SINCE 2000

EZ-Clone

EZ-Clone Plant Cloning Machines

13 Item(s)

per page

  • Ez-Clone 128 Low Pro Cutting System - Black

    The new EZ-Clone® Lo Pro 128 Black overall height has been reduced by four inches, while increasing the structural integrity of the new proprietary Lid and Reservoir. Manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leak-proof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent any possible tipping. It also includes four different colored cloning collars. Learn More
  • Ez-Clone Clear Rez 8 oz

    EZ-Clone® Clear Rez is a pH balanced, noninvasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all Hydroponic, Aeroponic and Soil applications. Keep it clear with Clear Rez. Learn More
  • EZ-Clone Classic 9 Cutting System - Black

    EZ-CLONE is proud to announce the introduction of the brand new and smallest Cloning System we have ever designed, the EZ-CLONE 9 SITE SYSTEM. Only taking up a mere 10 inch footprint, this little unit packs quite the punch and utilizes the same great Aeroponic Misting Technology as all of our larger systems. It’s perfect for cloning a variety of plants in small areas. The sleek design looks great and fits right at home in any kitchen or on any counter top. It’s available in black or white, and is manufactured from durable ABS plastic. It’s simple to assemble, operate and is so small that it can be moved very easily, even while filled with water. With its proven technology, this is the best system on the market for introducing new growers to the benefits of Aeroponic Plant Cloning. Learn More
  • Ez-Clone 128 Low Pro Cutting System - White

    The new EZ-Clone™ Lo Pro 128 overall height has been reduced by four inches, while increasing the structural integrity of the new proprietary Lid and Reservoir. Manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leak-proof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent any possible tipping. It also includes four different colored cloning collars.

    Learn More
  • EZ-Clone 32 Low Pro System - Black

    EZ-Clone® is proud to announce the introduction of the brand new 32 Site Low Pro System. The overall height has been reduced, while increasing the structural integrity of the new proprietary lid and reservoir. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of our larger systems. It’s perfect for cloning a variety of plants in small areas. Learn More
  • EZ-Clone Replacement Water Pump for 64 & 128 Units - 700 GPH

    These are replacement pumps for your EZ-Clone units. Excellent quality pumps with minimal heat output.
    Model 750 - 700 gph.
    Learn More
  • EZ-Clone 360 Sprayer Red

    Used in high output aeroponic gardening applications.
    Learn More
  • Ez-Clone 64 Low Pro Cutting System - Black

    The new EZ-Clone® 64 Lo Pro Black has been made from fully recyclable HDPE which is highly chemically resistant and extremely durable. Now has leak resistant cord outlet that allows multiple cords. Also a specially designed recessed drain that allows it to be highly protected and gives the ability to easily tip the unit for draining. These are just some of the 75 plus improvements designed specifically to make cloning even easier. Learn More
  • EZ-Clone Classic 9 Cutting System - White

    EZ-CLONE is proud to announce the introduction of the brand new and smallest Cloning System we have ever designed, the EZ-CLONE 9 SITE SYSTEM. Only taking up a mere 10 inch footprint, this little unit packs quite the punch and utilizes the same great Aeroponic Misting Technology as all of our larger systems. It’s perfect for cloning a variety of plants in small areas. The sleek design looks great and fits right at home in any kitchen or on any counter top. It’s available in black or white, and is manufactured from durable ABS plastic. It’s simple to assemble, operate and is so small that it can be moved very easily, even while filled with water. With its proven technology, this is the best system on the market for introducing new growers to the benefits of Aeroponic Plant Cloning. Learn More
  • Ez-Clone 64 Low Pro Cutting System - White

    The new EZ-Clone® Low Pro 64 White has been made from fully recyclable HDPE which highly chemically resistant and extremely durable. Now has leak resistant cord outlet that allows multiple cords. Also a specially designed recessed drain that allows it to be highly protected and gives the ability to easily tip the unit for draining. These are just some of the 75 plus improvements designed specifically to make cloning even easier.

    Learn More
  • EZ-Clone 16 Low Pro System - Black

    EZ-Clone® is proud to announce the introduction of the brand new 16 Site Low Pro System. The overall height has been reduced, while increasing the structural integrity of the new proprietary lid and reservoir. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of our larger systems. It’s perfect for cloning a variety of plants in small areas.

    Learn More
  • Ez-Clone Neoprene Insert Soft

    Specially designed for use in most aeroponic cloners. Ez-Clone cloning collars are manufactured from a sterile material that is designed to hold and protect your cuttings without damaging any of the plant's delicate tissues. Pre-slit for easy insertion of cuttings.

    Learn More
  • EZ-Clone Replacement Water Pump for 16 & 32 Units - 320 GPH

    These are replacement pumps for your EZ-Clone units. Excellent quality pumps with minimal heat output.
    Model 450 - 320 gph.
    Learn More

13 Item(s)

per page