SINCE 2000

Double Ended (DE) Components

4 Item(s)

per page

  • Galaxy Sun System 1 DE 1000 Watt 120/240 Volt Ballast

    The Sun System® 1 advanced 105 kHz microprocessor is designed specifically to drive DE lamps at a sustained peak performance. The new Sun System® 1 DE series provides premium components and superior construction for the professional horticultural enthusiast. Thermally optimized non-air cooled aluminum housing. Does not require a cooling fan. Internal ballast programming will protect unit in instance of open circuit, short circuit, over/under voltage or high temperature exposure. Features internal built-in circuit breaker. This Sun System® 1 ballast features dimmable/selectable wattage, turbo and built-in green LED lights for easily identified self-diagnostic performance codes. Low current, staggered ignition delay feature eliminates circuit inrush overload and protects lamp for increased lumen maintenance. Dual universal lamp cord receptacle is compatible with all Sun System® brand reflectors as well as other branded reflectors. Includes a 6 foot 120 volt power cord. Purchase a 240 volt power cord separately (#903088). Compliant with both FCC Article 18 Part A (governs commercial use) and FCC Article 18 Part B (governs residential use) as tested by an independent US testing lab in a true as used configuration.

    Learn More
  • AC/DE Air-Cooled Double Ended Reflector 8"

    Don't buy an air-cooled double-ended reflector until you read this!

    The AC/DE is the best air-cooled DE reflector available - period. Other air-cooled DE reflectors allow the air to pass over the lamp or through the lamp compartment. While this does remove more heat, it also has a negative impact on the quality and spectrum of light produced by the lamp. This is due to the fact that DE lamps use quartz instead of borosilicate glass, which offers less insulation to the inner arc tube. DE lamps are designed to operate at a very high temperature. While other air-cooled reflectors cool the lamp and take away from the light, the AC/DE positions the lamp deep into the top of the hood, keeping the lamp at the temperature the lamp was designed to run at.

    Learn More
  • Gavita Master Controller EL1

    Our e-series ballasts no longer require a switchboard to be switched on and off and no longer need their own switch to dim or boost them. Now you can just touch a few buttons on your controller to be in complete control of all your connected ballasts at once. Our Master controllers do this, and much more! The Gavita EL controller series currently comprises of two models: The EL1 and EL2. Both feature auto-dim, auto-shutdown, sunrise/sunset and timer. The EL1 has one output channel, while the EL2 has 2 output channels and additional outputs for External Contactor Modules and alarm contacts. For one room without auxiliary equipment or alarm contacts, the EL1 is the best choice for you. If you require switched auxiliary equipment during lights on/off, alarm contacts and/or a 2 room 12/12 setup, the EL2 is most suitable. Learn More
  • Gavita Master Controller EL2

    Our e-series ballasts no longer require a switchboard to be switched on and off and no longer need their own switch to dim or boost them. Now you can just touch a few buttons on your controller to be in complete control of all your connected ballasts at once. Our Master controllers do this, and much more! The Gavita EL controller series currently comprises of two models: The EL1 and EL2. Both feature auto-dim, auto-shutdown, sunrise/sunset and timer. The EL1 has one output channel, while the EL2 has 2 output channels and additional outputs for External Contactor Modules and alarm contacts. For one room without auxiliary equipment or alarm contacts, the EL1 is the best choice for you. If you require switched auxiliary equipment during lights on/off, alarm contacts and/or a 2 room 12/12 setup, the EL2 is most suitable. Learn More

4 Item(s)

per page