SINCE 2000

Double Ended (DE) Components

7 Item(s)

per page

  • Nanolux Cloud Control NCCS Data Transfer Unit (DTU) - NEW/APP MODEL

    NOTICE: This is the newer APP version of the Nanolux DTU. The APP model no longer requires the use of a computer to access the software and program the lighting settings. Instead, everything is accomplished using an APP designed for both iPhones and Android devices. In addition, there are now three different models of RTU's (the USB device that plugs into each individual Nanolux NCCS ballast). It is very important to use the correct RTU with each of your ballasts, otherwise they will not perform as expected. Please refer to the descriptions for the individual components for complete details, or contact us and we will be happy to assist you.

    The Nanolux Cloud Control System was designed and engineered to provide a complete solution for the control of the lighting and environmental controls of a grow room. The NCCS system allows for precision control of all devices in a grow room through its simple and intuitive computer software program.

    At the heart of the NCCS is a free software program which allows you to specify all of the parameters of your lighting and environmental control settings in your room. The program is then downloaded from your computer to the DTU (data transfer unit). The DTU is the brain of the system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wire/essly with individual RTU (remote terminal unit) USB devices. The NCCS system currently allows for precision control of your lighting system with dimming, multiple lighting areas, high-temperature dimming features along with fan control. The NCCS will be adding C02 functions, humidity and temperature control, pH and nutrient control, pump control and remote camera features in the near future.

    The DTU is the brain of the NCCS system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wirelessly with individual RTU (remote terminal unit) USB devices.

    Learn More
  • Nanolux Cloud Control NCCS Data Transfer Unit (DTU) - OLD/WINDOWS MODEL

    NOTICE: This is the older WINDOWS version of the Nanolux DTU and is no longer available. It has been replaced with the new and improved APP model. The APP model no longer requires the use of a computer to access the software and program the lighting settings. Instead, everything is accomplished using an APP designed for both iPhones and Android devices. In addition, there are now three different models of RTU's (the USB device that plugs into each individual Nanolux NCCS ballast). It is very important to use the correct RTU with each of your ballasts, otherwise they will not perform as expected. Please refer to the descriptions for the individual components for complete details, or contact us and we will be happy to assist you.

    The Nanolux Cloud Control System was designed and engineered to provide a complete solution for the control of the lighting and environmental controls of a grow room. The NCCS system allows for precision control of all devices in a grow room through its simple and intuitive computer software program.

    At the heart of the NCCS is a free software program which allows you to specify all of the parameters of your lighting and environmental control settings in your room. The program is then downloaded from your computer to the DTU (data transfer unit). The DTU is the brain of the system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wire/essly with individual RTU (remote terminal unit) USB devices. The NCCS system currently allows for precision control of your lighting system with dimming, multiple lighting areas, high-temperature dimming features along with fan control. The NCCS will be adding C02 functions, humidity and temperature control, pH and nutrient control, pump control and remote camera features in the near future.

    The DTU is the brain of the NCCS system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wirelessly with individual RTU (remote terminal unit) USB devices.

    Learn More
  • Nanolux Cloud Control NCCS Remote Terminal Unit (RTU) - APP MODEL

    NOTE: This is the newer APP version of the Nanolux RTU. It is compatible only with the new APP DTU model and Nanolux APP ballasts. It is not compatible with the old CLOUD/WINDOWS DTU model (the model with only one antenna) and CLOUD/WINDOWS ballasts. If you need help putting together a Nanolux system with new and/or old equipment please contact us and we will be happy to assist you.

    Absolutely the coolest way to control your Nanolux lighting systems - from 1 to 999 ballasts or fixtures - and completely wireless! Nanolux DE fixtures have quickly replaced our Gavita sales because the fixtures offer virtually the same performance, with a lower failure rate and a lower price. They also manufacture some of our most popular DE and SE ballasts. The other great thing about Nanolux is their Cloud Control System, which blows the doors off the Gavita EL1 and EL2 controllers and any other lighting controller on the market today.

    With traditional grow lighting, you need to purchase controllers for every 4, 8 or 12 lights you have. These controllers are usually hard-wired by an electrician and plugged into a timer to control the light cycle. Not only does the NCCS do WAY MORE than a typical controller, it requires no hard wiring and is less expensive than a single 4-light controller, and controls up to 999 lights!

    The RTU is the data transfer communication device that is installed on the Nanolux Ballasts which allows them to communicate with the DTU. They receive information from the DTU communicating when to dim and turn on and off. They also send data back to the DTU on the status of the ballast.

    Learn More
  • Nanolux Cloud Control NCCS Remote Terminal Unit (RTU) - C1 MODEL

    NOTE: This is the new C1 version of the Nanolux RTU. It is compatible only with the new APP DTU and CLOUD/WINDOWS Nanolux ballasts. It is not compatible with the old CLOUD/WINDOWS DTU model (the model with only one antenna) odr APP ballasts. If you have a new APP DTU but your ballast is the old CLOUD/WINDOWS model, then this is the RTU you need to use. If you need help putting together a Nanolux system with new and/or old equipment please contact us and we will be happy to assist you.

    Absolutely the coolest way to control your Nanolux lighting systems - from 1 to 999 ballasts or fixtures - and completely wireless! Nanolux DE fixtures have quickly replaced our Gavita sales because the fixtures offer virtually the same performance, with a lower failure rate and a lower price. They also manufacture some of our most popular DE and SE ballasts. The other great thing about Nanolux is their Cloud Control System, which blows the doors off the Gavita EL1 and EL2 controllers and any other lighting controller on the market today.

    With traditional grow lighting, you need to purchase controllers for every 4, 8 or 12 lights you have. These controllers are usually hard-wired by an electrician and plugged into a timer to control the light cycle. Not only does the NCCS do WAY MORE than a typical controller, it requires no hard wiring and is less expensive than a single 4-light controller, and controls up to 999 lights!

    The RTU is the data transfer communication device that is installed on the Nanolux Ballasts which allows them to communicate with the DTU. They receive information from the DTU communicating when to dim and turn on and off. They also send data back to the DTU on the status of the ballast.

    Learn More
  • Nanolux Cloud Control NCCS Remote Terminal Unit (RTU) - OLD/WINDOWS MODEL

    NOTE: This is the older WINDOWS version of the Nanolux RTU. It is compatible only with the old CLOUD/WINDOWS DTU model (the model with only one antenna) and CLOUD/WINDOWS Nanolux ballasts. It is not compatible with the new APP RTU or APP ballasts. If you need help putting together a Nanolux system with new and/or old equipment please contact us and we will be happy to assist you.

    The Nanolux Cloud Control System was designed and engineered to provide a complete solution for the control of the lighting and environmental controls of a grow room. The NCCS system allows for precision control of all devices in a grow room through its simple and intuitive computer software program.

    At the heart of the NCCS is a free software program which allows you to specify all of the parameters of your lighting and environmental control settings in your room. The program is then downloaded from your computer to the DTU (data transfer unit). The DTU is the brain of the system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wire/essly with individual RTU (remote terminal unit) USB devices. The NCCS system currently allows for precision control of your lighting system with dimming, multiple lighting areas, high-temperature dimming features along with fan control. The NCCS will be adding C02 functions, humidity and temperature control, pH and nutrient control, pump control and remote camera features in the near future.

    The RTU is the data transfer communication device that is installed on the Nanolux Ballasts which allows them to communicate with the DTU. They receive information from the DTU communicating when to dim and turn on and off. They also send data back to the DTU on the status of the ballast.

    Learn More
  • Nanolux Remote DE Digital 1200/1000/825/750/660/600W 120/240 Volt Ballast - APP COMPATIBLE

    This is the latest and greatest version of the Nanolux Remote DE Ballast.

    Finally, growers have another choice besides Gavita and Philips to power their double-ended lights - the Nanolux Remote DE ballast. Not only does this ballast offer the same wattage selections, warranty and others specs as the Gavita and Philips do, it's also less expensive!

    Run your DE bulb in the reflector of your choice by using the latest Nanolux DER-II Remote Double Ended ballast. This ballast allows the user to choose various reflector options that allows the ballast to operate remotely like a traditional electronic ballast. The Nanolux DE has increased the standard 1150W to 1200W allowing the ballast to drive the bulb hard enough to produce a class leading luminous flux of 160,300lm. The Nanolux Remote DE is fully sealed and ready for even the most rugged environments. This ballast is NCCS ready, meaning you will be able to control it wirelessly on your computer through the Nanolux Cloud Control System. Like all of our ballasts the DE comes with Random Start, Soft Start, and Soft Dimming capabilities. All Nanolux ballasts are ETL listed meeting product safety standards.

    The Nanolux DE Remote commercial grade ballast offers class leading performance. It is compatible with all DE lamps and can be used in conjunction with all DE fixtures on the market. For use with 1000W double-ended lamps only.

    Learn More
  • MH 1000W Bulb - Nanolux (MaxPar) Double Ended - 6K with outer sleeve

    Introducing the first double-jacketed DE metal halide lamp to hit our industry. Available in 4K, 6K and 10K versions, this patent pending lamp is the only lamp that meets ANSI standards for open MH fixtures.

    The 4K spectrum is equivalent to your standard MH lamp. The 6K has a "cooler" spectrum and is the best lamp for straight vegetative use to encourage shorter node spacing and bushier plants. The 10K is used for the last 7-14 days of bloom to allow better ripening and finishing by enhancing the production of essential oils during this final stage of growth.

    NOTE: Due to it's double-jacketed design, this lamp will not fit into standard Gavita or ePapillon DE fixtures.

    Learn More

7 Item(s)

per page