SINCE 2000

Double Ended (DE) Components

Items 1 to 20 of 27 total

per page

Page:
  1. 1
  2. 2
  • Nanolux Cloud Control NCCS Data Transfer Unit (DTU) - OLD/WINDOWS MODEL

    NOTICE: This is the older WINDOWS version of the Nanolux DTU and is no longer available. It has been replaced with the new and improved APP model. The APP model no longer requires the use of a computer to access the software and program the lighting settings. Instead, everything is accomplished using an APP designed for both iPhones and Android devices. In addition, there are now three different models of RTU's (the USB device that plugs into each individual Nanolux NCCS ballast). It is very important to use the correct RTU with each of your ballasts, otherwise they will not perform as expected. Please refer to the descriptions for the individual components for complete details, or contact us and we will be happy to assist you.

    The Nanolux Cloud Control System was designed and engineered to provide a complete solution for the control of the lighting and environmental controls of a grow room. The NCCS system allows for precision control of all devices in a grow room through its simple and intuitive computer software program.

    At the heart of the NCCS is a free software program which allows you to specify all of the parameters of your lighting and environmental control settings in your room. The program is then downloaded from your computer to the DTU (data transfer unit). The DTU is the brain of the system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wire/essly with individual RTU (remote terminal unit) USB devices. The NCCS system currently allows for precision control of your lighting system with dimming, multiple lighting areas, high-temperature dimming features along with fan control. The NCCS will be adding C02 functions, humidity and temperature control, pH and nutrient control, pump control and remote camera features in the near future.

    The DTU is the brain of the NCCS system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wirelessly with individual RTU (remote terminal unit) USB devices.

    Learn More
  • Nanolux Cloud Control NCCS Remote Terminal Unit (RTU) - APP MODEL

    NOTE: This is the newer APP version of the Nanolux RTU. It is compatible only with the new APP DTU model and Nanolux APP ballasts. It is not compatible with the old CLOUD/WINDOWS DTU model (the model with only one antenna) and CLOUD/WINDOWS ballasts. If you need help putting together a Nanolux system with new and/or old equipment please contact us and we will be happy to assist you.

    Absolutely the coolest way to control your Nanolux lighting systems - from 1 to 999 ballasts or fixtures - and completely wireless! Nanolux DE fixtures have quickly replaced our Gavita sales because the fixtures offer virtually the same performance, with a lower failure rate and a lower price. They also manufacture some of our most popular DE and SE ballasts. The other great thing about Nanolux is their Cloud Control System, which blows the doors off the Gavita EL1 and EL2 controllers and any other lighting controller on the market today.

    With traditional grow lighting, you need to purchase controllers for every 4, 8 or 12 lights you have. These controllers are usually hard-wired by an electrician and plugged into a timer to control the light cycle. Not only does the NCCS do WAY MORE than a typical controller, it requires no hard wiring and is less expensive than a single 4-light controller, and controls up to 999 lights!

    The RTU is the data transfer communication device that is installed on the Nanolux Ballasts which allows them to communicate with the DTU. They receive information from the DTU communicating when to dim and turn on and off. They also send data back to the DTU on the status of the ballast.

    Learn More
  • Nanolux Cloud Control NCCS Remote Terminal Unit (RTU) - C1 MODEL

    NOTE: This is the new C1 version of the Nanolux RTU. It is compatible only with the new APP DTU and CLOUD/WINDOWS Nanolux ballasts. It is not compatible with the old CLOUD/WINDOWS DTU model (the model with only one antenna) odr APP ballasts. If you have a new APP DTU but your ballast is the old CLOUD/WINDOWS model, then this is the RTU you need to use. If you need help putting together a Nanolux system with new and/or old equipment please contact us and we will be happy to assist you.

    Absolutely the coolest way to control your Nanolux lighting systems - from 1 to 999 ballasts or fixtures - and completely wireless! Nanolux DE fixtures have quickly replaced our Gavita sales because the fixtures offer virtually the same performance, with a lower failure rate and a lower price. They also manufacture some of our most popular DE and SE ballasts. The other great thing about Nanolux is their Cloud Control System, which blows the doors off the Gavita EL1 and EL2 controllers and any other lighting controller on the market today.

    With traditional grow lighting, you need to purchase controllers for every 4, 8 or 12 lights you have. These controllers are usually hard-wired by an electrician and plugged into a timer to control the light cycle. Not only does the NCCS do WAY MORE than a typical controller, it requires no hard wiring and is less expensive than a single 4-light controller, and controls up to 999 lights!

    The RTU is the data transfer communication device that is installed on the Nanolux Ballasts which allows them to communicate with the DTU. They receive information from the DTU communicating when to dim and turn on and off. They also send data back to the DTU on the status of the ballast.

    Learn More
  • Nanolux Cloud Control NCCS Remote Terminal Unit (RTU) - OLD/WINDOWS MODEL

    NOTE: This is the older WINDOWS version of the Nanolux RTU. It is compatible only with the old CLOUD/WINDOWS DTU model (the model with only one antenna) and CLOUD/WINDOWS Nanolux ballasts. It is not compatible with the new APP RTU or APP ballasts. If you need help putting together a Nanolux system with new and/or old equipment please contact us and we will be happy to assist you.

    The Nanolux Cloud Control System was designed and engineered to provide a complete solution for the control of the lighting and environmental controls of a grow room. The NCCS system allows for precision control of all devices in a grow room through its simple and intuitive computer software program.

    At the heart of the NCCS is a free software program which allows you to specify all of the parameters of your lighting and environmental control settings in your room. The program is then downloaded from your computer to the DTU (data transfer unit). The DTU is the brain of the system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wire/essly with individual RTU (remote terminal unit) USB devices. The NCCS system currently allows for precision control of your lighting system with dimming, multiple lighting areas, high-temperature dimming features along with fan control. The NCCS will be adding C02 functions, humidity and temperature control, pH and nutrient control, pump control and remote camera features in the near future.

    The RTU is the data transfer communication device that is installed on the Nanolux Ballasts which allows them to communicate with the DTU. They receive information from the DTU communicating when to dim and turn on and off. They also send data back to the DTU on the status of the ballast.

    Learn More
  • Super Spreader for Adjust-A-Wings Large Double Ended

    Creates wider, more even light spread. Eliminates “hot spots” and “shady edges”. Allows closer light placement for increased power. Reduces heat at plant level by at least 9ºF. Increase your yields using less lights! Grow right through summer... No problem! New lightweight 95% reflective super alloy. Prismatic surface spreads light more evenly. Compatible with Large Adjust-A-Wings Double Ended Reflectors.

    Learn More
  • Blazer DE Reflector

    The shape of the Blazer� DE Reflector is perfect for square growing areas. Highly reflective aluminum offers excellent output, reflectivity and diffusion. Made specifically for double-ended horticulture lamps (not included). German made, UL listed double-ended sockets. Unique double-ended construction allows for maximum optical efficiency and uniformity. Improved spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/Lumen maintenance (up to 90% PAR at 10,000 hours of operation). Deep reflector design holds the lamp heat to keep the DE lamp at optimal operating temperature. Galvanized steel housing with durable powder-coated finish. Includes pre-wired sockets and 15 ft lamp cord. Learn More
  • AC/DE 8 in Replacement Glass Frame

    All reflector replacement glass frames are made to the same exacting standards as your original reflector glass frame. White powder coated frame with the glass sealed in with neoprene. Match the glass frame that goes with your reflector. Includes frame and tempered glass. Learn More
  • Flex DE Reflector

    The Flex DE Reflector is larger than most standard wing reflectors. Highly reflective aluminum offers excellent uniformity, output and diffusion. Patent pending enclosed end wing design for better control of the light footprint. Made specifically for double-ended horticultural lamps (not included). Features German made, UL listed double-ended sockets. Unique double-ended construction allows for maximum optical efficiency and uniformity. Improved spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/Lumen maintenance (up to 90% PAR at 10,000 hours of operation). Light weight and easy to hang. Comes completely assembled with prewired 15 ft lamp cord and sockets. Learn More
  • Gavita HortiStar 600 SE Reflector

    HortiStar 600 SE has a replaceable Miro aluminum reflector with 96% efficiency.

    This fixture is suitable for HPS and MH lamps 600 watt to 750 watts.

    The lamp cord terminal is shielded by a metal housing.

    Installation is very easy with two eye bolts.

    Comes with 13' lamp cord.

    Reflector dimensions: 20.1" long x 9.6" wide x 7.6" high.

    Learn More
  • Gavita HortiStar HR 96 600 SE Reflector Replacement

    The reflector is one of the key elements of a successful fixture. You can have the best ballast and the best lamp, but without a good reflector you waste a lot of light, every day you use it. Keeping your reflectors in optimal condition is a must for good results. These are replacement reflector inserts for the Gavita HortiStar reflector (#906015). Reflector replacement only; does not include fixture, etc.

    Learn More
  • Gavita Pro Wide 150° DE Reflector

    Replacement reflector for Gavita Pro line and HortiStar. Easy to install, no tools required. Wide spread for optimal uniformity (150° beam angle). Suitable for double-ended 750-1000W HPS. This reflector is most suitable for overlapping plans. Designed for uniformity. Made from MIRO® aluminum.

    Learn More
  • Gavita HortiStar 1000 DE Reflector Double Ended

    • HortiStar 1000 Double Ended has a replaceable Miro aluminum reflector with 96% efficiency.
    • Specifically designed for high frequency electronic ballasts it has a connection at each side of the lamp, removing the need for a frame wire inside the lamp. For double ended 1000 watt lamps.
    • The lamp cord terminal is shielded by a metal housing. Comes with 13' lamp cord.
    • Installation is very easy with two eye bolts.
    • Lamp not included.
    • Reflector dimensions: 20.1" long x 9.6" wide x 7.6" high.

    Learn More
  • Gavita HortiStar 96 1000 DE Reflector Replacement

    • HortiStar 1000 Double Ended has a replaceable Miro aluminum reflector with 96% efficiency.
    • Specifically designed for high frequency electronic ballasts it has a connection at each side of the lamp, removing the need for a frame wire inside the lamp. For double ended 1000 watt lamps.
    • The lamp cord terminal is shielded by a metal housing. Comes with 13' lamp cord.
    • Installation is very easy with two eye bolts.
    • Lamp not included.
    • Reflector dimensions: 20.1" long x 9.6" wide x 7.6" high.

    Learn More
  • Gavita M110 DE SR Reflector

    This replacement reflector for the Gavita Pro line and HortiStar requires no tools to install. The medium spread of this reflector with 110° beam angle is great for tents and small rooms. This is Gavita's most suitable reflector for single light set ups. The 110° is designed for uniformity and deep crop penetration in 1-2 fixture configurations. Suitable for double ended 750-1000W HPS. Learn More
  • Gavita Triplestar 600 Inlay Reflector Kit

    The reflector is one of the key elements of a successful fixture. You can have the best ballast and the best lamp, but without a good reflector you waste a lot of light, every day you use it. Keeping your reflectors in optimal condition is a must for good results. These are replacement reflector inserts for the Gavita Triplestar reflector (#906005). Learn More
  • Gavita ECM1 US 120 - External Contactor Module 120 Volt Plugs

    External Contactor Module (15A) with blue indication LED follows lights-on for main channel. Use ECMs to switch CO2, fertigation, heating etc. during lights-on or lights-off cycle. ECMs can be positioned close to the actual accessories. Cable outputs with female and male connector allow easy connection of accessories. Contains industrial contactor, suitable to power 15A loads or to power trigger input. Cage clamp connection for control cord allows easy installation. Learn More
  • Gavita ECM1 US 240 - External Contactor Module 240 Volt Plugs

    External Contactor Module (15A) with blue indication LED follows lights-on for main channel. Use ECMs to switch CO2, fertigation, heating etc. during lights-on or lights-off cycle. ECMs can be positioned close to the actual accessories. Cable outputs with female and male connector allow easy connection of accessories. Contains industrial contactor, suitable to power 15A loads or to power trigger input. Cage clamp connection for control cord allows easy installation. Learn More
  • MH 1000W Bulb - Nanolux (MaxPar) Double Ended - 6K with outer sleeve

    Introducing the first double-jacketed DE metal halide lamp to hit our industry. Available in 4K, 6K and 10K versions, this patent pending lamp is the only lamp that meets ANSI standards for open MH fixtures.

    The 4K spectrum is equivalent to your standard MH lamp. The 6K has a "cooler" spectrum and is the best lamp for straight vegetative use to encourage shorter node spacing and bushier plants. The 10K is used for the last 7-14 days of bloom to allow better ripening and finishing by enhancing the production of essential oils during this final stage of growth.

    NOTE: Due to it's double-jacketed design, this lamp will not fit into standard Gavita or ePapillon DE fixtures.

    Learn More
  • MH 1000 watt Bulb - Ultra Sun Double Ended - 4,000K

    The Ultra Sun® 1000 Watt Metal Halide DE 4,000°K lamp emits a blue/white spectrum that can be used during all stages of growth. Specifically designed for high frequency DE ballasts. DE lamp construction incorporates the electrical connection at each end of the lamp, removing the need for a frame inside. The absence of the frame eliminates shadows in the beam. For horizontal operation only. The jacket of this lamp is made from quartz glass. Oil from your hands can damage this lamp. Must be used in an enclosed fixture with a protective lens. Do not operate in an open style luminaire. Learn More
  • MH 1000 watt Bulb - Ultra Sun Double Ended - 6,000K

    The Ultra Sun® 1000 Watt Metal Halide DE 6,000°K lamp emits a blue spectrum that boosts foliage growth during vegetative cycles and encourages tighter nodal spacing. Specifically designed for high frequency DE ballasts. DE lamp construction incorporates the electrical connection at each end of the lamp, removing the need for a frame inside. The absence of the frame eliminates shadows in the beam. For horizontal operation only. The jacket of this lamp is made from quartz glass. Oil from your hands can damage this lamp. Must be used in an enclosed fixture with a protective lens. Do not operate in an open style luminaire. Learn More

Items 1 to 20 of 27 total

per page

Page:
  1. 1
  2. 2