SINCE 2000

Adjust A Wing

Adjust-A-Wing Grow Light Reflectors The Adjust-A-Wing line of reflectors has been a mainstay of commercial indoor growers for many years. Their wide spread makes them a great choice for installations where there are long rows of multiple lights, allowing for an overlapping light distribution pattern. The reflectors can be adjusted to a wider spread and positioned very close to the plants for installations where the ceiling height is low, or they can be adjusted to a narrower spread and hung higher to reduce canopy temperature or even higher to reduce light levels for younger, more sensitive plants. You can also use one of their Super Spreaders to further eliminate the hot spot directly under the lamp and redirect this part of the light off to the sides for more even light coverage. The material they use to create the reflectors is exceptionally reflective, thus minimizes light loss.

17 Item(s)

per page

  • 400 HPS Adjust-A-Wing DIGITAL Grow Light System

    Digital ballasts offer many advantages over magnetic ballasts, including lower energy consumption, less heat production, less noise (virtually silent), higher lumen output and lower lumen depreciation (lumen output of lamp doesn't drop as quickly each month as it does with a magnetic ballast).

    These lighting systems come complete with everything you need to grow plants indoors, including the bulb, ballast, reflector, socket assembly, 15' lamp cord and wire hooks for hanging reflector. They are pre-wired and take only a couple of minutes to setup.

    These systems come with the best digital ballast in the business - the Lumatek Digital Ballast.

    Learn More

    As low as: $103.18

    Out of stock

  • 600 HPS Adjust-A-Wing Grow Light System

    These lighting systems come complete with everything you need to grow plants indoors, including the bulb, ballast, reflector, socket assembly, 15' lamp cord, wire hooks for hanging reflector and instructions. They are pre-wired and take only a couple of minutes to setup.

    Most magnetic (non-digital) ballast assemblies feature a voltage selector switch, which means that you can switch them from 110/120V to 220/240V in just seconds and without any rewiring. The 15' heavy duty detachable lamp cord with it's quick-disconnect adapter makes installation a snap.

    All bulbs come with a 1-year warranty (since light intensity and yield diminish substantially after 6 months you will probably want to replace your bulbs every 6-8 months for optimal performance anyway, so you're covered!). All ballasts feature either a 2, 3 or 5-year warranty (depending on which ballast you choose).

    Learn More

    As low as: $198.77

  • Super Spreader Large

    The ALL NEW Super-Spreader® combines common sense and innovation with advancements in effective surface technology to produce a truly Super Light Spreader! The new design is attractive, lightweight and easy to install. The 'Spreader Heads' are made from 97% reflective glass-coated aluminum with a prismatic micro-textured surface. This incredible alloy is super cool, very reflective and creates even light distribution. The prismatic surface reflects and redirects light in a selective 4-way pattern for incredible results!

    Learn More
  • Adjust-A-Wing Socket w/Cord

    This is a replacement socket assembly only. Includes lamp cord.

    Learn More
  • Adjust-A-Wing Enforcer Reflector - Large

    Adjust-A-Wings® Enforcer series reflectors are made using Chinese made reflective stucco material. They include a molded plastic junction box with socket, pre-wired lamp cord and all parts required for assembly.

    Learn More
  • Adjust-A-Wing Avenger Large Reflector w/Cord

    The "Adjustable Light Spread" allows growers to create ideal lighting conditions across all stages of plant growth for increased vitality, health and yield. Made of 95% reflective German aluminum. Twice the power and efficiency of most other reflectors. Increase the growing area under each lamp by up to 75%. Increase yield per lamp up to 50%. Sold in 17 countries across 4 continents, Adjust-A-Wings® are the "reflectors of choice" for many of the world's top growers!

    Learn More
  • Adjust-A-Wing Socket - No Cord

    Replacement socket only. Does not include reflector or lamp cord.

    Learn More
  • Super Spreader for Adjust-A-Wings Large Double Ended

    Creates wider, more even light spread. Eliminates “hot spots” and “shady edges”. Allows closer light placement for increased power. Reduces heat at plant level by at least 9ºF. Increase your yields using less lights! Grow right through summer... No problem! New lightweight 95% reflective super alloy. Prismatic surface spreads light more evenly. Compatible with Large Adjust-A-Wings Double Ended Reflectors.

    Learn More
  • Adjust-A-Wing Avenger DE Reflector

    Made specifically for double ended 1000W HPS horticulture lamps (not included). 95% reflective proprietary textured German aluminum. Unique double ended constructions allows doe maximum optical efficiency and uniformity. Full spectrum DE Lamps used in the fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/lumen maintenance (up to 90% PAR at 10,000 hrs of operation).

    Socket and lamp cord included.

    Reflector Dimensions: 27.6"L x 39.5 to 34.5"W - Height varies by width.

    Learn More
  • 600 HPS Adjust-A-Wing DIGITAL Grow Light System

    Digital ballasts offer many advantages over magnetic ballasts, including lower energy consumption, less heat production, less noise (virtually silent), higher lumen output and lower lumen depreciation (lumen output of lamp doesn't drop as quickly each month as it does with a magnetic ballast).

    These lighting systems come complete with everything you need to grow plants indoors, including the bulb, ballast, reflector, socket assembly, 15' lamp cord and wire hooks for hanging reflector. They are pre-wired and take only a couple of minutes to setup.

    Learn More

    As low as: $260.55

  • 1000 HPS Adjust-A-Wing Grow Light System

    These lighting systems come complete with everything you need to grow plants indoors, including the bulb, ballast, reflector, socket assembly, 15' lamp cord, wire hooks for hanging reflector and instructions. They are pre-wired and take only a couple of minutes to setup.

    Most magnetic (non-digital) ballast assemblies feature a voltage selector switch, which means that you can switch them from 110/120V to 220/240V in just seconds and without any rewiring. The 15' heavy duty detachable lamp cord with it's quick-disconnect adapter makes installation a snap.

    All bulbs come with a 1-year warranty (since light intensity and yield diminish substantially after 6 months you will probably want to replace your bulbs every 6-8 months for optimal performance anyway, so you're covered!). All ballasts feature either a 2, 3 or 5-year warranty (depending on which ballast you choose).

    Learn More

    As low as: $224.65

  • Super Spreader Medium

    The ALL NEW Super-Spreader® combines common sense and innovation with advancements in effective surface technology to produce a truly Super Light Spreader! The new design is attractive, lightweight and easy to install. The 'Spreader Heads' are made from 97% reflective glass-coated aluminum with a prismatic micro-textured surface. This incredible alloy is super cool, very reflective and creates even light distribution. The prismatic surface reflects and redirects light in a selective 4-way pattern for incredible results!

    Learn More
  • Adjust-A-Wing Enforcer Reflector - Medium

    Adjust-A-Wings® Enforcer series reflectors are made using Chinese made reflective stucco material. They include a molded plastic junction box with socket, pre-wired lamp cord and all parts required for assembly.

    Learn More
  • Adjust-A-Wing Avenger Large Reflector - No Cord

    The "Adjustable Light Spread" allows growers to create ideal lighting conditions across all stages of plant growth for increased vitality, health and yield. Made of 95% reflective German aluminum. Twice the power and efficiency of most other reflectors. Increase the growing area under each lamp by up to 75%. Increase yield per lamp up to 50%. Sold in 17 countries across 4 continents, Adjust-A-Wings® are the "reflectors of choice" for many of the world's top growers!

    Learn More
  • Adjust-A-Wing Avenger Medium Reflector w/Cord

    The "Adjustable Light Spread" allows growers to create ideal lighting conditions across all stages of plant growth for increased vitality, health and yield. Made of 95% reflective German aluminum. Twice the power and efficiency of most other reflectors. Increase the growing area under each lamp by up to 75%. Increase yield per lamp up to 50%. Sold in 17 countries across 4 continents, Adjust-A-Wings® are the "reflectors of choice" for many of the world's top growers!

    Learn More
  • Adjust-A-Wing Avenger Large w/Cord - 6 Pack

    The "Adjustable Light Spread" allows growers to create ideal lighting conditions across all stages of plant growth for increased vitality, health and yield. Made of 95% reflective German aluminum. Twice the power and efficiency of most other reflectors. Increase the growing area under each lamp by up to 75%. Increase yield per lamp up to 50%. Sold in 17 countries across 4 continents, Adjust-A-Wings® are the "reflectors of choice" for many of the world's top growers!

    Learn More
  • 1000 HPS Adjust-A-Wing Avenger DE - Complete System

    DE (Double Ended) fixtures offer several advantages over traditional single ended (or "mogul-base") fixtures, including significantly longer lamp life (the light output doesn't degrade as quickly as it does with conventional lamps), higher PAR (plant-usable light) and lumen output, and no shading due to the wire frame used in conventional HPS lamps. You will absolutely notice an increase in plant growth and yield and you will actually save money over time because you will be purchasing replacement lamps less frequently.

    These lighting systems come complete with everything you need to grow plants indoors, including the bulb, ballast, reflector, socket assembly, 15' lamp cord, wire hooks for hanging reflector and instructions. They are pre-wired and take only a couple of minutes to setup. 

    The digital ballast included with this system operates on both 110/120V and 220/240V. The 15' heavy duty detachable lamp cord with it's quick-disconnect adapter makes installation and take-down a snap.

    Learn More

    As low as: $411.49

17 Item(s)

per page