Grounded plug at one end, bare wires (3) at the other. Lighter gauge wire makes this power cord more suitable for lower wattage appliances, such as Suncourt Duct Fans and Compact Fluorescents.

Grounded plug at one end, bare wires (3) at the other. Perfect for all of our exhaust fans (or anything else that needs power . . .).

This cord is for use only with SSI and SSVI ballasts purchased after March, 2005 that feature the Multi Volt Powercord feature.

Changing your ballast from 240V to 120V has never been ...

If you ever need to change the voltage on your ballast from 110V to 240V, you'll need to disconnect the existing 8' power cord & replace it with one of these (as well as changing 1 wire inside the ...

This cord is for use only with SSI and SSVI ballasts purchased after March, 2005 that feature the Multi Volt Powercord feature.

Changing your ballast from 120V to 240V has never been ...

This adapter cord has a 240V female MVP end on one side and a 120V male plug on the other. Use in conjunction with the 240V MVP cord in situations where your wall outlet is wired for 240V but the ...

Allows a Sunlight Supply/BGH lamp cord to be used with a Hydrofarm brand ballast.

Allows a Hydrofarm lamp cord to be used with a Sun System brand ballast.

15' Hydrofarm Male Lock & Seal Lamp Cord (UL listed). Male connector plugs into any Hydrofarm/Lumatek ballast and is wired to your socket assembly. Compatible with Lumatek Digital Ballasts which

15' Lamp Cord with molded quick-disconnect male plug that fits all Sunlight Supply ballasts (and BGH ballasts 2005 and newer) on one side, bare wires (black, white, green) on the other. ...

This 16 guage cord plug into the female lamp cord receptacle on a Sun System ballast then into the male plug on the lamp cord coming from the reflector. Allows growers to increase the distance ...

Replacement lamp cord receptacle for Sunlight Supply Sun System I and VI. Flaps to lock lamp cord in place.

Finally, a safe and very efficient way to water-cool your entire grow room! The Ice Box is an effective way to water-cool the air leaving your reflectors without adding a/c or more fans. It uses

These are just replacement hooks, since all Sunlight Supply Reflectors already ship with a pair in the box.

The iLS4 module enables the user to switch up to four 1000W systems by means of a low current 120Vac sense cord and allows for daisy chaining of additional 120V devices. Simply run your 120V ...

• 240 V supply (connect to main electrical panel or any 240 V outlet (4 wires) connected to a breaker up to 30 A), four (4) 120 V outputs
• One ...

The iLS4 module enables the user to switch up to four 1000W systems by means of a low current 120V sense cord and allows for daisy chaining of additional 240V devices. Simply run your 240V ...

The Equalizer - Hot Spot Diffuser

• Simply slide this unique product over a mugul base socket on most horizontal burning reflectors to filter & disperse the intense "hot spot" of ...

The Economy Digital Light Meter is an exceptional value. It features a 3-1/2” digit LCD display with Lux (lumens), Fc (footcandles), low battery, maximum and hold indicators. It has hold and

The Hanna Digital Light Meter has been designed for simplicity of use in taking rapid light measurements. The HI 97500 is provided with a light sensor connected by a flexible coaxial cable ...

Get accurate light readings at an affordable price with the Hydrofarm Digital Light Meter. Features include a handy remote probe and 3 scales for precise readings.

Measures up to ...

The right amount of light will make your plants prosper. You can easily monitor the footcandles your plants are receiving, as well as your bulb's ongoing performance with the Hydrofarm Light Meter. ...

This is the junction box that holds the socket to the reflector on both the Max-89 and Solar Brite reflectors.

The ALL NEW Powerbox™ FLIPBOX™ allows any ballast to run 2 lights (non-simultaneously). The Powerbox™ FLIPBOX™ works with magnetic and new digital ballasts and allows you ...

This is a universal socket that will work with every MH and HPS bulb we sell, even the position-oriented Super MH bulbs.

This socket assembly works with most of the Sunlight Supply reflectors we sell, including the Super Sun, Maximizer, SunGro, Large Super and all vertical hoods. It includes the socket and the ...

• Flexible "pigtail" strain relief


• 5kv mogul base socket


• Aluminum socket cap


• 15' lamp cord with socket for ...

This socket assembly works with most of the Sunlight Supply reflectors we sell, including the Super Sun, Maximizer, SunGro, Large Super and all vertical hoods. It includes the socket ...

This socket assembly works with the Super Spectrum Reflecor by Sunlight Supply only. It includes the socket and the junction box, as well as the cord lock and wing nuts to attach to the ...

The WaterJacket is ideal for growers who live in hot climates or have difficulty cooling their bulbs with just passing air. The WaterJacket also eliminates the need to exhaust hot air from your ...