Plumbing Materials & Fittings

Kit includes (1) - 1/2" Bulkhead Fitting, (1) - 3/4" Bulkhead fitting, (2)
- extensions, and (2) - flood/drain screens.

These fittings require a ...

• Interior threads accept 3/4" standard pipe thread
  
• Use as ebb and flow fittings and also as bulkhead fittings
  
• Increased versatility: ...

• Interior threads accept 3/4" standard pipe thread
  
• Use as ebb and flow fittings and also as bulkhead fittings
  
• Increased versatility: ...

• Interior threads accept 3/4" standard pipe thread
• Use as ebb and flow fittings and also as bulkhead fittings
• Increased versatility: thread PVC pipe ...

• Interior threads accept 3/4" standard pipe thread
• Use as ebb and flow fittings and also as bulkhead fittings
• Increased versatility: thread PVC pipe ...

This adapter allows you to connect a piece of 3/4" tubing to a piece of 1/2" tubing.

This adapter has 1/2" female pipe threads on one side, and a 1/2" barbed fitting on the other.

This adapter has 1/2" female pipe threads on one side, and a 1/4" barbed fitting on the other.

This adapter has 1/2" male pipe threads on one side, and a 1/2" barbed fitting on the other.

This adapter has 1/2" male pipe threads on one side, and a 3/4" barbed fitting on the other.

This is a nifty item to have. Perfect for hydroponic systems in situations where you need to remove the tray and you want to leave the pump in the reservoir. It takes only seconds to disconnect and ...

This is a nifty item to have. Perfect for hydroponic systems in situations where you need to remove the tray and you want to leave the pump in the reservoir. It takes only seconds to disconnect and ...

This adapter has 1/2" male pipe threads on one side, and a 1/2" barbed tee on the other.

How does it work? Water and nutrients are pumped through the fill/drain fitting into the growing tray. When the water/nutrient level gets to the top of the Overflow Fitting ...

This kit consists of both the Fill/Drain Fitting w/screen and the Overflow fitting w/screen.

How does it work? Water and nutrients are pumped through the Fill/Drain Fitting (sold separately) into the growing tray. When the water/nutrient level gets to the top of the Overflow Fitting, water ...

This is a replacement screen for the A.H. Overflow Fitting.

For making your own bucket systems or renewing your old ones.

For making your own bucket systems or renewing your old ones.

For making your own bucket systems or renewing your old ones.

The Farm Kit includes the drip ring w/tee, pumping column w/support tube, drain level tube w/elbow and 1/2" grommet, 1/2" ...

For making your own bucket systems or renewing your old ones.

The Pumping Column Support Tube is the plastic tube that holds the Pumping Column (sold separately).

These fittings have barbed fittings on both sides and are used to connect two pieces of flexible tubing together.

These fittings have barbed fittings on both sides and are used to connect two pieces of flexible tubing together.

These fittings have barbed fittings on both sides and are used to connect two pieces of flexible tubing together.

Used to fasten 1/2'' tubing to the side of a tray, bucket, etc. and allow for easy access.

This is a great dripper for hydroponic systems that works well under low pressure. The advantage of the Angle Stake is its long neck which holds the tubing securely in place. The angle of the stake ...

This is a great dripper for hydroponic systems that works well under low pressure. It has three different flow rates, plus a shut-off, in case you remove a plant. Works with our 0.15'' Drip Tubing.

This is a great dripper for hydroponic systems that works well under low pressure. Basket Drippers help oxygenate water by splitting it up into 6 grooves just below the cage. The stake also ...

Use these little brass fittings to attach 0.15" Drip Tubing to the black plastic 1/2'' main tubing in your drip system. Use the Brass Fitting Insertion Tool to both punch a hole in the 1/2'' tubing ...

This tool is used to both punch a hole in 1/2'' flexible tubing and to insert Brass Fittings into the tubing.

These just hold the drip tubing in place, but do not regulate the flow. They work with 1/4" Drip Tubing.

These just hold the drip tubing in place, but do not regulate the flow. These support stakes have the advantage of working with just about all diameters of drip tubing, including the ...

These fittings require a 1-3/8" hole to be drilled in your flood tray. After inserting an Ebb & Flow Outlet Fitting into the tray, use 1/2", 3/4" or 1" tubing ...

These 90 degree elbows work with most 1/2" flexible poly or vinyl tubing.

These 90 degree elbows work with most 3/4" flexible poly or vinyl tubing.

This fitting connects 1/2" tubing to a hose bib or 3/4" male fitting. Use in conjunction with our Economy Drain Assemblies to direct the flow of water.

These float valves can be installed in your reservoir and attached to something like a Rubbermaid trash can filled with water or dilute nutrient solution to increase the capacity of your ...

These float valves can be installed in your reservoir and attached to something like a Rubbermaid trash can filled with water or dilute nutrient solution to increase the capacity of your ...

These float valves can be installed in your reservoir and attached to something like a Rubbermaid trash can filled with water or dilute nutrient solution to increase the capacity of your ...

Grommets are used to attach barbed fittings to trays, buckets, etc.

The 1/2" Grommet accomodates all the 1/2'' Barbed Fittings we sell. It's the same fitting used to attach the ...

Grommets are used to attach barbed fittings to trays, buckets, etc.

The 1/2" Grommet accomodates all the 1/2'' Barbed Fittings we sell. It's the same fitting used to attach the ...

Grommets are used to attach barbed fittings to trays, buckets, etc.

The 1/2" Grommet accomodates all the 1/2'' Barbed Fittings we sell. It's the same fitting used to attach the ...

Used to fasten 1/2'' tubing to water pumps, etc. so that the tubing does not slip off.

Used to fasten 3/4'' tubing to water pumps, etc. so that the tubing does not slip off.

Use Shut-Off Valves to control the flow of liquids. The 1/2" valve makes a water-tight seal when used in conjunction with a 1/2" Grommet.

Use Shut-Off Valves to control the flow of liquids. The 1/2" valve makes a water-tight seal when used in conjunction with a 1/2" Grommet.

Use Shut-Off Valves to control the flow of liquids. The 3/4" valve makes a water-tight seal when used in conjunction with a 3/4" Grommet.

These are the same sprayers used in all of the EZ Clone systems. Replace your old clogged sprayers or create your own aeroponic system.

Drilling your own manifold?  Use a 10/24 ...

Create your own aeroponic system! These Sprayers can be used in conjunction with the Micro-Spray Adapters. They will also attach to our 1/4" Drip Tubing.

They are available in ...