy savings than Gavita 1000 W DE and single ended HPS fixtures (based on average wattage of each fixture).\u003c\/p\u003e\n\u003cp\u003eCompatible with Gavita EL Master Controllers (sold separately) and most building automation systems. Patent-pending controller technology embedded within each fixture enables control of up to 2,000 fixtures per EL Master control channel and helps maintain unwavering output from light to light. If connecting to the Gavita EL1 or 2 controller purchase of HGC906717 or HGC906716 is required.\u003c\/p\u003e","brand":"Gavita","offers":[{"title":"Gavita 8 ft Power Cord 120 Volt for LED","offer_id":41879708467285,"sku":"13295-10643","price":1020.38,"currency_code":"USD","in_stock":true},{"title":"Gavita 8 ft Power Cord 208-240 Volt for LED","offer_id":41879708500053,"sku":"13295-10644","price":1020.38,"currency_code":"USD","in_stock":true},{"title":"Gavita 8 ft Power Cord 277 Volt for LED","offer_id":41879708532821,"sku":"13295-10645","price":1020.38,"currency_code":"USD","in_stock":true},{"title":"Gavita 8 ft Power Cord 277-400 Volt for Gavita LED","offer_id":41879708565589,"sku":"13295-13041","price":1020.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/gavita-ct1930e-led-120-277v-gavita-8-ft-power-cord-120-volt-for-led-13295-10643-7641982.jpg?v=1767477134"},{"product_id":"gavita-rs-1900e-led-208-480-volt","title":"Gavita RS 1900e LED 208-480 Volt","description":"\u003cdiv class=\"attach_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-gavita-HGC906410_Gavita_RS_1900e_LED_Spec_Sheet.pdf?v=1767658078\" title=\"Gavita RS 1900e LED\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg class=\"aligned-img\" alt=\"PDF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/icon-pdf-35.png\"\u003e \n\u003cstrong\u003e\u003cspan class=\"aligned-text\"\u003eGavita RS 1900e LED Specifications Sheet\n\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\n\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe RS 1900e is the latest offering from Gavita, and replaces the old 1700e. It has a PAR output of 1900 µmol s-1 and an efficiency of 3.0 µmol\/j. It delivers a broad white light with an enhanced blue spectrum, which some studies show may intensify secondary metabolites, such as terpenes and cannabinoids. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis powerful, full-spectrum light source is intended for both vegetative and flowering stages. Used in conjunction with the Gavita Master EL3 Controller (sold separately), this fixture can be dimmed down to 10%. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1900e utilizes a lightweight, 6-bar design similar to the Gavita Pro RS 2400e LED,\u003cspan style=\"font-weight: 400;\"\u003e and a Gavita broad range driver and custom made Gavita diodes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBroad white light with an enhanced blue spectrum, which some studies show may intensify secondary metabolites, such as terpenes and cannabinoids.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eDimmable down to 10% with the \u003c\/span\u003eGavita EL3 Master controller (sold separately)\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eA light weight, 6-bar design built off the platform of the Gavita Pro RS 2400e LED to deliver high output and efficiency\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePremium Gavita diodes and drivers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEmbedded adapter for maximum controllability with the Gavita EL3 Master controller (sold separately)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIP66 wet rating and ANSI\/CAN\/UL 8800 compliant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e5 year limited warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eGavita broad range driver to accommodate a larger voltage range of 208 - 480 V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eQuick Specifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eModel No. HGC906410\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eVolt: 208 - 480 V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFrequency: 50\/60 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eETL Listed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWatts: 650 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCurrent at 208 V: 3.1 A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCurrent at 480 V: 1.34 A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMax Ambient Temp: 40° C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDim: 44.8 in x 43.25 in x 3.3 in\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWeight: 27.5 lb\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BFG Supply","offers":[{"title":"208\/240 Volt - 8'","offer_id":41879709089877,"sku":"14540","price":698.14,"currency_code":"USD","in_stock":true},{"title":"277-400 Volt - 8'","offer_id":41879709057109,"sku":"14540-HV","price":698.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/gavita-rs-1900e-led-208-480-volt-277-400-volt-8-14540-8275443.jpg?v=1767477135"},{"product_id":"fluence-vypr-3p-led-grow-light-system","title":"Fluence VYPR 3p LED Grow Light System","description":"\u003cp class=\"title-w-sub\"\u003e\u003cb\u003eEFFICIENT AND POWERFUL FOR BOUNTIFUL HARVESTS ALL YEAR LONG\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt upon patented thermal management technologies, the latest VYPR top lights feature market-leading efficacies and high light output per fixture. Thus, helping reduce the fixture count and system cost per lit area to accelerate the adoption of LED horticulture lighting.\u003c\/p\u003e\n\u003cp\u003eWith more compact power supplies, beam widening reflectors and new mounting options, the latest VYPR empowers growers to achieve their growing targets all year round.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGROWER'S CHOICE OF SPECTRUM\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eFrom broad white to high red, Fluence PhysioSpec is offering BROAD and DUAL spectrum options on VYPR Series. This flexibility prioitizes the grower's needs in optoimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhysioSpec ™ BROAD Spectra\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe PhysioSpec™ BROAD Spectra offers photon emission across the PAR 400-700nm continuous wavelength range, balancing energy efficiency with quality of light for desired plant response and human work environment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhysioSpec ™ DUAL Spectra\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe PhysioSpec™ DUAL Spectra features two narrow spectral bands that maximize energy efficiency, aiming to further reduce energy cost and operational expense.\u003c\/p\u003e\n\u003cp\u003eAll VYPR models are dimmable for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height is ≥ 24” (61cm) above the canopy. BGH (and Fluence) both recommend a mounting height of approx. 3.5' above canopy, which will cover 16-18 sq ft and achieve approx. 950 PPFD. We do not recommend using the VYPR as a single light source, it's primarily designed to be used in large rooms where many VYPR's will be needed\/deployed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVYPR Wire Hangers:\u003c\/strong\u003e These standard mounting options include Pipe, Unistrut and Square wire hangers. Ideal for mounting under the truss or pairing with chain or cable to suspend the fixture lower.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCombo Mount:\u003c\/b\u003e Stacking the light fixture and power supply under the truss allows individual VYPRs to be close to one another without a second support structure for hanging the power supplies \u003ci\u003e\u003cb\u003e(for AC input voltage 277-480V only)\u003c\/b\u003e\u003c\/i\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePSU2 Surface Mount:\u003c\/b\u003e Mounting the power supply above the truss increases VYPR's distance to crops for better light uniformity, and allows VYPRs to be close to one another without a second support structure for hanging the power supplies \u003ci\u003e\u003cb\u003e(for AC Input Voltage 277-480 V only)\u003c\/b\u003e\u003c\/i\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVYPR Parallel to Truss Mount:\u003c\/b\u003e This mounting option maximizes light fixture's distance to crops for better light uniformity, and clears the space under the truss for operating other equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVYPR Perpendicular to Truss Mount:\u003c\/b\u003e This mounting option allows the fixture to hang perpendicular to the truss to be in parallel to high-wire crop rows, providing better light uniformity without installing additional support structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Options:\u003c\/strong\u003e The power supply is connected to the fixture using a DC Cord. A pair of Power Supply Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: up to 2330 µmol\/s (depending on chosen spectrum)\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 620 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.7-3.8 (depending on chosen spectrum)\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 7.8 lbs (fixture), 7.1 lbs (power supply)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput voltage is 120-277v (347-480v model also available). Amperage depends on fixture wattage and input voltage. Below is a general estimate. Actual figures may vary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.3A\u003c\/li\u003e\n\u003cli\u003eAmps @ 208V: 3.0A\u003c\/li\u003e\n\u003cli\u003eAmps @ 230V: 2.7A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.23A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll VYPR 3 systems are guaranteed against manufacturing defects for five years with projected lifetime of 50,000 operating hours to 90 percent of initial flux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879709253717,"sku":"722001","price":632.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-vypr-3p-led-grow-light-system-722001-4580803.png?v=1767477131"},{"product_id":"fluence-spydr-2h-47-led-grow-light-system","title":"Fluence SPYDR 2h 47\" LED Grow Light System","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIncrease in PPF Increase efficiency by 28% and maximizes space with greater light intensity.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSPYDR 2h\u003c\/strong\u003e is a high-output grow light for commercial cultivation environments, producing a photosynthetic photon flux (PPF) of 2,180 µmol\/s. With strong uniformity and our PhysioSpec broad R4 spectrum, SPYDR 2h is designed to maximize yields for growers by incorporating high-intensity lighting and cultivation strategies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetachable Power Supply\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SPYDR 2 Series features a detachable Power Supply that can be mounted remotely on the side of a rack or on an adjacent wall to remove heat from your grow space. With the power supply remote mounted, the remaining SPYDR 2 fixture is only 1.3” (33 mm) thin (4.6” (117 mm) with power supply attached).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePush-lock Connectors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor quick and easy installation, all SPYDR 2 Series fixtures and associated cables have been updated with Push-Lock connectors. Power and dimming cables now snap together with a light push while still retaining their IP66 wet-location rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Mounting Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith the ability to maximize use of your growing space, SPYDR 2 has various hardware options for easy mounting to all types of racks and tables with no drilling or other modifications to the rack system.\u003c\/p\u003e\n\u003cp\u003eRecommended mounting height of 6”–12″ (152 x 305 mm) above plant canopy.\u003c\/p\u003e\n\u003cp\u003eAll SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysioSpec Indoor \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlug Type Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 5-15P: \u003c\/strong\u003eThis is the standard plug type for most residential (110\/120V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA 6-15P:\u003c\/strong\u003e This is the standard plug type for most commercial (220\/240V) outlets in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA L7-15P:\u003c\/strong\u003e This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails:\u003c\/strong\u003e If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @230V: 3.63A\u003c\/li\u003e\n\u003cli\u003eAmps @277V: 2.87A\u003c\/li\u003e\n\u003cli\u003eAmps @347V: 2.34A\u003c\/li\u003e\n\u003cli\u003eAmps @480V: 1.70A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"SPYDR 2r specs\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr2h_specs.jpg?v=1767934648\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879709384789,"sku":"141290","price":894.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2h-47-led-grow-light-system-141290-1705345.jpg?v=1767477134"},{"product_id":"fluence-spydr-2r-led-grow-light-system","title":"Fluence SPYDR 2r LED Grow Light System","description":"\u003cp\u003eThe Fluence SPYDR 2r LED Grow Light is an advanced lighting solution designed specifically for craft herb cultivators. It offers a powerful 1600 µmol\/s PPF output, ideal for micro-growers aiming to optimize their harvest. Equipped with the PhysioSpec™ Broad R4 spectrum, the SPYDR 2r ensures balanced, full-cycle cultivation, while the included 0-100% dimmer provides precise control over light intensity throughout the growth stages. This high performance grow light is tailored for those seeking to command their indoor growing environment with efficiency and ease.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBroad R4 (PhysioSpec Indoor) \u003c\/strong\u003eis a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones\/cuttings, mothers, vegetative and flowering applications) in indoor environments. With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLance Hangers:\u003c\/strong\u003e This is the standard mounting option, and is included free with your purchase of a SPYDR 2r. Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Hanging Kit:\u003c\/strong\u003e Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2\"-3.5\" support beams (rolling racks and some pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong \"V\" Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4\"-5\" support beams (pallet racks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Decking Mounting Brackets:\u003c\/strong\u003e Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDC Cord Upgrade Options:\u003c\/strong\u003e The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3\" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCord Options:\u003c\/strong\u003e The SPYDR 2r ships with a 6' long 120V (NEMA 5) power cord. Additional cords are available for purchase separately, including 15' long cords and cords with other plug types. SPYDR 2r fixtures are compatible with all Fluence SPYDR 2 power cords (e.g. 2x, 2p, 2i and 2h power cords).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPF: 1600 µmol\/s\u003c\/li\u003e\n\u003cli\u003ePower consumption (watts): 626 typical\u003c\/li\u003e\n\u003cli\u003eElectrical efficiency (μmol\/J): 2.5\u003c\/li\u003e\n\u003cli\u003eAmperage: see below\u003c\/li\u003e\n\u003cli\u003eWeight (lbs): 24.8 lbs\u003c\/li\u003e\n\u003cli\u003eSpectrum: Broad R4\u003c\/li\u003e\n\u003cli\u003eCoverage Area: 4 ft x 4 ft @ 6-8\" in above canopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SPYDR 2r fixture ships with an autosensing 100-277V power supply.\u003c\/strong\u003e\u003c\/em\u003e Amperage depends on fixture wattage and input voltage. Below is a general estimate. Actual figures should be calculated based on your exact voltage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmps @ 120V: 5.32A\u003c\/li\u003e\n\u003cli\u003eAmps @ 230\/240V: 2.79A\u003c\/li\u003e\n\u003cli\u003eAmps @ 277V: 2.34A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSPYDR 2r systems are guaranteed against manufacturing defects for five years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluence lighting products are non-returnable. From Fluence - \"Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years.\"\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/prod-fluence-spydr-comparison-1.png?v=1767933728\" alt=\"SPYDR Comparison Chart\" style=\"float: none;\"\u003e\u003c\/div\u003e","brand":"Fluence Bioengineering","offers":[{"title":"Default Title","offer_id":41879709646933,"sku":"619700","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/fluence-spydr-2r-led-grow-light-system-619700-2803582.jpg?v=1767477128"},{"product_id":"sun-system-lec-commercial-fixture-208-240-volt-w-3100-k-lamp","title":"Sun System LEC Commercial Fixture 208-240 Volt w\/ 3100 K Lamp","description":"\u003cp\u003e\u003cspan\u003eSun System Commercial Fixtures are perfect for use when mixing Double Ended lighting with CMH lighting. Mixing these two types of light sources can yield spectacular results by combining the amazing spectrum and UV production of the CMH lamp with the intensity and spectrum of the HPS lamp. The problem with using standard CMH fixtures when alternating with DE fixtures is that because the DE fixtures typically need to be positioned higher above the canopy than CHM fixtures, the CMH fixture tends to block some of the light produced by the DE. The Commercial CMH Fixtures solve this problem because their compact reflector design allows them to be hung higher above the canopy while still maximizing the light output intensity and footprint. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSun System® LEC® 315 Commercial utilizes cutting edge Light Emitting Ceramic® technology. State-of-the-art 95% reflective German aluminum interior offers unparalleled output, reflectivity and diffusion. Includes Philips highly efficient agriculturally engineered CDM-T Elite 315 Agro Lamp. This lamp creates amazing full color light spectrum out of next generation ceramic lamps. Higher amounts of beneficial UV and far red spectrums increase the lamp’s growth power to the plants. Very high 1.95 PPF per second light source (3100° K lamp). 3100° K or 4200° K color temperature, high 92 CRI, 33,000 initial lumens (105Lm\/W). Long life 20,000 hour lamp. High 90% lumen maintenance @ 8000 hr. High 85% PPF maintenance @ 20,000 hr. Unique open rated lamp construction reduces radiant heat from the arc tube and is suitable for open fixture use. The LEC® 315 Commercial has a Philips 50\/60 Hz low frequency, square wave, highly efficient electronic ballast rated for 50,000 hour ballast life. The compact commercial design to minimize greenhouse sunlight blockage. Power cord\/plug configuration varies by fixture voltage. Detachable unistrut mounting hangers or traditional V-hangers. US Patent Pending: 29\/518,803.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e3100K lamp is best for flowering; the 4200K lamp is best for vegetative growth.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"BFG Supply","offers":[{"title":"Default Title","offer_id":41887742034005,"sku":"8719","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/files\/sun-system-lec-commercial-fixture-208-240-volt-w-3100-k-lamp-8719-2682464.jpg?v=1767477072"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/3426\/6709\/collections\/commercial-grow-lights-5168575.png?v=1776390845","url":"https:\/\/www.bghydro.com\/collections\/commercial-grow-lights.oembed","provider":"BetterGrow Hydro","version":"1.0","type":"link"}