Our site just got a new paint job. There are still a few kinks to work out, please bear with us as we work through them. Thanks for your continued support!
Octa-Bubbler 10 GPH

Octa-Bubbler 10 GPH

AutoPot 1/4

AutoPot 1/4" In-line Valve

Octa-Bubbler 20 GPH Flow Control Device - Green

was $0.69 Special Price $0.07
You save $0.62 (89.86%) off MSRP

The Octa-Bubbler flow control device allows you to change the gallons per hour on your Octa-Bubbler without replacing it. The flow control devices are color coded. Choose the red flow control device for 10 GPH and the green for 20 GPH. NOTE: you will need 8 of these (one for each outlet) to convert your existing Octa-Bubbler to a 20 GPH Octa-Bubbler.

The Octa-Bubbler is an eight-outlet, pressure compensating, low-flow irrigation device. Along with 8 flow-controlled swivel barbed outlets (acommodates 3/16" ID - 1/4" OD drip tubing), it has a 1/2” FPT inlet thread base for installation on standard risers, and a backflow prevention device for added protection.

The Octa-Bubbler® is ideal for converting sprinkler systems to low flow, because it is designed to apply the amount of water the plants need during the time the sprinkler zone operates.

SKU
8730
Availability: In stock online - contact us for store pickup

The Octa-Bubbler flow control device allows you to change the gallons per hour on your Octa-Bubbler without replacing it. The flow control devices are color coded. Choose the red flow control device for 10 GPH and the green for 20 GPH. NOTE: you will need 8 of these (one for each outlet) to convert your existing Octa-Bubbler to a 20 GPH Octa-Bubbler.

The Octa-Bubbler is an eight-outlet, pressure compensating, low-flow irrigation device. Along with 8 flow-controlled swivel barbed outlets (acommodates 3/16" ID - 1/4" OD drip tubing), it has a 1/2” FPT inlet thread base for installation on standard risers, and a backflow prevention device for added protection.

The Octa-Bubbler® is ideal for converting sprinkler systems to low flow, because it is designed to apply the amount of water the plants need during the time the sprinkler zone operates.

Primary Application: Designed for tree, shrub, flower and ground cover planting beds. This bubbler can be placed on spray head zones. Water is applied in the right quantity where needed with no waste.

The Pressure Compensating Diaphragm will deliver relatively uniform distribution of water across a wide pressure range of 20 PSI to 60 PSI.

More Information
SKU 8730
Manufacturer's Suggested Retail Price $0.69
Dimensional/Billable Weight (lbs) 0.05
Actual Product Weight 0.05
Length (in.) .25
Width (in.) .25
Height (in.) .25
Brand Pepco
Vendor Item # HGC708192
Manufacturer Warranty Yes
Write Your Own Review
You're reviewing:Octa-Bubbler 20 GPH Flow Control Device - Green
Your Rating